Template:FTX Data Sending Parameters ID
Teltonika devices send data in packets that follow a specific structure, as defined on our Codec page. Each parameter in a record is identified by a Data Sending ID (AVL ID). These IDs are used to extract the correct values from the hexadecimal data during processing on the server side.
This page lists all available AVL IDs for {{{model}}}. Differences in AVL IDs between the FT and legacy FMB platforms are described on the dedicated page. Property IDs in the AVL packet that differ between platforms are marked in bold.
The document is based on firmware version 3.0.3 or newer. AVL IDs are grouped into the following parameter groups:
Permanent I/O elements
{{#if: | } {{#if: | } {{#if: | } {{#if: | } {{#if: | } {{#if: | } {{#if: | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=1-WireII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=1-WireII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=1-WireII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=1-WireII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=1-WireII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=1-WireII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=1-WireII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=1-WireII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=1-WireII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: | } {{#if: | } {{#if: | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DOUT3} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=1-Wire} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=1-Wire} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DOUT1} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DOUT2} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=OBDII} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DOUT4} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=AIN3} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=AIN4} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DOUT3} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=DOUT4} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=BT} | }
| Property ID in AVL packet | Property Name | Bytes | Type | Min Value | Max Value | Multiplier | Units | Description | Parameter Group |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Digital Input 1 | 1 | Unsigned | 0 | 1 | - | - | State of digital input 1. | Permanent I/O elements |
| 2 | Digital Input 2 | 1 | Unsigned | 0 | 1 | - | - | State of digital input 2. | Permanent I/O elements |
| 3 | Digital Input 3 | 1 | Unsigned | 0 | 1 | - | - | State of digital input 3. | Permanent I/O elements |
| 4 | Pulse Counter (DIN1) | 4 | Unsigned | 0 | 4294967295 | - | - | Pulse counts between records on DIN1. | Permanent I/O elements |
| 5 | Pulse Counter (DIN2) | 4 | Unsigned | 0 | 4294967295 | - | - | Pulse counts between records on DIN2. | Permanent I/O elements |
| 6 | Analog Input 2 | 2 | Unsigned | 0 | 65535 | 0.001 | V | Analog input 2 value in millivolts (mV). | Permanent I/O elements |
| 9 | Analog Input 1 | 2 | Unsigned | 0 | 65535 | 0.001 | V | Analog input 1 value in millivolts (mV). | Permanent I/O elements |
| 16 | Total Odometer | 4 | Unsigned | 0 | 2147483647 | - | m | Virtual odometer value in meters (m). | Permanent I/O elements |
| 17 | Axis X | 2 | Signed | -8000 | 8000 | - | mg | Axis X value in milligravity (mg). | Permanent I/O elements |
| 18 | Axis Y | 2 | Signed | -8000 | 8000 | - | mg | Axis Y value in milligravity (mg). | Permanent I/O elements |
| 19 | Axis Z | 2 | Signed | -8000 | 8000 | - | mg | Axis Z value in milligravity (mg). | Permanent I/O elements |
| 20 | Battery Voltage 2 | 1 | Unsigned | 0 | 100 | - | % | Battery voltage for BLE device #2 | Permanent I/O elements |
| 21 | GSM Signal | 1 | Unsigned | 0 | 5 | - | - | GSM signal quality level from 0 to 5, where 0 means no connectivity and 5 means excellent signal. | Permanent I/O elements |
| 22 | Battery Voltage 3 | 1 | Unsigned | 0 | 100 | - | % | Battery voltage for BLE device #3 | Permanent I/O elements |
| 23 | Battery Voltage 4 | 1 | Unsigned | 0 | 100 | - | % | Battery voltage for BLE device #4 | Permanent I/O elements |
| 25 | Temperature 1 | 2 | Signed | -400 | 1250 | 0.1 | °C | Temperature reported by BLE device #1 | Permanent I/O elements |
| 26 | Temperature 2 | 2 | Signed | -400 | 1250 | 0.1 | °C | Temperature reported by BLE device #2 | Permanent I/O elements |
| 27 | Temperature 3 | 2 | Signed | -400 | 1250 | 0.1 | °C | Temperature reported by BLE device #3 | Permanent I/O elements |
| 28 | Temperature 4 | 2 | Signed | -400 | 1250 | 0.1 | °C | Temperature reported by BLE device #4 | Permanent I/O elements |
| 29 | Battery Voltage 1 | 1 | Unsigned | 0 | 100 | - | % | Battery voltage for BLE device #1 | Permanent I/O elements |
| 30 | OBD Number Of DTCS | 1 | ASCII | 0 | 255 | - | - | Number of Diagnostic Trouble Codes. | Permanent I/O elements |
| 31 | OBD Engine Load | 1 | Unsigned | 0 | 100 | - | % | Calculated engine load value, (%). | Permanent I/O elements |
| 32 | Coolant Temperature | 1 | Signed | -128 | 127 | - | °C | Engine coolant temperature, (°C). | Permanent I/O elements |
| 33 | Short Fuel Trim | 1 | Signed | -100 | 99 | - | % | Short term fuel trim 1, (%). | Permanent I/O elements |
| 34 | Fuel Pressure | 2 | Unsigned | 0 | 765 | - | kPa | Fuel pressure, (kPa). | Permanent I/O elements |
| 35 | Intake MAP | 1 | Unsigned | 0 | 255 | - | kPa | Intake manifold absolute pressure, (kPa). | Permanent I/O elements |
| 36 | OBD Engine RPM | 2 | Unsigned | 0 | 16384 | - | rpm | Value in revolutions per minute, (rpm). | Permanent I/O elements |
| 37 | OBD Vehicle Speed | 1 | Unsigned | 0 | 255 | - | km/h | Vehicle speed, (km\h). | Permanent I/O elements |
| 38 | Timing Advance | 1 | Signed | -64 | 64 | - | ° | Timing advance, (degrees °). | Permanent I/O elements |
| 39 | Intake Air Temperature | 1 | Signed | -128 | 127 | - | °C | Intake air temperature, (°C). | Permanent I/O elements |
| 40 | MAF | 2 | Unsigned | 0 | 65535 | 0.01 | g/s | MAF air flow rate, (g/s). | Permanent I/O elements |
| 41 | Throttle Position | 1 | Unsigned | 0 | 100 | - | % | Throttle position, (%). | Permanent I/O elements |
| 42 | Run Time Since Engine Start | 2 | Unsigned | 0 | 65535 | - | s | Run time since engine start, (s). | Permanent I/O elements |
