Auto APN feature for FM trackers
How does Auto APN work
Auto APN feature allows device to select correct APN from integrated in firmware APN database. Tracker after turning ON will automatically search APN settings depending on inserted SIM card. When correct APN settings will be detected device will connect to the internet and FOTA server to check for configuration and firmware update.
• Auto APN is available from 03.25.15. Rev.51 (soon this feature will be added to basic firmware. Contact your sales manager to have this feature in devices for testing or from factory, make sure that your order code contains this firmware version).
• Firmware with Auto APN at the moment is compatible with: FMB1YX, FMB0X0, FMB9YX, MTB100, FMB2YX.
• To expand Auto APN list with a new APN or private APN for clients who using VPN’s - contact your sales manager.
How to configure Auto APN
Make sure the device is updated to the required 03.25.15. Rev.51 firmware version which have this feature. Devices ordered from factory with 03.25.15. Rev.51 firmware version already will have uploaded APN list. Otherwise if you updating your FM to this version, to have working Auto APN feature you will need to upload APN list into FM.
Instructions
1. Connect to the device using configurator and look for Transfer APN file section under GPRS tab. Press Upload button and locate your APN_list.bin file. (binary APN list can be named differently, make sure to use the correct file).
2. Wait for file upload confirmation shown below.
3. If APN_list.bin file is already uploaded to the device file Download and Delete options will be displayed. You can not upload another file if there is a file in the device so you must delete the old file from the device. When deleting wait for file delete confirmation.
Ordering
To create special order code - contact support team Existing ordering codes with 03.25.15. Rev51:
FMB920 - FMB920AECOC6 / SPQ 20
MTB100 - MTB10093INC6 / SPQ 10
