FMB640 SMS/GPRS command list
All commands are case sensitive. When user tries to send SMS/GPRS message to FMB640 that operates in Deep Sleep mode, it cannot arrive to FMB640 device because the GSM/GPRS module is disabled most of the time. FMB640 will receive the SMS/GPRS message when it exits Deep Sleep mode.
If FMB640 is in GPS Sleep or Online Deep Sleep mode, sent SMS/GPRS message will arrive to the device.
Common commands
| Command | Description | Response |
|---|---|---|
| getinfo | Device runtime system information. | Yes |
| getver | Returns code version, device IMEI, modem app version, RTC time, Init time, Uptime and BT MAC address. | Yes |
| getstatus | Modem Status information. | Yes |
| getgps | Current GPS data, date and time. | Yes |
| getio | Readout analog input,digital input and output. | Yes |
| ggps | Returns location information with Google maps link. | Yes |
| readio # | Returns IO status, # AVL ID. | Yes |
| cpureset | Resets device. | No |
| getparam # | Returns selected parameter value, # param ID. | Yes |
| setparam #:# | Sets selected parameter value. 1.# - first ID value. |
Yes |
| setparam #:#;#:#;… | ||
| flush #,#,#,#,#,#,# | Redirects device to other server. 1.# - IMEI. |
Yes |
| countrecs | Returns records number. | Yes |
| deleterecords | Delete all records from SD card. | Yes |
| setdigout ## Y1 Y2 | Set digital output. 1.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT1. 2.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT2. Y1 – timeout value for DOUT1 if needed (in seconds). Y2 – timeout value for DOUT2 if needed (in seconds). |
Yes |
| wdlog | Returns all information about 'watch dogs' restarts. | Yes |
| defaultcfg | Load default configuration. | Yes |
| setkey # # | Add new or change current configuration keyword. If device is locked, keyword cannot be changed. 1.# - old keyword (if adding new keyword space). |
Yes |
| delkey # | Remove existing keyword (If device is locked, keyword cannot be changed). 1.# - old keyword. |
Yes |
| bbread # | Return black box information (HEX value of event ID and HEX value of custom data field (optional)). 1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS. |
Yes |
| bbinfo # | Return same information as bbread command but additional all events timestamp is written in HEX. 1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS. |
Yes |
| sdformat | Format SD card. | Yes |
| Command | Description | Response |
|---|---|---|
| fc_reset | Resets fuel consumption parameters. | Yes |
| towingreact | Towing reactivation. | Yes |
| auto_calibrate:set | Calibrate position if car accelerate straight to > 30 km/h for 5 sec. | Yes |
| auto_calibrate:get | Returns the state of calibration. | Yes |
| odoset:# | Set total odometer value. # - new odometer value in km. |
Yes |
| odoget | Display current odometer value. | Yes |
| Command | Description | Response |
|---|---|---|
| btgetlist # | Returns requested Bluetooth list. # - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected). |
Yes |
| btscan | Starts Bluetooth scan. | Yes |
| btvisible # | Sets Bluetooth to visible with TMO. # - visibility TMO (from 1 to 255 seconds). |
Yes |
| btrelease # | Disconnects from current device and pauses auto connect functionality for TMO. # - none or TMO (from 1 to 255 seconds). |
Yes |
| btunpair # | Unpair Bluetooth device. # - all, BT address (all – unpair all devices, BT address – unpair only specified MAC address). |
Yes |
| Command | Description | Response |
|---|---|---|
| lvcansetprog # | Set program number to LV-CAN200/ ALL-CAN300 that is connected to FMB1YX. # three digit number that identity vehicle. |
Yes |
| lvcansimpletacho # | Add or remove simpletacho start byte. # - 0 or 1 (0 – don’t add start byte, 1 – add start byte). |
No |
| lvcangetprog | Get program number from LV-CAN200/ ALL-CAN300 that is connected to FMB1YX. | Yes |
| lvcangetinfo | Get information about connected LV-CAN200/ALL-CAN300. | Yes |
| lvcanclear # | Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values. # - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted)).. |
Yes |
| allcanmode | Turn on ALL-CAN300 mode. | Yes |
| lvcanmode | Turn on LV-CAN200 mode. | Yes |
| lvcanfaultcodes | Read DTC fault codes. | Yes |