Changes

If ''Avg Const'' value is 10, new value must be present for 1 second to register the change to a new value. Internal sampling is done every 40 ms, so 25 samples are taken per second. To configure 5 seconds of averaging multiply 10 by 5 yielding 50 as ''Avg Const'' value. The same logic works if the device is in [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep mode]].<br />

If ''Avg Const'' value is 10, new value must be present for 1 second to register the change to a new value. Internal sampling is done every 40 ms, so 25 samples are taken per second. To configure 5 seconds of averaging multiply 10 by 5 yielding 50 as ''Avg Const'' value. The same logic works if the device is in [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep mode]].<br />

For Boolean values of 5τ, values is used, that means value change is taken when new values is averaged to more than 99.3%.

For Boolean values of 5τ, values is used, that means value change is taken when new values is averaged to more than 99.3%.

===For AIN values:===

===For Analog Inputs:===

Averaging follows RC exponential curve, see image below:

Averaging follows RC exponential curve, see image below:

[[Image:Fmb120_avg_const.png|300px|none]]

[[Image:Fmb120_avg_const.png|300px|none]]