| 43 | Distance Traveled Mil On | 2 | Unsigned | 0 | 65535 | - | km | Distance travelled with malfunction indicator lamp on, (km). | Permanent I/O elements |
| 44 | Relative Fuel Rail Pressure | 2 | Unsigned | 0 | 5178 | 0.1 | kPa | Relative fuel rail pressure, (kPa). | Permanent I/O elements |
| 45 | Direct Fuel Rail Pressure | 2 | Unsigned | 0 | 65535 | 10 | kPa | Direct fuel rail pressure, (kPa). | Permanent I/O elements |
| 46 | Commanded EGR | 1 | Unsigned | 0 | 100 | - | % | Commanded Exhaust Gas Recirculation, (%). | Permanent I/O elements |
| 47 | EGR Error | 1 | Signed | -100 | 100 | - | % | Exhaust gas recirculation error, (%). | Permanent I/O elements |
| 48 | OBD Fuel Level | 1 | Unsigned | 0 | 100 | - | % | Fuel level, (%). | Permanent I/O elements |
| 49 | Distance Since Codes Cleared | 2 | Unsigned | 0 | 65535 | - | km | Distance since codes cleared, (km). | Permanent I/O elements |
| 50 | Barometric Pressure | 1 | Unsigned | 0 | 255 | - | kPa | Barometric pressure, (kPa). | Permanent I/O elements |
| 51 | Control Module Voltage | 2 | Unsigned | 0 | 65535 | 0.001 | V | Control module voltage, (V). | Permanent I/O elements |
| 52 | Absolute Load Value | 2 | Unsigned | 0 | 25700 | 1 | % | Absolute load value, (%). | Permanent I/O elements |
| 53 | Ambient Air Temperature | 1 | Signed | -128 | 127 | - | °C | Ambient air temperature, (°C). | Permanent I/O elements |
| 54 | Time Run With MIL On | 2 | Unsigned | 0 | 65535 | - | min | Time run with malfunction indicator lamp on, (min). | Permanent I/O elements |
| 55 | Time Since Codes Cleared | 2 | Unsigned | 0 | 65535 | - | min | Time since trouble codes were cleared, (min). | Permanent I/O elements |
| 56 | Absolute Fuel Rail Pressure | 2 | Unsigned | 0 | 65535 | 10 | kPa | Absolute fuel rail pressure, (kPa). | Permanent I/O elements |
| 57 | Hybrid Battery Pack Life | 1 | Unsigned | 0 | 100 | - | % | Hybrid battery pack remaining life, (%). | Permanent I/O elements |
| 58 | Engine Oil Temperature | 1 | Unsigned | 0 | 215 | - | °C | Engine oil temperature, (°C). | Permanent I/O elements |
| 59 | Fuel Injector Timing | 2 | Signed | -21000 | 30200 | 0.01 | ° | Fuel injection timing, (degrees °). | Permanent I/O elements |
| 60 | OBD Fuel Rate | 2 | Unsigned | 0 | 32767 | - | l/100km | Engine fuel rate, (l/100km). | Permanent I/O elements |
| 67 | Battery Voltage | 2 | Unsigned | 0 | 65535 | 0.001 | V | Current voltage of the internal battery in millivolts (mV). | Permanent I/O elements |
| 68 | Battery Current | 2 | Unsigned | 0 | 65535 | 0.001 | A | Current being provided by internal device battery in milliamperes (mA). | Permanent I/O elements |
| 69 | GNSS Status | 1 | Unsigned | 0 | 4 | - | - | GNSS power status: 0 - Off, 1 - On with fix, 2 - On without fix, 3 - Sleeping. | Permanent I/O elements |
| 70 | PCB Temperature | 1 | Unsigned | 0 | 3 | - | - | Temperature of the device (printed circuit board). | Permanent I/O elements |
| 71 | Dallas Temperature ID 4 | 8 | Unsigned | 0 | 0xffffffffffffffff | - | - | Dallas (1-Wire) temperature sensor ID #4. | Permanent I/O elements |
| 72 | Dallas Temperature 1 | 4 | Signed | -550 | 1150 | 0.1 | °C | Indicates temperature value scanned by dallas (1-Wire) temperature sensor #1. | Permanent I/O elements |
| 73 | Dallas Temperature 2 | 4 | Signed | -550 | 1150 | 0.1 | °C | Indicates temperature value scanned by dallas (1-Wire) temperature sensor #1. | Permanent I/O elements |
| 74 | Dallas Temperature 3 | 4 | Signed | -550 | 1150 | 0.1 | °C | Indicates temperature value scanned by dallas (1-Wire) temperature sensor #3. | Permanent I/O elements |
| 75 | Dallas Temperature 4 | 4 | Signed | -550 | 1150 | 0.1 | °C | Indicates temperature value scanned by dallas (1-Wire) temperature sensor #4. | Permanent I/O elements |
| 76 | Dallas Temperature ID 1 | 8 | Unsigned | 0 | 0xffffffffffffffff | - | - | Dallas (1-Wire) temperature sensor ID #1. | Permanent I/O elements |
| 77 | Dallas Temperature ID 2 | 8 | Unsigned | 0 | 0xffffffffffffffff | - | - | Dallas (1-Wire) temperature sensor ID #2. | Permanent I/O elements |
| 78 | IButton ID | 8 | Unsigned | 0 | 0xffffffffffffffff | - | - | iButton ID. | Permanent I/O elements |
| 79 | Dallas Temperature ID 3 | 8 | Unsigned | 0 | 0xffffffffffffffff | - | - | Dallas (1-Wire) temperature sensor ID #3. | Permanent I/O elements |
| 86 | Humidity 1 | 2 | Unsigned | 0 | 1000 | 0.1 | %RH | Humidity level reported by BLE device #1 | Permanent I/O elements |
| 104 | Humidity 2 | 2 | Unsigned | 0 | 1000 | 0.1 | %RH | Humidity level reported by BLE device #2 | Permanent I/O elements |
| 106 | Humidity 3 | 2 | Unsigned | 0 | 1000 | 0.1 | %RH | Humidity level reported by BLE device #3 | Permanent I/O elements |
| 108 | Humidity 4 | 2 | Unsigned | 0 | 1000 | 0.1 | %RH | Humidity level reported by BLE device #4 | Permanent I/O elements |
| 113 | Battery charge level | 1 | Unsigned | 0 | 100 | - | % | Battery charge percentage at which indication occurs. | Permanent I/O elements |
| 155 | Manual Geofence ID | 1 | Unsigned | 0 | 3 | - | - | Used to identify the specific manual geofence scenario, which generated the event. | Permanent I/O elements |
| 179 | Digital Output 1 | 1 | Unsigned | 0 | 1 | - | - | State of digital output 1. | Permanent I/O elements |
| 180 | Digital Output 2 | 1 | Unsigned | 0 | 1 | - | - | State of digital output 2. | Permanent I/O elements |
| 181 | GNSS PDOP | 2 | Unsigned | 0 | 500 | 0.1 | - | GNSS position dilution of precision. Normal PDOP is below 3 – the lower the number, the more accurate reported location is. | Permanent I/O elements |
| 182 | GNSS HDOP | 2 | Unsigned | 0 | 500 | 0.1 | - | GNSS horizontal dilution of precision. Normal HDOP is below 2 – the lower the number, the more accurate reported location is. | Permanent I/O elements |
| 200 | Sleep Mode | 1 | Unsigned | 0 | 2 | - | - | Current device sleep state: 0 – normal operating mode, 3 – online deep sleep, 4 – Deep sleep, 5 – Power off sleep. | Permanent I/O elements |
| 205 | GSM Cell Id | 2 | Unsigned | 0 | 65535 | - | - | GSM cell tower identification number. | Permanent I/O elements |
| 206 | GSM Area Code | 2 | Unsigned | 0 | 65535 | - | - | Location area code (LAC) that depends on GSM operator. It provides unique number which is assigned to a set of base GSM stations. | Permanent I/O elements |
| 237 | Network Type | 1 | Unsigned | 0 | 99 | - | - | Network type to which device is connected. | Permanent I/O elements |
