Template:FMB2 First start card
From Wiki Knowledge Base | Teltonika GPS
FMB20X Small and professional waterproof tracker with high gain internal GNSS/GSM antennas, Bluetooth and high capacity internal Ni-MH battery
How to insert Micro-SIM card
- Unscrew 6 screws counter-clockwise that are located on the bottom of the device.
- Remove the cover.
- Insert Micro-SIM card as shown with PIN request disabled or read Security info how to enter it later in Configurator. Make sure that Micro-SIM card cut-off corner is pointing forward to slot.
- Connect battery as shown to device.
- After configuration, attach device cover and put the screws back in.
- Device is ready to be connected.
 |
Micro-SIM card insertion/removal must be performed when device is powered off – external voltage and battery are disconnected. Otherwise Micro-SIM card might be damaged or device will not detect it. |
Cable colors
| PIN NUMBER | PIN NAME | DESCRIPTION |  |
|---|---|---|---|
| Red | VCC (6-30)V DC (+) | Power supply (+6...30 V DC). | |
| Black | GND (-) | Ground. | |
| Yellow | DIN 1 | Digital input, channel 1. | |
| White/Green | DIN 2 | Digital input, channel 2. | |
| White | DIN 3 | Digital input, channel 3. | |
| Grey | AIN 1 | Analog input, channel 1. Input range: 0-30 V DC. | |
| White/Orange | DOUT 1 | Digital output, channel 1. Open collector output. Max. 3,3 A DC. | |
| Violet | DOUT 2 | Digital output, channel 2. Open collector output. Max. 3,3 A DC. | |
| Green | 1WIRE DATA | Data channel for 1–Wire devices. | |
| Blue | 1WIRE POWER | +3,8 V output for 1–Wire devices. |
