Changes

# Connect FMX640 device with PWR and Ground to power supply or vehicle's relay (see picture above).  

# Connect FMX640 device with PWR and Ground to power supply or vehicle's relay (see picture above).  

# Connect DOUT (1,2,3,4) to relay in order to control immobilizer and DSM camera state.  

# Connect DOUT (1,2,3,4) to relay in order to control immobilizer and DSM camera state.  

# Continue in configurator in order to set up the DSM camera [[here]].  

# Continue in configurator in order to set up the DSM camera [https://wiki.teltonika-gps.com/view/DSM_Configuration here].  

[[Category:DSM]]

[[Category:DSM]]