Template:FMA SMS/GPRS command list

From Wiki Knowledge Base | Teltonika GPS


Read chapter 5.10 to know how to construct a proper SMS message and send it to FMA1YX device. All commands are case sensitive. While FMA1YX operates in Deep Sleep mode and user tries to send SMS message it cannot arrive to FMA1YX device, because GSM/GPRS module is disabled most of the time (wake up depends on Send Period parameter). FMA1YX will receive the SMS when it wakes up (exits deep sleep mode).


SMS command list

Command Description Response
getstatus Modem Status information. Yes
getweektime Current device time, Day of Week and amount of minutes passed since start of week Yes
getops List of currently available GSM operator Yes
getcfgtime Date and Time of last successful configuration Yes
ggps Returns location information with Google maps link. Yes
getgps Current GPS data, date and time. Yes
cpureset Resets device. No
resetprof Reset all FLASH1 profile configuration to default profile No
getver Device / Modem / Code version information. Yes
getinfo Device runtime system information. Yes
deleterecords Delete all records saved on FLASH Yes
getio Readout analog input,digital input and output. Yes
readio # Returns IO status, # AVL ID. Yes
setdigout ## Y1 Y2 Set digital output.

1.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT1.
2.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT2.
Y1 – timeout value for DOUT1 if needed (in seconds).
Y2 – timeout value for DOUT2 if needed (in seconds).

Yes
setdigout X Z Y set selected digital output

X – number of Digital output (1 – digital output 1; 2 – digital output 2).
Z – activate(1)/deactivate(0).
Y – activation/deactivation timeout.

Yes
getparam # Returns selected parameter value, # param ID. Yes
getparam 1271 X X values can be 1,2,3. Yes
setparam #:# Sets selected parameter value.

1.# - ID value.
2.# - New first Parameter Value.

Yes
flush #,#,#,#,#,#,# Initiates all data sending to specified target server.

1.# - IMEI.
2.# - APN.
3.# - LOGIN.
4.# - PASS.
5.# - IP.
6.# - PORT.
7.# - MODE (0-TCP/1-UDP).

No
readops # 1 – send first 20 operator codes

2 – send from 21st to 40th operator codes.
3 – send all other operator codes.

No
sn # Static navigation, 1 – enable, 0 – disable Yes
banlist # Banned operators information. Yes
crashlog # Device last information before unexpected reset. Yes
delete_all_sms Deletes all SMS No
lvcangetprog CAN Program Number request by SMS Yes
lvcansetprog # Set LVCAN program number. Yes
lvcangetinfo Get LV-CAN info by SMS. Yes
getcontsens Get IDs of connected temperature sensors. Yes
faultcodes Read DTC Yes
setkey # # Add new or change current configuration keyword.

1.# - old keyword (if adding new keyword space).
2.# - new keyword.

Yes
delkey # Delete configuration keyword. Yes
dtcinfo # DTC information. Yes

Commands related to features

Command Description Response
fc_reset Resets fuel consumption parameters. Yes
towingreact Towing reactivation. Yes
auto_calibrate:set Calibrate position if car accelerate straight to > 30 km/h for 5 sec. Yes
auto_calibrate:get Returns the state of calibration. Yes
odoset:# Set total odometer value.
# - new odometer value in km.
Yes
odoget Display current odometer value. Yes
on_demand_trackingX X=0 – Stops Tracking on Demand functionality.
X=1 – Starts Tracking on Demand functionality.
X=2 – Generates one high priority record and inititates data sending to server.
Yes

Commands related to Bluetooth

Command Description Response
btgetlist # Returns requested Bluetooth list.
# - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected).
Yes
btscan Starts Bluetooth scan. Yes
btvisible # Sets Bluetooth to visible with TMO.
# - visibility TMO (from 1 to 255 seconds).
Yes
btrelease # Disconnects from current device and pauses auto connect functionality for TMO.
# - none or TMO (from 1 to 255 seconds).
Yes
btunpair # Unpair Bluetooth device.
# - all, BT address (all – unpair all devices, BT address – unpair only specified MAC address).
Yes

Commands related to OBD

Command Description Response
obdinfo If connected with Blue-tooth OBD dongle displays all available information from OBD. Yes
faultcodes If connected with Blue-tooth OBD dongle display all visible fault codes. Yes
cleardtc Clears all vehicle stored fault codes. No
getvin Get vehicle VIN code, if OBD dongle is connected. Yes

Commands related to LV-CAN200/ALL-CAN300

Command Description Response
lvcansetprog # Set program number to LV-CAN200/ ALL-CAN300 that is connected to FMB1YX.
# three digit number that identity vehicle.
Yes
lvcansimpletacho # Add or remove simpletacho start byte.
# - 0 or 1 (0 – don’t add start byte, 1 – add start byte).
No
lvcangetprog Get program number from LV-CAN200/ ALL-CAN300 that is connected to FMB1YX. Yes
lvcangetinfo Get information about connected LV-CAN200/ALL-CAN300. Yes
lvcanclear # Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values.
# - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted))..
Yes
allcanmode Turn on ALL-CAN300 mode. Yes
lvcanmode Turn on LV-CAN200 mode. Yes
lvcanfaultcodes Read DTC fault codes. Yes