Jump to content
  • EN

Template:TAT100 stable FW&SW changelog

From Teltonika Telematics Wiki
VERSION RELEASE DATE CONFIGURATOR CHANGES FIRMWARE CHANGES
Firmware version: 55.00.16.Rev.571
   BlueNRG version: 10.0.3.Rev.00 for TAT100 HW ver.: 31

   1.0.4.Rev.02 for TAT100 HW ver.: 62

   Configurator version: TAT_1.7.74_B.TAT1_R.8
2025.02.11 
   * None
   

   * Fixed an issue where the device got stuck with an open link and failed to go to sleep in an edge case.
   * Ported GPRS Authentication for Quectel modems.
   * Minor improvements on the modem and BlueNRG firmware.
VERSION RELEASE DATE CONFIGURATOR CHANGES FIRMWARE CHANGES
Firmware version: 55.00.16.Rev.569
   BlueNRG version: 10.0.3.Rev.00 for TAT100 HW ver.: 31

   1.0.3.Rev.00 for TAT100 HW ver.: 62

   Configurator version: 1.7.74_E.TAT1_R.7
2024.08.19 
   * Added an option to configure TLS functionality.
   * Added an option to configure SMS record sending.
   * Added an option to configure MQTT Azure and AWS support.
   * Added an option to configure I am alive feature.
   

   * Added TLS functionality feature.
   * Added SMS record sending feature.
   * Added MQTT Azure and AWS support.
   * Added I am alive feature.
   * Fixed X, Y and Z IO elements not being included with First Power On record.
   * Extended On Stop and On Move periodic timers to maximum value of 7 days.
   * Improvements to Static Navigation logic in no GPS situation. 
   * New AVL ID 69 value added (4 - no GPS in Static Navigation).
   * Improved Recovery mode trigger logic in Lost Sensor scenario.
   * Added error code when BLE sensor is lost.
VERSION RELEASE DATE CONFIGURATOR CHANGES FIRMWARE CHANGES
Firmware version: 55.00.16.Rev.564
   BlueNRG version: 10.4.12 for TAT100 HW ver.: 31

   0.4.12 for TAT100 HW ver.: 62

   Configurator version: 1.7.74_B.TAT1_R.6
2024.03.12 
   * Fixed configurator crash after firmware update.
   * Added cell ID I/O elements
   * Fixed error when disabling BLE features in configuration.
   * Added GSM area code I/O element
   * Simplified EYE sensor configuration.
   * Added Autonomous Alarm System feature. 
   

   * Fixed periodic timer starting in Recovery mode.
   * Improved backup tracker scan procedure.
   * Fixed issue with GPS fix with First Power On record.
   * Improved energy management in sleep mode when device is in motion.
   * Fixed crash on BLE sensor alarm.
   * Bluetooth scanning and data parsing optimization.
   * DNS resolve improvements.
   * Fixed periodic timer starting when tracking scenario selected as None.
   * Changed default movement sensitivity to 150 mG
   * Changed default GNSS mode to GLONASS, GPS and GALILEO
   * Fixed EYE sensor data multiplier for correct data displaying.
   * Fixed issue if GPRS is lost during record sending.
   * Fixed GPRS command processing in UDP mode.
   * Improved received SMS reading process.
   * Improved connection to Fota process.
   * Fixed BLE sensor data not being included in periodic records.
   * Improved static navigation logic. 
   * Improved Bluetooth scan stability.
   * Added BLE beacons for Recovery mode trigger.
   * Movement logic rework.
   * Added condition to stop GNSS search if less than 3 satellites found in the first 60 seconds.
Firmware version: 55.00.16.Rev.545
   BlueNRG version: 10.3.12 for TAT100 HW ver.: 31

   0.3.12 for TAT100 HW ver.: 62

   Configurator version: 1.7.16_E.TAT100.R23 RELEASE
2022.08.23 
   * No changes

   *Fixed issue with incorrectly detected SIM slot for eSIM devices.
Firmware version: 55.00.16.Rev.543
BlueNRG version: 10.3.12 for TAT100 HW ver.: 31
0.3.12 for TAT100 HW ver.: 62
Configurator version: 1.7.16_E.TAT100.R23 RELEASE 		2022.08.08 
   * Updated Teltonika Configurator version to set Central device default IMEI to 300000000000000
   * Added Recovery mode option
   * Added I/O element of Recovery Mode
   * Added more options of movement sensitivity threshold [50-1000mG]
   * Configurator for BLE FW and Backup FW was merged into one.

