737
edits
Changes
Template:FTX8XX/9XX Mobile Network (view source)
Revision as of 08:46, 5 September 2023
, 08:46, 5 September 2023no edit summary
==Mobile data settings==
==Mobile data settings==
[[File:FTC921_Mobile_data_settings.png|right|300 px]]
[[File:FTC SIM1.jpg|right|500px]]
These settings define the main parameters for {{{model|FTC881}}}. <br/ >
These settings define the main parameters for {{{model|FTC881}}}. <br/ >
'''Authentication type:'''
'''Authentication type:'''
* Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator. <br />
* Some operators use a specific type of authentication for GPRS sessions – CHAP or PAP. If any of these is used, APN should be entered as "chap:<APN>" or "pap:<APN>" respectively e.g. if the operator is using APN "internet" with CHAP authentication, it should be entered as "chap: internet". Information about APN and authentication type should be provided by your GSM operator. <br />
==Auto APN search==
This feature allows the device to select the correct APN automatically, if the APN settings are present in the APN list file. After the tracker turns ON it will automatically search APN settings depending on the inserted SIM card.
Note: Not all APN configurations are added to the APN list file. APN list can be checked [here]
[[File:FTC AUTO APN.jpg|right|500px]]
==Server settings==
==Server settings==
[[File:FTC921_Server_settings.png|right|300 px]]
[[File:FTC primary server.jpg|right|500px]]
'''Domain:'''
'''Domain:'''
*Server or Domain address, can be written either IP address or Domain.
*Server or Domain address, can be written either IP address or Domain.
'''Port:'''
'''Port:'''
*Server Port
*Server Port
'''Data procotol'''
*TCP (Transmission control protocol) or UDP (User datagram protocol)
==Server communication settings==
[[File:FTC_server_communication.jpg|right|500px]]
'''Open link timeout (s)'''
*The parameter is used to define a timeout between the fleet management device and the server. If the device has sent all records, device holds the link for duration of the configured timeout. “Open link timeout” will refresh after device sends a new record. If there is a need to keep a constant link with a server, increasing the value of the parameter is needed.
'''Response timeout (s)'''
*Is used to set a period of time waiting for the response from the server-side. If there is no response from the server during the timeout, the device will close the link and according to device configuration resend the same packet
'''Keep-alive ping timeout (s)'''
*enables network ping after timeout to prevent link close by operator. For example, if the operator closes the active link after 15 minutes when no data is sent, you can set the "network ping" timeout to 10 minutes then the device sends a 0xFF byte to server to keep the link open. Keep-alive ping timeout should be always lower than Open Link Timeout.
==FOTA Web settings==
'''domain'''
*Domain which points to FOTA Web.
'''Port'''
*FOTA Web port for connection to FOTA Web
'''Pinger port'''
*FOTA Web pinger port
[[File:FTC FOTA WEB.jpg|right|500px]]