| 239 | Ignition | 1 | Unsigned | 0 | 1 | - | - | Indicates the state of ignition, according to the selected source. | Permanent I/O elements |
| 240 | Movement | 1 | Unsigned | 0 | 1 | - | - | Indicates movement state of the device, that determines the data acquisition mode currently used: 0 - on stop. 1 - moving. | Permanent I/O elements |
| 241 | GSM Operator Code | 4 | Unsigned | 0 | 4294967295 | - | - | Currently used GSM Operator code. | Permanent I/O elements |
| 242 | ManDown/Fall Down | 1 | Unsigned | 0 | 1 | - | - | 0 – ManDown diactivated 1 – ManDown is acive | Permanent I/O elements |
| 251 | Idling | 1 | Unsigned | 0 | 1 | - | - | 0 – moving, 1 – idling | Permanent I/O elements |
| 253 | EcoDriving type | 1 | Unsigned | 1 | 3 | - | - | Type of detected event (1 = acceleration, 2 = braking, 3 = cornering) | Permanent I/O elements |
| 254 | EcoDriving value | 1 | Unsigned | 0 | 255 | 0.01 | G|rad | Peak of detected event in hundredths of g | Permanent I/O elements |
| 256 | VIN | 17 | ASCII | 0 | 0xff | - | - | Vehicle Identification Number. | Permanent I/O elements |
| 262 | Digital Input 4 | 1 | Unsigned | 0 | 1 | - | - | State of digital input 4. | Permanent I/O elements |
| 281 | Fault Codes | 128 | ASCII | 0 | 128 | - | - | Fault Codes. | Permanent I/O elements |
| 303 | Instant Movement | 1 | Unsigned | 0 | 1 | - | - | Instant movement without delay. | Permanent I/O elements |
| 314 | BLE Beacon List | 1024 | HEX | 0 | 1024 | - | - | List of Beacon Ids | Permanent I/O elements |
| 380 | Digital Output 3 | 1 | Unsigned | 0 | 1 | - | - | State of digital output 3. | Permanent I/O elements |
| 383 | Accel calibration status | 1 | Unsigned | 0 | 3 | - | - | Accelerometer calibration status: 0 - not calibrated (empty), 1 - calibrated, but not fully (present), 2 - disabled, 3 - fully calibrated (full). | Permanent I/O elements |
| 385 | BLE Beacon data | 2603 | HEX | 0 | 2603 | - | - | List of Beacon Ids and their data | Permanent I/O elements |
| 386 | Time from last fix | 2 | Unsigned | 0 | 65535 | - | sec | How much time has elapsed since the last GNSS fix. Will be "0" if location in record is with GNSS fix (has fix) or there was no fix since startup. | Permanent I/O elements |
| 389 | OEM Total Mileage | 4 | Unsigned | 0 | 0xffffffff | - | km | Total mileage received by requesting vehicle specific PID, (km). | Permanent I/O elements |
| 390 | OEM Fuel Level | 4 | Unsigned | 0 | 0xffffffff | 0.1 | l | Fuel level in litres received by requesting vehicle specific PID, (l). | Permanent I/O elements |
| 391 | Private/Business mode | 1 | Unsigned | 0 | 255 | - | - | Private/Business mode where: 0 - Private mode OFF (Business mode ON), 1 - Private mode ON (Business mode OFF) | Permanent I/O elements |
| 392 | Button Click | 1 | HEX | 0x01 | 0x43 | - | - | Button ID and Action Value 0xXY X - button ID: 0 - alarm button 1 - power button 2 - button 1 3 - button 2 4 - button 3 Y - action: 1 - 1 click 2 - 2 clicks 3 - long click | Permanent I/O elements |
| 396 | Seco | 1 | Unsigned | 0 | 2 | - | - | 0 – SECO dout off 1 – SECO dout pulsing 2 – SECO dout on | Permanent I/O elements |
| 401 | OEM Oil level | 4 | Unsigned | 0 | 0xffffffff | - | mm | Oil level received by requesting vehicle specific PID, (l). | Permanent I/O elements |
| 402 | OEM Dist To Next Service | 4 | Unsigned | 0 | 0xffffffff | - | km | Distance till next service received by requesting vehicle specific PID, (km). | Permanent I/O elements |
| 410 | OEM Battery charge state | 1 | Unsigned | 0 | 1 | - | - | 0 - Not charging, 1 - Charging. | Permanent I/O elements |
| 411 | OEM Battery charge level | 1 | Unsigned | 0 | 100 | - | % | Represents battery charged level, (%). | Permanent I/O elements |
| 412 | OEM Battery power consumption | 2 | Unsigned | 0 | 65535 | - | kWh/100km | Represents average battery power consumption, (kWh/100km). | Permanent I/O elements |
| 449 | Ignition On Counter | 4 | Unsigned | 0 | 2147483647 | - | sec | The feature counts the time spent with the active ignition and the counter value can be set according to your needs. After the ignition is turned OFF and later turned ON again, "Ignition on counter" value will continue counting (from the last saved value). | Permanent I/O elements |
| 485 | BLE scanned devices | 2 | Unsigned | 0 | 65535 | - | - | Number of scanned bluetooth low energy devices | Permanent I/O elements |
| 523 | Battery Voltage 5 | 1 | Unsigned | 0 | 100 | - | % | Battery voltage for BLE device #5 | Permanent I/O elements |
| 525 | Humidity 5 | 2 | Unsigned | 0 | 1000 | 0.1 | %RH | Humidity level reported by BLE device #5 | Permanent I/O elements |
| 540 | OBD Throttle position group | 1 | Unsigned | 0 | 100 | - | % | Throttle Position Value From PID Group, (%). | Permanent I/O elements |
| 541 | OBD Commanded Equivalence R | 1 | Unsigned | 0 | 200 | 0.01 | - | Fuel-Air Commanded Equivalence Ratio. | Permanent I/O elements |
| 542 | OBD Intake MAP 2 bytes | 2 | Unsigned | 0 | 2048 | - | kPa | Intake Manifold Absolute Pressure, (kPa). | Permanent I/O elements |
| 543 | OBD Hybrid System Voltage | 2 | Unsigned | 0 | 1024 | - | V | Hybrid vehicle system voltage, (V). | Permanent I/O elements |
| 544 | OBD Hybrid System Current | 2 | Signed | -3277 | 3277 | - | A | Hybrid vehicle system current, (A). | Permanent I/O elements |
| 641 | ICCID | 22 | ASCII | 0 | 22 | - | - | Integrated circuit card identification number (ICCID) - unique code that includes a SIM card’s country, home network, and identification number. | Permanent I/O elements |
| 668 | Dallas Temperature ID 5 | 8 | Unsigned | 0 | 0xffffffffffffffff | - | - | Dallas (1-Wire) temperature sensor ID #5. | Permanent I/O elements |
| 669 | Dallas Temperature 5 | 4 | Signed | -550 | 1150 | 0.1 | °C | Indicates temperature value scanned by dallas (1-Wire) temperature sensor #5. | Permanent I/O elements |
| 755 | OEM Remaining distance | 2 | Unsigned | 0 | 65535 | - | km | Remaining distance until fuel tank empty or battery (EV) depleted, (km). | Permanent I/O elements |
| 756 | OEM Ignition | 1 | Unsigned | 0 | 1 | - | - | Ignition status. | Permanent I/O elements |
| 757 | OEM Fuel Tank Capacity | 1 | Unsigned | 0 | 255 | - | l | Fuel tank, which is installed in vehicle, capacity, (l). | Permanent I/O elements |
| 758 | OEM Fuel Consumption | 4 | Unsigned | 0 | 4294967295 | - | 0.1l/100km | Fuel consumption of vehicle, (0.1l/100km). | Permanent I/O elements |