   *SMS command created for getting device statistics
   *Protection from writing other devices FW
   *Added condition to prevent modem waking up at midnight if scheduler is configured
   *Added reconfiguration mechanism that lets FW work with / without SMPS filterMissing
   *Fixed issue of missing 4th sensor's data with Monitoring operand
   *Fixed too frequent / unnecessary scans with all sensors configured as monitoring
   *Fixed sensors scan starting with monitoring operand when Backup tracker is configured
   *Backup tracker scan not starting right after
   *Time synchronization every 24 hours
   *Fixed LBS data sending issue
   *New AVL ID 20015 for Modem UpTime (in seconds)
   *Added response sending if recovery command is sent through GPRS
   *The next periodic record after Recovery mode deactivation being sent with AVL ID 20012 - fixed
   *Reduced EQ Core update frequency
   *Fixed battery consumption issue when GSM is jammed.
   *LED status changed from constant on to blinking mode to save the battery
   * Added Recovery mode feature
   * Implemented Recovery mode activation from the Backup tracking alarm
   * Added EYE sensors support
   * Fixed Minor bugs regarding the sensors
   * Fixed Short period Recovery Mode records
   * Extended Backup Tracker: Central device IMEI range
   * Backup tracker: Scanning logic has been changed, scan duration is not configurable anymore, it is up to 60 seconds by default now.
   * Implemented Record timestamp shift feature
   * Fixed BLE sensor records with wrong event ID being sent
   * Fixed BLE sensor record duplicates with On change operand
   * Fixed BLE sensor On Exit record not generating when switching to sleep mode
   * Fixed Custom1 sensor data in SMS being sent as NaN (empty)
   * Fixed duplicate BLE sensor data after waking up
   * Changed required packets amount in backup tracker scenario and minimal scan duration
   * Fixed backup tracker alarm not triggering just before wakeup
   * Fixed backup tracker not detecting enough packets during BLE scan
   * Periodic records do not affect backup tracker alarm record generation
Firmware version: 55.00.16.Rev.522
BlueNRG version: 10.2.21.Rev.01
Configurator version: 1.7.16_R.TAT100.R2 		2021.12.21 
   * Improved battery safety features
   * Fixed stuck download during FOTA update
   * Fixed device not restarting to update FW after FOTA download
   * Improved main device packet filtering
   * Improved battery voltage measurement
   * Fixed the device not restarting after FOTA WEB update when it happens at the same time as periodic record
   * Fixed random statistic losses
   * Fixed GNSS module status not being accurate in Teltonika Configurator
   * Improved static navigation mode
   * Fixed scheduler time resync timer not working properly
   * Fixed statistic not being deleted from RAM
Firmware version: 55.00.15.Rev.519
BlueNRG version: 10.2.14
Configurator version: 1.7.16_R.TAT100.R2 		2021.10.19 
   * Fixed fake movement detection on startup
   * Fixed problem when the device is stuck in On Stop tracking mode after reconfiguration
   * Added Power-On reason data and fixed version changes to device statistics
   * Fixed Backup tracker issue where the alarm mode is not immediately activated when the central device disappears
   * Fixed empty GSM I/O elements
   * Fixed an issue where UTC is added after each reconfiguration
   * Added record printing to Dump log
   * LBS data is not included in records if GNSS fix was caught
   * Fixed NTP timesync failure if offset is zero
   * Improved record creation (wake up from sleep) during Backup tracker alarms
   


   


   * Improved GNSS module control with Static Navigation and LBS
   * Added prevention from inappropriate record generation if the battery is low (HW watchdog)
   * Added statistic element for USB connected uptime
   * Added timestamp to BlueNRG serial prints
   * Minor improvement for BlueNRG firmware update via configurator
   * Added filter for LBS cell_id duplicates
   * Improved Bluetooth sensor record creation with 'On Change' operand
   * Added Bluetooth sensor support
   * Added condition to skip LBS data update if location source is only GNSS
   * Increased retries of AT+# command in order to avoid empty LBS data from modem
   * Changed Open link timeout to 15s
   * Fixed an issue where the tracking mode would change from the scheduler to periodic
   * Improved logic for multiple FOTA Web tasks update in the same connection
   * Implemented rule for additional connection to FOTA Web after baseband firmware update
   * Added accelerometer version information inside '.info' serial command
   * Fixed an issue with battery voltage I/O element when record saving is overlapping with a firmware update
   * Fixed Scheduler record sending at midnight
   * Fixed missed LBS values inside I/O elements
   * Fixed an issue when GNSS speed is not zero while the device is in a stationary position
   * General minor improvements
55.00.10.Rev.509
BlueNRG: 10.2.3_Rev.00
1.7.16_E.TAT100_04 		2021.05.10 
   * Added Test Connection button
   * Temporarily removed Secondary Server Settings
   * Tracking Period default value changed to 28800 (s)

   * Implemented Test Connection feature.
   * Added BlueNRG logging to DUMP files
   * Added LBS data logging to DUMP files
   * Added protection that blocks FMB firmware flash to AT devices
   * Added time-sync update with asset purpose command
   * Improved periodic record timer logic
   * Improved battery voltage measurement
   * Improved periodic GPRS data sending while USB is connected to the device
   * Disabled SMPS filter
   * Fixed record sending when movement is triggered at all times
   * Improved NTP time-sync
55.00.05.Rev.510
BlueNRG: 0.1.7 		2020.12.03 
   * Removed tracking scenarios
   * Removed speed source parameter
   * Removed record saving/sending without TS parameter
   * Removed LED Indication parameter
   * Removed NTP resync parameter

   * Implemented FOTA support.
   * Improved GNSS position capturing.
   * Reworked Periodic and Scheduler tracking counters.
   * Implemented device logging via USB.  
   * Implemented statistics acquisition to flash memory.
55.00.05.Rev.507
BlueNRG: 0.1.5 		2020.09.29 
   * Implemented GNSS Source configuration. Available options: BeiDou, GLONASS, Galileo and GPS.
   * Added I/O elements: Data Mode, GSM Signal, GNSS Status, GNSS PDOP, GNSS HDOP, Speed, GSM Cell ID, GSM Area Code, Battery Voltage, Active GSM Operator, ICCID, Coordinates ISO6709.
   * Added SMS command autorization via Login and Password logic.

   * Implemented 'Codec 8', 'Codec 8 Extended' and 'Codec 12' protocols.
   * Implemented NTP, NITZ and GNSS time synchronization sources.
   * Implemented ability to send GPRS data from device via TCP or UDP channels.
   * Implemented connection to server timeouts.
   * Ported TLS encryption functionality from other Teltonika devices.
   * Implemented Periodic and Scheduler tracking.
   * Implemented BlueNRG firmware update via GPRS. This function will be used to reflash BlueNRG firmware via FOTA WEB.
   * Added GSM number authorization logic.
Retrieved from "https://wiki.teltonika-gps.com/index.php?title=Template:TAT100_stable_FW%26SW_changelog&oldid=102358"