Changes

671 bytes added ,  11:45, 28 February 2023
no edit summary
Line 14: Line 14:     
'''NOTE: FMX640 device also needs SD Card to be inserted.'''
 
'''NOTE: FMX640 device also needs SD Card to be inserted.'''
 +
 +
Using the above information in regards to connection, please follow the below steps:
 +
 +
# Insert Micro SD Card into the DSM camera main block.
 +
# Connect DSM camera to the main block
 +
# Connect main block with power and ground wires either to the vehicles relay (see picture above) or power supply.
 +
# The RX and TX cables from the main block have to be connected through the RJ-45 cable to the FMX640 device.
 +
# Connect FMX640 device with PWR and Ground to power supply or vehicle's relay (see picture above).
 +
# Connect DOUT (1,2,3,4) to relay in order to control immobilizer and DSM camera state.
 +
# Continue in configurator in order to set up the DSM camera [[here]].
       
[[Category:DSM]]
 
[[Category:DSM]]
0

edits

Navigation menu