| 759 | OBD Fuel Type | 1 | Unsigned | 0 | 255 | - | - | Bits represent different types of fuel. | Permanent I/O elements |
| 800 | External Voltage | 4 | Unsigned | 0 | 0xFFFFFFFF | - | mV | Voltage supplied by external power source in millivolts (mV). | Permanent I/O elements |
| 841 | Digital Output 1 overcurrent | 1 | Unsigned | 0 | 1 | - | - | State of digital output 1 overcurrent. | Permanent I/O elements |
| 842 | Digital Output 2 overcurrent | 1 | Unsigned | 0 | 1 | - | - | State of digital output 2 overcurrent. | Permanent I/O elements |
| 1148 | Connectivity Quality | 4 | Unsigned | 0 | 2147483647 | - | - | Provides detailed signal quality information in LTE, eMTC (CAT-Mx) and NB-IoT modes. RSSI (byte 0): 0 - 255 in dBm (negative values) RSRP (byte 1): 0 - 255 in dBm (negative values) SINR (byte 2): 0 - 250 which translates to -20dB to +30dB (1/5th of dB) RSRQ (byte 3): 0 - 255 in dB (negative values) | Permanent I/O elements |
| 1151 | OEM Battery Health | 2 | Unsigned | 0 | 65535 | 0.1 | % | Battery State of Health, (%). | Permanent I/O elements |
| 1152 | OEM Battery Temperature | 2 | Signed | -32768 | 32767 | 0.01 | °C | BEV or BHEV battery pack temperature, (°C). | Permanent I/O elements |
| 1154 | OBD Ethanol Fuel Percent | 1 | Unsigned | 0 | 100 | - | % | Percentage of ethanol in fuel, (l). | Permanent I/O elements |
| 1280 | TPMS Left Tire Pressure | 2 | Unsigned | 0 | 65535 | 0.01 | bar | TPMS Left Tire Pressure, (bar). | Permanent I/O elements |
| 1281 | TPMS Front Right Tire Pressure | 2 | Unsigned | 0 | 65535 | 0.01 | bar | TPMS Front Right Tire Pressure, (bar). | Permanent I/O elements |
| 1282 | TPMS Rear Left Tire Pressure | 2 | Unsigned | 0 | 65535 | 0.01 | bar | TPMS Rear Left Tire Pressure, (bar). | Permanent I/O elements |
| 1283 | TPMS Rear Right Tire Pressure | 2 | Unsigned | 0 | 65535 | 0.01 | bar | TPMS Rear Right Tire Pressure, (bar). | Permanent I/O elements |
| 1284 | Placard Front Pressure | 2 | Unsigned | 0 | 65535 | 0.01 | bar | Placard front pressure, (bar). | Permanent I/O elements |
| 1285 | Placard Rear Pressure | 2 | Unsigned | 0 | 65535 | 0.01 | bar | Placard rear pressure, (bar). | Permanent I/O elements |
| 1290 | DTC | 128 | ASCII | 0 | 128 | - | - | Tire pressure monitoring system diagnostic trouble codes. | Permanent I/O elements |
| 1291 | Status Lamps | 2 | Unsigned | 0 | 65535 | - | - | Vehicle dashboard status lamps. | Permanent I/O elements |
| 1378 | OEM Battery Min Cell Voltage | 2 | Unsigned | 0 | 65535 | 0.1 | V | Battery Min Cell Voltage, (V). | Permanent I/O elements |
| 1379 | OEM Battery Max Cell Voltage | 2 | Unsigned | 0 | 65535 | 0.1 | V | Battery Max Cell Voltage, (V). | Permanent I/O elements |
| 1380 | OEM Battery Current | 2 | Unsigned | 0 | 65535 | 0.1 | A | Battery Current, (A). | Permanent I/O elements |
| 1381 | OEM Battery Voltage | 2 | Unsigned | 0 | 65535 | 0.1 | V | Battery Voltage, (V). | Permanent I/O elements |
| 1382 | OEM Battery Max Energy | 2 | Unsigned | 0 | 65535 | 0.1 | kWh | Battery Max Energy, (kWh). | Permanent I/O elements |
| 1383 | OEM Battery Measured Energy | 2 | Unsigned | 0 | 65535 | 0.1 | kWh | Battery Measured Energy, (kWh). | Permanent I/O elements |
| 1384 | OEM Battery Pack Power | 2 | Signed | -32768 | 32767 | 0.1 | kWh | Battery Pack Power, (kWh). | Permanent I/O elements |
| 1385 | OEM Battery Last Charge Energy | 2 | Unsigned | 0 | 65535 | 0.1 | kWh | Battery Last Charge Energy, (kWh). | Permanent I/O elements |
| 1386 | OEM Battery Min Temperature | 2 | Signed | -32768 | 32767 | 0.1 | °C | Battery Min Temperature, (°C). | Permanent I/O elements |
| 1387 | OEM Battery Max Temperature | 2 | Signed | -32768 | 32767 | 0.1 | °C | Battery Max Temperature, (°C). | Permanent I/O elements |
| 1388 | OEM Battery Lifetime Power Use | 4 | Unsigned | 0 | 2147483648 | 1 | kWh | Battery Lifetime Power Use, (kWh). | Permanent I/O elements |
| 1389 | OEM Battery Lifetime Charge Pw | 4 | Unsigned | 0 | 2147483648 | 1 | kWh | Battery Lifetime Charge Power, (kWh). | Permanent I/O elements |
| 1390 | OEM Fast Charge Count | 2 | Unsigned | 0 | 65535 | 0.1 | - | Fast Charge Count. | Permanent I/O elements |
| 1391 | OEM Slow Charge Count | 2 | Unsigned | 0 | 65535 | 0.1 | - | Slow Charge Count. | Permanent I/O elements |
| 1392 | OEM Charger Entry Power | 2 | Unsigned | 0 | 65535 | 0.1 | kWh | Charger Entry Power, (kWh). | Permanent I/O elements |
| 1393 | OEM Ambient temperature | 2 | Signed | -32768 | 32767 | 0.1 | °C | Ambient temperature, (°C). | Permanent I/O elements |
| 1394 | OEM Total Available Power | 2 | Unsigned | 0 | 65535 | 0.1 | kW | Total Available Power, (kW). | Permanent I/O elements |
| 1395 | OEM A/C Status | 1 | Unsigned | 0 | 255 | - | - | A/C Status. | Permanent I/O elements |
| 1433 | Dead Reckoning status | 1 | Unsigned | 0 | 3 | - | - | Dead reckoning alignment status: 0 - Unknown, 1 - Init, 3 - Stable. | Permanent I/O elements |
| 1434 | Turning alignment | 1 | Unsigned | 0 | 0 | - | - | Turning alignment progress. | Permanent I/O elements |
| 1435 | Straight alignment | 128 | ASCII | 0 | 128 | - | - | Straight alignment progress. | Permanent I/O elements |
| 1437 | Side vector delta | 1 | Unsigned | 0 | 180 | - | deg | Angle difference between calculated accelerometer calibration side vector and (0,1,0) | Permanent I/O elements |
| 1438 | Accel calibration duration | 2 | Unsigned | 0 | 65535 | - | s | Accelerometer calibration duration in seconds | Permanent I/O elements |
| 1440 | Accel calibration quality | 1 | Unsigned | 0 | 100 | - | - | Calibration quality. 0 - the worst quality, 100 - perfect quality | Permanent I/O elements |
| 1441 | VMDS movement status | 1 | Unsigned | 0 | 2 | - | - | Vehicle motion dynamic system movement status. 0 - Unknown, 1 - Static, 2 - Dynamic. | Permanent I/O elements |
| 1443 | Distance since refuel | 2 | Unsigned | 0 | 65535 | 1 | km | - | Permanent I/O elements |
| 1452 | Faulty Device Mounting | 1 | Unsigned | 0 | 1 | - | - | Device mounting status: 0 - device is mounted properly, 1 - high vibrations detected, 2 - device mounting changed, 3 - GNSS antenna angle invalid. | Permanent I/O elements |
| 1454 | DR device mounting yaw | 2 | Signed | -3600 | 3600 | 0.1 | degrees | Orientation around the Z-axis (yaw). | Permanent I/O elements |
