2
edits
Changes
no edit summary
|Having configured the device when activating DIN1 to take an image (Front & Rear), and additionally capture a video (5 before & 5 after), which element will be sent first, we get only the image but not the video.
|Having configured the device when activating DIN1 to take an image (Front & Rear), and additionally capture a video (5 before & 5 after), which element will be sent first, we get only the image but not the video.
|The first item to be addressed will be the photo, as it has a higher priority. This issue has been resolved in the new firmware version 03.27.13.Rev:661, where you can now select the priority for either video or photo.
|The first item to be addressed will be the photo, as it has a higher priority. This issue has been resolved in the new firmware version 03.27.13.Rev:661, where you can now select the priority for either video or photo.
|-
|Is it possible to configure the device to capture an image from either the front or rear camera exclusively using the image sending trigger?
|No, the device cannot be configured to capture an image from a single camera (either front or rear) using the image sending trigger. When the image sending trigger is activated, the device will send photos from both the front and rear cameras. Camera selection is only available for periodic image sending.
|-
|-
|In case there is no coverage and an on state is generated (DIN1 = 1), the images and videos are stored for later sending? This is not happening.
|In case there is no coverage and an on state is generated (DIN1 = 1), the images and videos are stored for later sending? This is not happening.