1. Enter correct '''CAN ID''' in ''Manual CAN tab''. In this case, the '''Frame ID''' in needed to be entered. Here, CAN ID is 0x300, so in the configurator the user will need to enter 300 instead of last three F values ''(FF0300FF)''. This means that it will take the data '''only''' from the '''ID 300'''. | 1. Enter correct '''CAN ID''' in ''Manual CAN tab''. In this case, the '''Frame ID''' in needed to be entered. Here, CAN ID is 0x300, so in the configurator the user will need to enter 300 instead of last three F values ''(FF0300FF)''. This means that it will take the data '''only''' from the '''ID 300'''. |