Template:FMA SMS/GPRS command list
From Wiki Knowledge Base | Teltonika GPS
Revision as of 10:46, 22 August 2018 by Marek.rakalovic (talk | contribs)
Read chapter 5.10 to know how to construct a proper SMS message and send it to FMA1YX device. All commands are case sensitive. While FMA1YX operates in Deep Sleep mode and user tries to send SMS message it cannot arrive to FMA1YX device, because GSM/GPRS module is disabled most of the time (wake up depends on Send Period parameter). FMA1YX will receive the SMS when it wakes up (exits deep sleep mode).
SMS command list
| Command | Description | Response |
|---|---|---|
| getinfo | Device runtime system information. | Yes |
| getver | Returns code version, device IMEI, modem app version, RTC time, Init time, Uptime and BT MAC address. | Yes |
| getstatus | Modem Status information. | Yes |
| getgps | Current GPS data, date and time. | Yes |
| getio | Readout analog input,digital input and output. | Yes |
| ggps | Returns location information with Google maps link. | Yes |
| readio # | Returns IO status, # AVL ID. | Yes |
| cpureset | Resets device. | No |
| getweektime | Current device time, Day of Week and amount of minutes passed since start of week | Yes |
| tuscias | SMS command iitiates saving and sending of high priority record | No |
| tuscias | Reponse is sent to SMS/GPRS sender and to number which is provided. | Yes |
| tuscias | Responds with information about hardware and firmware versions and storage space | Yes |
| getparam # | Returns selected parameter value, # param ID. | Yes |
| setparam #:# | Sets selected parameter value. 1.# - ID value. |
Yes |
| flush #,#,#,#,#,#,# | Initiates all data sending to specified target server. 1.# - IMEI. |
Yes |
| countrecs | Returns records number. | Yes |
| deleterecords | Delete all records from SD card. | Yes |
| setdigout ## Y1 Y2 | Set digital output. 1.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT1. 2.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT2. Y1 – timeout value for DOUT1 if needed (in seconds). Y2 – timeout value for DOUT2 if needed (in seconds). |
|
| battery | Returns battery state info. | Yes |
| wdlog | Returns all information about 'watch dogs' restarts. | Yes |
| defaultcfg | Load default configuration. | Yes |
| setkey # # | Add new or change current configuration keyword. If device is locked, keyword cannot be changed. 1.# - old keyword (if adding new keyword space). |
Yes |
| delkey # | Remove existing keyword (If device is locked, keyword cannot be changed). 1.# - old keyword. |
Yes |
| bbread # | Return black box information (HEX value of event ID and HEX value of custom data field (optional)). 1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS. |
Yes |
| bbinfo # | Return same information as bbread command but additional all events timestamp is written in HEX. 1.# - returns entered number of latest events. When # is omitted the latest events are packed to single SMS. |
Yes |
| sdformat | Format SD card. | Yes |
| Command | Description | Response |
|---|---|---|
| fc_reset | Resets fuel consumption parameters. | Yes |
| towingreact | Towing reactivation. | Yes |
| auto_calibrate:set | Calibrate position if car accelerate straight to > 30 km/h for 5 sec. | Yes |
| auto_calibrate:get | Returns the state of calibration. | Yes |
| odoset:# | Set total odometer value. # - new odometer value in km. |
Yes |
| odoget | Display current odometer value. | Yes |
| on_demand_trackingX | X=0 – Stops Tracking on Demand functionality. X=1 – Starts Tracking on Demand functionality. X=2 – Generates one high priority record and inititates data sending to server. |
Yes |
| Command | Description | Response |
|---|---|---|
| btgetlist # | Returns requested Bluetooth list. # - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected). |
Yes |
| btscan | Starts Bluetooth scan. | Yes |
| btvisible # | Sets Bluetooth to visible with TMO. # - visibility TMO (from 1 to 255 seconds). |
Yes |
| btrelease # | Disconnects from current device and pauses auto connect functionality for TMO. # - none or TMO (from 1 to 255 seconds). |
Yes |
| btunpair # | Unpair Bluetooth device. # - all, BT address (all – unpair all devices, BT address – unpair only specified MAC address). |
Yes |
| Command | Description | Response |
|---|---|---|
| obdinfo | If connected with Blue-tooth OBD dongle displays all available information from OBD. | Yes |
| faultcodes | If connected with Blue-tooth OBD dongle display all visible fault codes. | Yes |
| cleardtc | Clears all vehicle stored fault codes. | No |
| getvin | Get vehicle VIN code, if OBD dongle is connected. | Yes |
| Command | Description | Response |
|---|---|---|
| lvcansetprog # | Set program number to LV-CAN200/ ALL-CAN300 that is connected to FMB1YX. # three digit number that identity vehicle. |
Yes |
| lvcansimpletacho # | Add or remove simpletacho start byte. # - 0 or 1 (0 – don’t add start byte, 1 – add start byte). |
No |
| lvcangetprog | Get program number from LV-CAN200/ ALL-CAN300 that is connected to FMB1YX. | Yes |
| lvcangetinfo | Get information about connected LV-CAN200/ALL-CAN300. | Yes |
| lvcanclear # | Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values. # - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted)).. |
Yes |
| allcanmode | Turn on ALL-CAN300 mode. | Yes |
| lvcanmode | Turn on LV-CAN200 mode. | Yes |
| lvcanfaultcodes | Read DTC fault codes. | Yes |