| 1455 | DR device mounting pitch | 2 | Signed | -3600 | 3600 | 0.1 | degrees | Orientation around the Y-axis (pitch). | Permanent I/O elements |
| 1456 | DR device mounting roll | 2 | Signed | -3600 | 3600 | 0.1 | degrees | Orientation around the X-axis (roll). | Permanent I/O elements |
| 1457 | DR device position x | 2 | Signed | -32768 | 32767 | 1 | meters | Linear displacement in X axis | Permanent I/O elements |
| 1458 | DR device position y | 2 | Signed | -32768 | 32767 | 1 | meters | Linear displacement in Y axis | Permanent I/O elements |
| 1459 | DR device position Z | 2 | Signed | -32768 | 32767 | 1 | meters | Linear displacement in Z axis | Permanent I/O elements |
| 1460 | DR fusion timestamp | 4 | Unsigned | 0 | 4294967295 | 1 | - | Fusion timestamp | Permanent I/O elements |
| 1461 | DR fusion status | 1 | Unsigned | 0 | 255 | 1 | - | Fusion status | Permanent I/O elements |
| 1462 | DR accelerometer sum std | 4 | Unsigned | 0 | 4294967295 | 1 | - | Summed standard deviations of accelerometer readings | Permanent I/O elements |
| 1463 | DR gyroscope sum std | 4 | Unsigned | 0 | 4294967295 | 1 | - | Summed standard deviations of gyroscope readings | Permanent I/O elements |
| 1464 | DR accelerometer x std | 4 | Unsigned | 0 | 4294967295 | 1 | - | Standard deviation of accelerometer readings along x axis | Permanent I/O elements |
| 1465 | DR accelerometer y std | 4 | Unsigned | 0 | 4294967295 | 1 | - | Standard deviation of accelerometer readings along y axis | Permanent I/O elements |
| 1466 | DR accelerometer z std | 4 | Unsigned | 0 | 4294967295 | 1 | - | Standard deviation of accelerometer readings along z axis | Permanent I/O elements |
| 1467 | DR gyroscope x std | 4 | Unsigned | 0 | 4294967295 | 1 | - | Standard deviation of gyroscope readings along x axis | Permanent I/O elements |
| 1468 | DR gyroscope y std | 4 | Unsigned | 0 | 4294967295 | 1 | - | Standard deviation of gyroscope readings along y axis | Permanent I/O elements |
| 1469 | DR gyroscope z std | 4 | Unsigned | 0 | 4294967295 | 1 | - | Standard deviation of gyroscope readings along z axis | Permanent I/O elements |
| 1470 | DR accelerometer x | 4 | Signed | -2147483648 | 2147483647 | 1e-06 | m/s2 | Acceleration in x axis | Permanent I/O elements |
| 1471 | DR accelerometer y | 4 | Signed | -2147483648 | 2147483647 | 1e-06 | m/s2 | Acceleration in y axis | Permanent I/O elements |
| 1472 | DR accelerometer z | 4 | Signed | -2147483648 | 2147483647 | 1e-06 | m/s2 | Acceleration in z axis | Permanent I/O elements |
| 1473 | DR realigment reason | 1 | Signed | -128 | 127 | - | - | Dead reckoning realignment reason | Permanent I/O elements |
| 10001 | Digital Output 4 | 1 | Unsigned | 0 | 1 | - | - | State of digital output 4. | Permanent I/O elements |
| 10002 | Analog Input 3 | 2 | Unsigned | 0 | 65535 | 0.001 | V | Analog input 3 value in millivolts (mV). | Permanent I/O elements |
| 10003 | Analog Input 4 | 2 | Unsigned | 0 | 65535 | 0.001 | V | Analog input 4 value in millivolts (mV). | Permanent I/O elements |
| 10004 | Digital Output 3 overcurrent | 1 | Unsigned | 0 | 1 | - | - | State of digital output 3 overcurrent. | Permanent I/O elements |
| 10005 | Digital Output 4 overcurrent | 1 | Unsigned | 0 | 1 | - | - | State of digital output 4 overcurrent. | Permanent I/O elements |
| 10808 | Magnet 1 | - | - | - | - | - | - | Magnet state of BLE device #1 | Permanent I/O elements |
| 10809 | Magnet 2 | - | - | - | - | - | - | Magnet state of BLE device #2 | Permanent I/O elements |
| 10810 | Magnet 3 | - | - | - | - | - | - | Magnet state of BLE device #3 | Permanent I/O elements |
| 10811 | Magnet 4 | - | - | - | - | - | - | Magnet state of BLE device #4 | Permanent I/O elements |
| 10812 | Movement Count 1 | - | - | - | - | - | - | Movement Count of BLE device #1 | Permanent I/O elements |
| 10813 | Movement Count 2 | - | - | - | - | - | - | Movement Count of BLE device #2 | Permanent I/O elements |
| 10814 | Movement Count 3 | - | - | - | - | - | - | Movement Count of BLE device #3 | Permanent I/O elements |
| 10815 | Movement Count 4 | - | - | - | - | - | - | Movement Count of BLE device #4 | Permanent I/O elements |
| 10816 | Pitch 1 | - | - | - | - | - | - | Pitch of BLE device #1 | Permanent I/O elements |
| 10817 | Pitch 2 | - | - | - | - | - | - | Pitch of BLE device #2 | Permanent I/O elements |
| 10818 | Pitch 3 | - | - | - | - | - | - | Pitch of BLE device #3 | Permanent I/O elements |
| 10819 | Pitch 4 | - | - | - | - | - | - | Pitch of BLE device #4 | Permanent I/O elements |
| 10820 | Low Battery 1 | - | - | - | - | - | - | Low battery status for BLE device #1 | Permanent I/O elements |
| 10821 | Low Battery 2 | - | - | - | - | - | - | Low battery status for BLE device #2 | Permanent I/O elements |
| 10822 | Low Battery 3 | - | - | - | - | - | - | Low battery status for BLE device #3 | Permanent I/O elements |
| 10823 | Low Battery 4 | - | - | - | - | - | - | Low battery status for BLE device #4 | Permanent I/O elements |
| 10832 | Roll 1 | - | - | - | - | - | - | Roll of BLE device #1 | Permanent I/O elements |
| 10833 | Roll 2 | - | - | - | - | - | - | Roll of BLE device #2 | Permanent I/O elements |
| 10834 | Roll 3 | - | - | - | - | - | - | Roll of BLE device #3 | Permanent I/O elements |
| 10835 | Roll 4 | - | - | - | - | - | - | Roll of BLE device #4 | Permanent I/O elements |
| 11399 | Time to First Fix | 2 | Unsigned | 0 | 0xFFFF | - | - | Time taken in seconds until the first GNSS fix after device is reset. | Permanent I/O elements |
| 13222 | Battery Voltage 6 | 2 | Unsigned | 0 | 0xFFFF | - | - | Battery voltage for BLE device #6 | Permanent I/O elements |
| 13223 | Battery Voltage 7 | 2 | Unsigned | 0 | 0xFFFF | - | - | Battery voltage for BLE device #7 | Permanent I/O elements |
| 13224 | Battery Voltage 8 | 2 | Unsigned | 0 | 0xFFFF | - | - | Battery voltage for BLE device #8 | Permanent I/O elements |
| 13225 | Battery Voltage 9 | 2 | Unsigned | 0 | 32767 | - | - | Battery voltage for BLE device #9 | Permanent I/O elements |
| 13226 | Battery Voltage 10 | 2 | Unsigned | 0 | 32767 | - | - | Battery voltage for BLE device #10 | Permanent I/O elements |
| 13227 | Temperature 5 | 2 | Unsigned | 0 | 32767 | - | - | Temperature reported by BLE device #5 | Permanent I/O elements |
| 13228 | Temperature 6 | 2 | Unsigned | 0 | 32767 | - | - | Temperature reported by BLE device #6 | Permanent I/O elements |
