Changes

# Connect DSM camera to the main block

# Connect DSM camera to the main block

# Connect main block with power and ground wires either to the vehicles relay (see picture above) or power supply.

# Connect main block with power and ground wires either to the vehicles relay (see picture above) or power supply.

# The RX and TX cables from the main block have to be connected through the RJ-45 cable to the FMX640 device.  

# The RX and TX cables from the main block have to be connected through the RJ-45 cable to the FMX640 device. '''Pin can be 3/4 or 5/6 different RJ45 cable modification'''

# Connect FMX640 device with PWR and Ground to power supply or vehicle's relay (see picture above).  

# Connect FMX640 device with PWR and Ground to power supply or vehicle's relay (see picture above).  

# Connect DOUT (1,2,3,4) to relay in order to control immobilizer and DSM camera state.  

# Connect DOUT (1,2,3,4) to relay in order to control immobilizer and DSM camera state.