Changes

no edit summary
Line 24: Line 24:     
=='''PC CONNECTION (WINDOWS)'''==
 
=='''PC CONNECTION (WINDOWS)'''==
1. Power- up FTC961 with DC voltage (10-90V) power supply using power wires. LEDs should start blinking.
+
# Power- up FTC961 with DC voltage (10-90V) power supply using power wires. LEDs should start blinking, see “'''[[FTC961_LED_status|LED behaviour description]]'''”.  
 
+
# Connect device to computer using USB Type-C cable and install USB driver, see "[[#How to install USB drivers (Windows)|'''HOW TO INSTALL USB DRIVERS (WINDOWS)''']]".
2. Connect device to computer using USB Type-C cable and install USB driver, see “How to install USB drivers (Windows)
      
=='''HOW TO INSTALL USB DRIVERS (WINDOWS)'''==
 
=='''HOW TO INSTALL USB DRIVERS (WINDOWS)'''==
1. Please download COM port drivers from [https://wiki.teltonika-gps.com/images/d/d0/TeltonikaCOMDriver.zip here].
  −
  −
2. Extract and run TeltonikaCOMDriver.exe.
  −
  −
3. Click Next in driver installation window.
  −
  −
4. In the following window click Install button.
     −
5. Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the
+
# Please download COM port drivers from '''[[Media:TeltonikaCOMDriver.zip|here]]'''.
setup.
+
# Extract and run '''TeltonikaCOMDriver.exe'''.
 +
# Click '''Next''' in driver installation window.
 +
# In the following window click '''Install''' button.
 +
# Setup will continue installing the driver and eventually the confirmation window will appear. Click '''Finish''' to complete the setup.
    
=='''CONFIGURATION (WINDOWS)'''==
 
=='''CONFIGURATION (WINDOWS)'''==