| 13229 | Temperature 7 | 2 | Unsigned | 0 | 32767 | - | - | Temperature reported by BLE device #7 | Permanent I/O elements |
| 13230 | Temperature 8 | 2 | Unsigned | 0 | 32767 | - | - | Temperature reported by BLE device #8 | Permanent I/O elements |
| 13231 | Temperature 9 | 1 | Signed | -90 | 90 | - | - | Temperature reported by BLE device #9 | Permanent I/O elements |
| 13232 | Temperature 10 | 1 | Signed | -90 | 90 | - | - | Temperature reported by BLE device #10 | Permanent I/O elements |
| 13233 | RSSI 1 | 2 | Signed | -180 | 180 | - | - | Signal strength value for BLE device #1 | Permanent I/O elements |
| 13234 | RSSI 2 | 2 | Signed | -180 | 180 | - | - | Signal strength value for BLE device #2 | Permanent I/O elements |
| 13235 | RSSI 3 | 2 | Signed | -180 | 180 | - | - | Signal strength value for BLE device #3 | Permanent I/O elements |
| 13236 | RSSI 4 | 2 | Signed | -180 | 180 | - | - | Signal strength value for BLE device #4 | Permanent I/O elements |
| 13237 | RSSI 5 | 2 | Signed | -180 | 180 | - | - | Signal strength value for BLE device #5 | Permanent I/O elements |
| 13238 | RSSI 6 | 2 | Signed | -180 | 180 | - | - | Signal strength value for BLE device #6 | Permanent I/O elements |
| 13239 | RSSI 7 | 2 | Signed | -180 | 180 | - | - | Signal strength value for BLE device #7 | Permanent I/O elements |
| 13240 | RSSI 8 | 2 | Signed | -180 | 180 | - | - | Signal strength value for BLE device #8 | Permanent I/O elements |
| 13241 | RSSI 9 | - | - | - | - | - | - | Signal strength value for BLE device #9 | Permanent I/O elements |
| 13242 | RSSI 10 | - | - | - | - | - | - | Signal strength value for BLE device #10 | Permanent I/O elements |
| 13243 | MAC address 1 | 1 | Signed | -90 | 90 | - | - | MAC address for BLE device #1 | Permanent I/O elements |
| 13244 | MAC address 2 | 1 | Signed | -90 | 90 | - | - | MAC address for BLE device #2 | Permanent I/O elements |
| 13245 | MAC address 3 | 1 | Signed | -90 | 90 | - | - | MAC address for BLE device #3 | Permanent I/O elements |
| 13246 | MAC address 4 | 1 | Signed | -90 | 90 | - | - | MAC address for BLE device #4 | Permanent I/O elements |
| 13247 | MAC address 5 | 1 | Signed | -90 | 90 | - | - | MAC address for BLE device #5 | Permanent I/O elements |
| 13248 | MAC address 6 | 1 | Signed | -90 | 90 | - | - | MAC address for BLE device #6 | Permanent I/O elements |
| 13249 | MAC address 7 | 1 | Signed | -90 | 90 | - | - | MAC address for BLE device #7 | Permanent I/O elements |
| 13250 | MAC address 8 | 1 | Signed | -90 | 90 | - | - | MAC address for BLE device #8 | Permanent I/O elements |
| 13251 | MAC address 9 | 2 | Signed | -180 | 180 | - | - | MAC address for BLE device #9 | Permanent I/O elements |
| 13252 | MAC address 10 | 2 | Signed | -180 | 180 | - | - | MAC address for BLE device #10 | Permanent I/O elements |
| 13253 | Low Battery 5 | - | - | - | - | - | - | Low battery status for BLE device #5 | Permanent I/O elements |
| 13254 | Low Battery 6 | - | - | - | - | - | - | Low battery status for BLE device #6 | Permanent I/O elements |
| 13255 | Low Battery 7 | - | - | - | - | - | - | Low battery status for BLE device #7 | Permanent I/O elements |
| 13256 | Low Battery 8 | - | - | - | - | - | - | Low battery status for BLE device #8 | Permanent I/O elements |
| 13257 | Low Battery 9 | - | - | - | - | - | - | Low battery status for BLE device #9 | Permanent I/O elements |
| 13258 | Low Battery 10 | - | - | - | - | - | - | Low battery status for BLE device #10 | Permanent I/O elements |
| 13266 | Current Active Log File | - | - | - | - | - | - | Currently active file that is used for storing logs. | Permanent I/O elements |
| 13267 | Max Log File Count | - | - | - | - | - | - | Maximum amount of log files to be stored in the device. | Permanent I/O elements |
| 13325 | Name 1 | - | - | - | - | - | - | BLE device name #1 | Permanent I/O elements |
| 13326 | Name 2 | - | - | - | - | - | - | BLE device name #2 | Permanent I/O elements |
| 13327 | Name 3 | - | - | - | - | - | - | BLE device name #3 | Permanent I/O elements |
| 13328 | Name 4 | - | - | - | - | - | - | BLE device name #4 | Permanent I/O elements |
| 13329 | Name 5 | - | - | - | - | - | - | BLE device name #5 | Permanent I/O elements |
| 13330 | Name 6 | - | - | - | - | - | - | BLE device name #6 | Permanent I/O elements |
| 13331 | Name 7 | - | - | - | - | - | - | BLE device name #7 | Permanent I/O elements |
| 13332 | Name 8 | - | - | - | - | - | - | BLE device name #8 | Permanent I/O elements |
| 13333 | Name 9 | - | - | - | - | - | - | BLE device name #9 | Permanent I/O elements |
| 13334 | Name 10 | - | - | - | - | - | - | BLE device name #10 | Permanent I/O elements |
| 13335 | Humidity 6 | - | - | - | - | - | - | Humidity level reported by BLE device #6 | Permanent I/O elements |
| 13336 | Humidity 7 | - | - | - | - | - | - | Humidity level reported by BLE device #7 | Permanent I/O elements |
| 13337 | Humidity 8 | - | - | - | - | - | - | Humidity level reported by BLE device #8 | Permanent I/O elements |
| 13338 | Humidity 9 | - | - | - | - | - | - | Humidity level reported by BLE device #9 | Permanent I/O elements |
| 13339 | Humidity 10 | - | - | - | - | - | - | Humidity level reported by BLE device #10 | Permanent I/O elements |
| 13361 | Incoming Call | - | - | - | - | - | - | Indicates whether there is an active incoming call to the device. A value of 0 signifies no incoming call, while a value of 1 indicates an incoming call is in progress. | Permanent I/O elements |
| 13370 | Neighbouring Cell 1 LAC | - | - | - | - | - | - | - | Permanent I/O elements |
| 13371 | Neighbouring Cell 1 ID | - | - | - | - | - | - | - | Permanent I/O elements |
| 13372 | Neighbouring Cell 1 RSSI | - | - | - | - | - | - | - | Permanent I/O elements |
| 13373 | Neighbouring Cell 1 MNC | - | - | - | - | - | - | - | Permanent I/O elements |
| 13374 | Neighbouring Cell 1 MCC | - | - | - | - | - | - | - | Permanent I/O elements |
| 13375 | Neighbouring Cell 2 LAC | - | - | - | - | - | - | - | Permanent I/O elements |
| 13376 | Neighbouring Cell 2 ID | - | - | - | - | - | - | - | Permanent I/O elements |
| 13377 | Neighbouring Cell 2 RSSI | - | - | - | - | - | - | - | Permanent I/O elements |
| 13378 | Neighbouring Cell 2 MNC | - | - | - | - | - | - | - | Permanent I/O elements |
| 13379 | Neighbouring Cell 2 MCC | - | - | - | - | - | - | - | Permanent I/O elements |
