315
edits
Changes
→Protocol example
|
|
|-
|-
| 0x452
| '''**0x452'''
| Battery Fast charging mode switch status
| Battery Fast charging mode switch status
|
|
| 3
| 3
|-
|-
| rowspan="2" | 0x453
| rowspan="2" | '''*0x453'''
| rowspan="2" | Battery Fast charging mode switch
| rowspan="2" | Battery Fast charging mode switch
| rowspan="2" |
| rowspan="2" |
|}
|}
'''**''' - ''CAN ID to send CAN COMMAND'' <br />
'''*''' - ''CAN ID to receive value in Manual CAN of CAN COMMAND'' <br />
1. Enter correct '''CAN ID''' in ''Manual CAN tab''. In this case, the '''Frame ID''' in needed to be entered. Here, CAN ID is 0x300, so in the configurator the user will need to enter 300 instead of last three F values ''(FF0300FF)''. This means that it will take the data '''only''' from the '''ID 300'''.
1. Enter correct '''CAN ID''' in ''Manual CAN tab''. In this case, the '''Frame ID''' in needed to be entered. Here, CAN ID is 0x300, so in the configurator the user will need to enter 300 instead of last three F values ''(FF0300FF)''. This means that it will take the data '''only''' from the '''ID 300'''.