Changes

no edit summary
Line 14: Line 14:  
==Auto APN search==
 
==Auto APN search==
   −
This feature allows the device to select the correct APN automatically, if the APN settings are present in the APN list file. After the tracker turns ON it will automatically search APN settings depending on the inserted SIM card.
+
This feature allows the device to select the correct APN automatically, if the APN settings are present in the APN list file.  
 +
After the tracker turns ON it will automatically search APN settings depending on the inserted SIM card.
 
Note: Not all APN configurations are added to the APN list file. APN list can be checked [here]
 
Note: Not all APN configurations are added to the APN list file. APN list can be checked [here]
 
   
 
   
Line 34: Line 35:  
'''Port:'''
 
'''Port:'''
 
*Server Port
 
*Server Port
'''Data procotol'''
+
'''Data protocol'''
*TCP (Transmission control protocol) or UDP (User datagram protocol)
+
*TCP (Transmission control protocol) or UDP (User datagram protocol). Changing this parameter will alter how the device communication protocol. More information on the protocol differences for Teltonika devices can be found [https://wiki.teltonika-gps.com/view/Teltonika_Data_Sending_Protocols|here]
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
 +
 
    
==Server communication settings==
 
==Server communication settings==
Line 49: Line 59:  
'''Keep-alive ping timeout (s)'''
 
'''Keep-alive ping timeout (s)'''
 
*enables network ping after timeout to prevent link close by operator. For example, if the operator closes the active link after 15 minutes when no data is sent, you can set the "network ping" timeout to 10 minutes then the device sends a 0xFF byte to server to keep the link open. Keep-alive ping timeout should be always lower than Open Link Timeout.
 
*enables network ping after timeout to prevent link close by operator. For example, if the operator closes the active link after 15 minutes when no data is sent, you can set the "network ping" timeout to 10 minutes then the device sends a 0xFF byte to server to keep the link open. Keep-alive ping timeout should be always lower than Open Link Timeout.
 +
 +
 +
 +
 +
 +
    
==FOTA Web settings==
 
==FOTA Web settings==