2
edits
Changes
no edit summary
|-
|-
|What is the best device to use DualCam with?
|What is the best device to use DualCam with?
|Our FMX125 family devices are integrated to work best with DualCam solution, these include FMB125, FMC125 or FMB225 FMC225.
|Our FMX125 family devices are integrated to work best with DualCam solution, these include [https://wiki.teltonika-gps.com/view/FMC125 FMC125], [https://wiki.teltonika-gps.com/view/FMB125 FMB125] or [https://wiki.teltonika-gps.com/view/FMB225 FMB225] [https://wiki.teltonika-gps.com/view/FMC225 FMC225].
|-
|-
|Firmware to install on FMX125 device for best DualCam support?
|Firmware to install on FMX125 device for best DualCam support?
|The latest current firmware to use on FMX125 devices is 03.27.13.Rev.663 and latest for DualCam solution is V2.2.3, please see the link for the latest Firmware versions [[DualCam_Firmware_errata|here]]
|The latest current firmware to use on FMX125 devices is 03.29.00.Rev.530 and latest for DualCam solution is V2.2.3, please see the link for the latest Firmware versions [[DualCam_Firmware_errata|here]]
|-
|-
|Picture quality received is very blurry, what can I do?
|Picture quality received is very blurry, what can I do?
|-
|-
|Is DualCam compatible with FMC225?
|Is DualCam compatible with FMC225?
|Dualcam is compatible with FMC225. As FMC225 is developed on the existing platform, it keeps all the functionalities from FMC125.
|Dualcam is compatible with FMC225. As [https://wiki.teltonika-gps.com/view/FMC225 FMC225] is developed on the existing platform, it keeps all the functionalities from [https://wiki.teltonika-gps.com/view/FMC125 FMC125].
|-
|-
|Having configured the device when activating DIN1 to take an image (Front & Rear), and additionally capture a video (5 before & 5 after), which element will be sent first, we get only the image but not the video.
|Having configured the device when activating DIN1 to take an image (Front & Rear), and additionally capture a video (5 before & 5 after), which element will be sent first, we get only the image but not the video.
|The first item to be addressed will be the photo, as it has a higher priority. This issue has been resolved in the new firmware version 03.27.13.Rev:661, where you can now select the priority for either video or photo.
|The first item to be addressed will be the photo, as it has a higher priority. This issue has been resolved in the new firmware version 03.27.13.Rev:661, where you can now select the priority for either video or photo.
|-
|Is it possible to configure the device to capture an image from either the front or rear camera exclusively using the image sending trigger?
|No, the device cannot be configured to capture an image from a single camera (either front or rear) using the image sending trigger. When the image sending trigger is activated, the device will send photos from both the front and rear cameras. Camera selection is only available for periodic image sending.
|-
|-
|In case there is no coverage and an on state is generated (DIN1 = 1), the images and videos are stored for later sending? This is not happening.
|In case there is no coverage and an on state is generated (DIN1 = 1), the images and videos are stored for later sending? This is not happening.