| 13380 | Neighbouring Cell 3 LAC | - | - | - | - | - | - | - | Permanent I/O elements |
| 13381 | Neighbouring Cell 3 ID | - | - | - | - | - | - | - | Permanent I/O elements |
| 13382 | Neighbouring Cell 3 RSSI | - | - | - | - | - | - | - | Permanent I/O elements |
| 13383 | Neighbouring Cell 3 MNC | - | - | - | - | - | - | - | Permanent I/O elements |
| 13384 | Neighbouring Cell 3 MCC | - | - | - | - | - | - | - | Permanent I/O elements |
| 13385 | Neighbouring Cell 4 LAC | - | - | - | - | - | - | - | Permanent I/O elements |
| 13386 | Neighbouring Cell 4 ID | - | - | - | - | - | - | - | Permanent I/O elements |
| 13387 | Neighbouring Cell 4 RSSI | - | - | - | - | - | - | - | Permanent I/O elements |
| 13388 | Neighbouring Cell 4 MNC | - | - | - | - | - | - | - | Permanent I/O elements |
| 13389 | Neighbouring Cell 4 MCC | - | - | - | - | - | - | - | Permanent I/O elements |
| 13460 | Magnet 5 | - | - | - | - | - | - | Magnet state of BLE device #5 | Permanent I/O elements |
| 13461 | Magnet 6 | - | - | - | - | - | - | Magnet state of BLE device #6 | Permanent I/O elements |
| 13462 | Magnet 7 | - | - | - | - | - | - | Magnet state of BLE device #7 | Permanent I/O elements |
| 13463 | Magnet 8 | - | - | - | - | - | - | Magnet state of BLE device #8 | Permanent I/O elements |
| 13464 | Magnet 9 | - | - | - | - | - | - | Magnet state of BLE device #9 | Permanent I/O elements |
| 13465 | Magnet 10 | - | - | - | - | - | - | Magnet state of BLE device #10 | Permanent I/O elements |
| 13468 | Movement Count 5 | - | - | - | - | - | - | Movement Count of BLE device #5 | Permanent I/O elements |
| 13469 | Movement Count 6 | - | - | - | - | - | - | Movement Count of BLE device #6 | Permanent I/O elements |
| 13470 | Movement Count 7 | - | - | - | - | - | - | Movement Count of BLE device #7 | Permanent I/O elements |
| 13471 | Movement Count 8 | - | - | - | - | - | - | Movement Count of BLE device #8 | Permanent I/O elements |
| 13472 | Movement Count 9 | - | - | - | - | - | - | Movement Count of BLE device #9 | Permanent I/O elements |
| 13473 | Movement Count 10 | - | - | - | - | - | - | Movement Count of BLE device #10 | Permanent I/O elements |
| 13474 | Pitch 5 | - | - | - | - | - | - | Pitch of BLE device #5 | Permanent I/O elements |
| 13475 | Pitch 6 | - | - | - | - | - | - | Pitch of BLE device #6 | Permanent I/O elements |
| 13476 | Pitch 7 | - | - | - | - | - | - | Pitch of BLE device #7 | Permanent I/O elements |
| 13477 | Pitch 8 | - | - | - | - | - | - | Pitch of BLE device #8 | Permanent I/O elements |
| 13478 | Pitch 9 | - | - | - | - | - | - | Pitch of BLE device #9 | Permanent I/O elements |
| 13479 | Pitch 10 | - | - | - | - | - | - | Pitch of BLE device #10 | Permanent I/O elements |
| 13480 | Roll 5 | - | - | - | - | - | - | Roll of BLE device #5 | Permanent I/O elements |
| 13481 | Roll 6 | - | - | - | - | - | - | Roll of BLE device #6 | Permanent I/O elements |
| 13482 | Roll 7 | - | - | - | - | - | - | Roll of BLE device #7 | Permanent I/O elements |
| 13483 | Roll 8 | - | - | - | - | - | - | Roll of BLE device #8 | Permanent I/O elements |
| 13484 | Roll 9 | - | - | - | - | - | - | Roll of BLE device #9 | Permanent I/O elements |
| 13485 | Roll 10 | - | - | - | - | - | - | Roll of BLE device #10 | Permanent I/O elements |
Eventual I/O elements
| Property ID in AVL packet | Property Name | Bytes | Type | Min Value | Max Value | Multiplier | Units | Description | Parameter Group |
|---|---|---|---|---|---|---|---|---|---|
| 156 | In-zone event | 1 | Unsigned | 0 | 3 | - | - | Possible values: 0 - Exit event; 1 - Enter event. | Eventual I/O elements |
| 157 | Speeding event | 1 | Unsigned | 0 | 3 | - | - | Possible values: 0 - Speeding stop event; 1 - Speeding start event. | Eventual I/O elements |
| 175 | Auto Geofence | 1 | Unsigned | 0 | 2 | - | - | 0 – target left zone 1 – target entered zone 2 – Auto Geofence disabled by configured source | Eventual I/O elements |
| 199 | Trip Odometer | 4 | Unsigned | 0 | 2147483647 | - | m | Trip distance value calculated by GNSS in meters (m). | Eventual I/O elements |
| 236 | Alarm Event | 1 | Unsigned | 0 | 1 | - | - | - | Eventual I/O elements |
| 246 | Towing | 1 | Unsigned | 0 | 1 | - | - | 0 – steady, 1 – towing | Eventual I/O elements |
| 247 | Crash detection | 1 | Unsigned | 1 | 14 | - | - | Indicates when the crash happens and what kind of crash trace is generated. | Eventual I/O elements |
| 248 | Immobilizer | 1 | Unsigned | 0 | 2 | - | - | The feature prevents unauthorized drivers from operating the vehicle by blocking the starter with a relay. Manage authorized drivers allowed to use a vehicle with a list and bring extra security to protect a vehicle from theft. | Eventual I/O elements |
| 249 | Jamming | 1 | Unsigned | 0 | 1 | - | - | 1 – jamming start 0 – jamming stop | Eventual I/O elements |
| 250 | Trip | 1 | Unsigned | 0 | 1 | - | - | 1 – trip start, 0 – trip stop | Eventual I/O elements |
| 252 | Unplug | 1 | Unsigned | 0 | 1 | - | - | 0 – battery present 1 – battery unpluged | Eventual I/O elements |
| 255 | Over Speeding | 1 | Unsigned | 0 | 255 | - | km/h | At over speeding start km/h, at over speeding end km/h | Eventual I/O elements |
| 257 | Crash trace data | 1200 | HEX | 0 | 1200 | - | - | Generated when crash is detected and crash trace is enabled. Contains IMU accelerometer axis data in hex format: 0xXXXXYYYYZZZZ | Eventual I/O elements |
| 358 | Custom Scenario 1 | 4 | Unsigned | 0 | 2147483647 | - | sec | - | Eventual I/O elements |
| 359 | Custom Scenario 2 | 4 | Unsigned | 0 | 2147483647 | - | sec | - | Eventual I/O elements |
| 360 | Custom Scenario 3 | 2 | Unsigned | 0 | 32767 | - | sec | - | Eventual I/O elements |
| 1429 | Average Crash vector | 8 | Unsigned | 0 | 0xffffffffffffffff | - | mg | Stores the average vector calculated during the crash: 2B - X axis, 2B - Y axis, 2B - Z axis, 2B - magnitude in mG | Eventual I/O elements |
| 1430 | Crash direction | 1 | Unsigned | 0 | 0xff | - | - | Stores the indication if the accelerometer is calibrated. Also indicated the direction of the crash. 1 bit (highest bit) indicates calibration status, rest of the bits indicates crash direction | Eventual I/O elements |
| 1431 | Crash duration | 2 | Unsigned | 0 | 0xffff | - | - | Duration of the crash event | Eventual I/O elements |
