Sending SMS to FMB devices with 1nce platform
From Wiki Knowledge Base | Teltonika GPS
Revision as of 08:31, 6 February 2020 by Sakalauskas.paulius (talk | contribs)
Main Page > Frequently Asked Questions - FAQ > Sending SMS to FMB devices with 1nce platform
If you are using 1nce IoT SIM Cards with FMB devices. It is possible to send SMS commands to devices from the 1nce Platform.
This can be done by logging into their platform from the website https://1nce.com/en/
- By going to the tab "My SIMs" you will see the list of 1nce SIM cards that are in your account. (It is possible to filter your available SIM cards by IMSI/ICCID/MSISDN/IMEI/IP ADDRESS)
- To send SMS commands to the device. Select the SIM card to which the SMS command has to be sent. You will be forwarded to the "SMS" tab.
Enter a Source Address which has to be a valid value. (Recommended values from 1 to 65535).
In the "Payload" field enter the desired SMS command.
In the example "setdigout 1" command is sent.
- SMS command in payload has to be entered:
If you have set SMS login and password: login pass getinfo
If SMS login and password are not set leave two spaces before command: aagetinfo
