EYE BEACON MESH/MTSID1

Introduction

Wireless solutions open up new horizons for your business and help to keep an eye on your assets. Discover our brand-new and certified Bluetooth® Low Energy ID beacon model from Teltonika with robust waterproof casing and a long-lifetime battery. The model designed for a low-cost fast and easy configuration and integration to save precious time, resources, and ensure accountability.

About MTSID1

Perfect for traceability use cases, delivery tracking, monitoring of various movable objects in logistics (trailers, containers), agriculture (tractor attachments), and constructions (tools and inventory). Also, it suitable for indoor tracking solutions for items tracking in warehouses, hospitals, transport hubs and other types of industrial areas. EYE beacon supports iBeacon and Eddystone protocols. The device is fully compatible with the Teltonika firmware platform which provides extended functionality. Configure, scan, and update anytime anywhere with a dedicated Teltonika mobile app.

Product Specification

Features

Battery and power
Model	CR2450
Type	Lithium, Manganese Dioxide (Li/MnO2)
Total Capacity	600 mAh
Replaceable	No
Battery life (5 min)	2 years*
Battery life (10 min), default	3.5 years*
Battery life (30 min)	8 years*

*At room temperature 22 degrees

Dimensions and weight
Dimensions	56,6 mm x 38 mm x 13 mm
Weight	19 g

Electronics
Microcontroller	Silicon Labs EFR32BG22C224F512GM32-C

Connectivity
Wirepas	Wirepas Mesh v5.4
Available transmission power levels	Up to 6 dBm

Casing
Protection	IP67
Mounting	Two mounting points on each side
Marking	Available branding customisation upon request

Environmental Requirements
Humidity (non-condensing)	From 0% to 100%
Operational temperature	-20 °C / +60 °C (-4 °F / +140 °F)

Environmental Requirements
Operational temperature	-20 °C / +60 °C (-4 °F / +140 °F)

Dimensions

Value-adding Features

Hibernate mode

Hibernated mode means that the EYE device is OFF when shipping from the factory, preserving battery life. PLEASE NOTE that EYE devices are available in two modes: factory-activated (ON) or Hibernated (OFF). You may order the device version which better suits your needs. Order codes are described on eye page

Value of hibernate mode

Hibernated versions of EYE devices simplify stock management for our partners while maximizing battery life.
1. Accelerated delivery times:

By stocking up on hibernated EYE devices, you ensure readiness to deploy EYE devices with full battery capacity at any moment. This proactive approach provides fastest possible service, increases your reputation for efficiency and positions you as an industry frontrunner, enhancing your competitive edge.

2. Mitigated project risks:

In scenarios where projects encounter unforeseen challenges, our hibernated EYE devices offer a buffer. Hibernate feature allows to safeguard your investments and potential revenue streams. This means that even if projects encounter delays or complications, you can still deploy EYE devices with full battery capacity, ensuring optimal performance when the time is right.

How to activate hibernated eye device?

Attach any magnet to sleeping device and wait for LED to blink.
NOTE: ANY MAGNET CAN BE USED

Now device is active.

How to send the device to hibernate mode?

If you want to put the EYE device back to hibernate mode after accidental activation or simply pause its use, you may do that following steps below:
Step 1. While connected and in overview tap "Send device to sleep":
Step 2. Confirm your selection:
Step 3. Wait for EYE App to disconnect:

Can All devices hibernate?

1. All EYE Sensors with firmware version starting from 1.2.9.R.8 can hibernate.

2. Only new EYE Beacons bought with order codes that have hardware modification can hibernate standard codes are available in eye page, for special order codes consult your sales manager.

Mounting recomendations

EYE Beacon Protocol overview

Protocol description

At the highest-level Bluetooth® LE advertising packet consists of Advertising Indication and Scan Response. Both packets can be maximum of 31 bytes in size. Advertising Indication packet is always broadcasted when Scan Response is broadcasted only if Observer device requests it by using Active Scan.

BTSMP1 uses Advertising Indication to send beacon data which can be configured to select between iBeacon and Eddystone protocols or to be disabled at all. In that case, data which is shown as Scan Response in protocol overview will be sent as Advertising Indication without Scan Response following it.

Scan Response is used to send device name and manufacturer specific data. Manufacturer specific data includes Teltonika Company ID (0x089A) and protocol version (0x01). It is followed by Flag Encoded Data (Table 1).

Safety information

This message contains information on how to operate MTSID1 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!

1. To avoid mechanical damage, it is advised to transport the device in an impact-proof package.

2. In case of malfunction contact your Teltonika account manager or write to the technical support team over the Partner Portal/Helpdesk.

Certification & Approvals

Certificates	Links	Valid for Model
FCC (USA)	Yes	All
CE/RED (EU)	Yes	All
RoHS (EU)	Yes	All
REACH (EU)	Yes	All
IP rating	Yes	All

Memberships

Name	Links
WEEE	Yes
Battery WEEE	Yes

Nomenclature & Classification codes

Name	Links
EAN UpdateDU	Yes
HS	Yes
ECCN	Yes

External Links

Product Page

https://teltonika-gps.com/eye/ UpdateDU

Product Change Notifications

The latest Product Change Notifications can be found: Product Change Notifications UpdateDU

Software Errata

Firmware Errata: BTS firmware errata UpdateDU

Promotional Material

Product Promotional Material Page UpdateDU

Partner Providers Supporting Software

• TBA

Frequently asked questions (FAQ)

• TBA

Documents

• TBA

Additional information

For EOL policy please refer to link here.