| 1432 | Crash max vector | 8 | Unsigned | 0 | 0xffffffffffffffff | - | mg | Stores the max vector calculated during the crash: 2B - X axis, 2B - Y axis, 2B - Z axis, 2B - magnitude in mG | Eventual I/O elements |
| 1442 | VMDS alarm status | 2 | Unsigned | 0 | 1023 | - | - | Vehicle motion dynamic system alarm status. | Eventual I/O elements |
Manual CAN I/O elements
{{#if: | {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if: {{FTX Pin Support List|model={{{model}}}|pin=MCAN} | } {{#if:
| Property ID in AVL packet | Property Name | Bytes | Type | Min Value | Max Value | Multiplier | Units | Description | Parameter Group |
|---|---|---|---|---|---|---|---|---|---|
| 10216 | Manual CAN0 | 2 | Unsigned | 0 | 65535 | - | sec | - | Manual CAN I/O elements |
| 10217 | Manual CAN1 | 1 | Unsigned | 0 | 100 | - | % | - | Manual CAN I/O elements |
| 10218 | Manual CAN2 | 1 | Unsigned | 0 | 100 | - | % | - | Manual CAN I/O elements |
| 10219 | Manual CAN3 | 1 | Unsigned | 0 | 100 | - | % | - | Manual CAN I/O elements |
| 10220 | Manual CAN4 | 1 | Unsigned | 0 | 100 | - | % | - | Manual CAN I/O elements |
| 10221 | Manual CAN5 | 1 | Unsigned | 0 | 100 | - | % | - | Manual CAN I/O elements |
| 10222 | Manual CAN6 | 2 | Signed | -400 | 1250 | 0.1 | °C | - | Manual CAN I/O elements |
| 10223 | Manual CAN7 | 2 | Signed | -400 | 1250 | 0.1 | °C | - | Manual CAN I/O elements |
| 10224 | Manual CAN8 | 2 | Signed | -400 | 1250 | 0.1 | °C | - | Manual CAN I/O elements |
| 10225 | Manual CAN9 | 2 | Signed | -400 | 1250 | 0.1 | °C | - | Manual CAN I/O elements |
| 10226 | Manual CAN10 | 2 | Signed | -400 | 1250 | 0.1 | °C | - | Manual CAN I/O elements |
| 10227 | Manual CAN11 | 2 | Signed | -400 | 1250 | 0.1 | °C | - | Manual CAN I/O elements |
| 10228 | Manual CAN12 | 6 | HEX | 0 | 6 | - | - | - | Manual CAN I/O elements |
| 10229 | Manual CAN13 | 6 | HEX | 0 | 6 | - | - | - | Manual CAN I/O elements |
| 10230 | Manual CAN14 | 6 | HEX | 0 | 6 | - | - | - | Manual CAN I/O elements |
| 10231 | Manual CAN15 | 6 | HEX | 0 | 6 | - | - | - | Manual CAN I/O elements |
| 10232 | Manual CAN16 | 6 | HEX | 0 | 6 | - | - | - | Manual CAN I/O elements |
| 10233 | Manual CAN17 | 6 | HEX | 0 | 6 | - | - | - | Manual CAN I/O elements |
| 10234 | Manual CAN18 | 6 | HEX | 0 | 6 | - | - | - | Manual CAN I/O elements |
| 10235 | Manual CAN19 | 6 | HEX | 0 | 6 | - | - | - | Manual CAN I/O elements |
| 10298 | Manual CAN20 | 6 | HEX | 0 | 6 | - | - | - | Manual CAN I/O elements |
| 10299 | Manual CAN21 | 6 | HEX | 0 | 6 | - | - | - | Manual CAN I/O elements |
| 10300 | Manual CAN22 | 1 | Signed | -127 | 0 | - | dBm | - | Manual CAN I/O elements |
| 10301 | Manual CAN23 | 1 | Signed | -127 | 0 | - | dBm | - | Manual CAN I/O elements |
| 10302 | Manual CAN24 | 1 | Signed | -127 | 0 | - | dBm | - | Manual CAN I/O elements |
| 10303 | Manual CAN25 | 1 | Signed | -127 | 0 | - | dBm | - | Manual CAN I/O elements |
| 10304 | Manual CAN26 | 1 | Signed | -127 | 0 | - | dBm | - | Manual CAN I/O elements |
| 10305 | Manual CAN27 | 1 | Signed | -127 | 0 | - | dBm | - | Manual CAN I/O elements |
| 10306 | Manual CAN28 | 1 | Signed | -127 | 0 | - | dBm | - | Manual CAN I/O elements |
| 10307 | Manual CAN29 | 1 | Signed | -127 | 0 | - | dBm | - | Manual CAN I/O elements |
| 10308 | Manual CAN30 | 1 | Signed | -127 | 0 | - | dBm | - | Manual CAN I/O elements |
| 10309 | Manual CAN31 | 1 | Signed | -127 | 0 | - | dBm | - | Manual CAN I/O elements |
| 10310 | Manual CAN32 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10311 | Manual CAN33 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10312 | Manual CAN34 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10313 | Manual CAN35 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10314 | Manual CAN36 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10315 | Manual CAN37 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10316 | Manual CAN38 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10317 | Manual CAN39 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10318 | Manual CAN40 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10319 | Manual CAN41 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10320 | Manual CAN42 | 2 | Unsigned | 0 | 350 | - | km/h | - | Manual CAN I/O elements |
| 10321 | Manual CAN43 | 1 | Unsigned | 0 | 255 | - | - | - | Manual CAN I/O elements |
| 10322 | Manual CAN44 | 12 | ASCII | 0 | 12 | - | - | - | Manual CAN I/O elements |
| 10323 | Manual CAN45 | 12 | ASCII | 0 | 12 | - | - | - | Manual CAN I/O elements |
| 10324 | Manual CAN46 | 12 | ASCII | 0 | 12 | - | - | - | Manual CAN I/O elements |
| 10325 | Manual CAN47 | 12 | ASCII | 0 | 12 | - | - | - | Manual CAN I/O elements |
| 10326 | Manual CAN48 | 12 | ASCII | 0 | 12 | - | - | - | Manual CAN I/O elements |
| 10327 | Manual CAN49 | 12 | ASCII | 0 | 12 | - | - | - | Manual CAN I/O elements |
| 10328 | Manual CAN50 | 12 | ASCII | 0 | 12 | - | - | - | Manual CAN I/O elements |
| 10329 | Manual CAN51 | 12 | ASCII | 0 | 12 | - | - | - | Manual CAN I/O elements |
| 10330 | Manual CAN52 | 12 | ASCII | 0 | 12 | - | - | - | Manual CAN I/O elements |
| 10331 | Manual CAN53 | 12 | ASCII | 0 | 12 | - | - | - | Manual CAN I/O elements |
| 10332 | Manual CAN54 | 2 | Unsigned | 0 | 1000 | 0.1 | %RH | - | Manual CAN I/O elements |
| 10333 | Manual CAN55 | 2 | Unsigned | 0 | 1000 | 0.1 | %RH | - | Manual CAN I/O elements |
| 10334 | Manual CAN56 | 2 | Unsigned | 0 | 1000 | 0.1 | %RH | - | Manual CAN I/O elements |
| 10335 | Manual CAN57 | 2 | Unsigned | 0 | 1000 | 0.1 | %RH | - | Manual CAN I/O elements |
| 10336 | Manual CAN58 | 2 | Unsigned | 0 | 1000 | 0.1 | %RH | - | Manual CAN I/O elements |
| 10337 | Manual CAN59 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10338 | Manual CAN60 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10339 | Manual CAN61 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10340 | Manual CAN62 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10341 | Manual CAN63 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10342 | Manual CAN64 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10343 | Manual CAN65 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10344 | Manual CAN66 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10345 | Manual CAN67 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
| 10346 | Manual CAN68 | 1 | Unsigned | 0 | 1 | - | - | - | Manual CAN I/O elements |
[[Category:{{{model}}}]]