178
edits
Changes
Template:FMB I/O settings (view source)
Revision as of 12:55, 27 November 2023
, 12:55, 27 November 2023→For Digital Inputs:
===For Digital Inputs:===
===For Digital Inputs:===
If ''Avg Const'' value is 10, new value must be present for 1 second to register the change to a new value. Internal sampling is done every 40 ms, so 25 samples are taken per second. To configure 5 seconds of averaging multiply 10 by 5 yielding 50 as ''Avg Const'' value. The same logic works if the device is in [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep mode]].<br />
If ''Avg Const'' value is 10, new value must be present for 1 second to register the change to a new value. Internal sampling is done every 40 ms, so 25 samples are taken per second. To configure 5 seconds of averaging multiply 10 by 5 yielding 50 as ''Avg Const'' value. The same logic works if the device is in [[{{{model|FMB1YX}}}_Sleep_modes#Deep_Sleep_mode|Deep Sleep mode]].<br />
===For Analog Inputs:===
===For Analog Inputs:===
Averaging follows RC exponential curve, see image below:
Averaging follows RC exponential curve, see image below:
