Main Page > CAN Trackers & Adapters > FMB140 > FMB140 Product Change NotificationsProduct change notifications (PCN) is the way of informing customers of upcoming changes related to Teltonika products. This includes outward appearance adjustments, hardware improvements, firmware changes, changes to package contents, etc.
This page stores information regarding changes to the FMB140 tracking device. Below you will find a list of both upcoming and already implemented changes sorted from newest to oldest (top to bottom).
2021.07.28: Base firmware update
| Change description
|
| Change type
|
Firmware update
|
| Detailed description
|
Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/FMB140_firmware_errata
|
Old version:
FMB140 03.25.16.Rev.410
|
New version:
FMB140 03.27.07.rev.00
|
| Change reasons
|
FMB140 base firmware version update
|
| Product release date
|
August 2021
|
2021.04.30: Bluetooth Improvement
We would like to inform you, that Bluetooth performance for the FMB140 device will be updated in the factory from August 2021.
| Change description
|
| Change type
|
Internal
|
| Detailed description
|
Bluetooth antennas are improved for FMB140 device ensuring better signal strength. The efficiency of Bluetooth antennas is considerably increased when receiving or transferring data.
|
| Change reasons
|
Following the changes, the capabilities of our devices will be greatly improved to provide better performance when Bluetooth signal is obstructed or longer distance coverage is required
|
| Product release date
|
August 2021
|
| Affected products
|
| Model
|
Affected order codes
|
Order code changes
|
| FMB140
|
FMB140******* order codes with base Firmware
|
No changes
|
| Change impact
|
| Risk assessment
|
No risk factors encountered with this change
|
| Suggested implementation plan
|
Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process
|
| Acknowledgement of PCN receipt
|
| If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
|
2021.04.16: Top Laser Printing Changes
We would like to inform you, that laser printing of the FMB140 device was updated in the factory on April 2021.
| Change description
|
| Change type
|
External/visual
|
| Detailed description
|
Top laser printing design changed
|
Old version:
|
New version:
|
| Change reasons
|
1. Added ANATEL label and certificate number.
|
| Product release date
|
April 2021
|
| Affected products
|
| Model
|
Affected order codes
|
Order code changes
|
| FMB140
|
FMB140*******
|
New casing
|
| Change impact
|
| Risk assessment
|
No risk factors encountered with this change
|
| Suggested implementation plan
|
Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process
|
| Acknowledgement of PCN receipt
|
| If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
|
2020.12.11: Base firmware update
| Change description
|
| Change type
|
Firmware update
|
| Detailed description
|
Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/FMB140_firmware_errata
|
Old version:
FMB140 03.25.16.Rev.281
|
New version:
FMB140 03.25.16.Rev.410
|
| Change reasons
|
FMB140 base firmware version update
|
| Product release date
|
2020 December 11th.
|
| Affected products
|
| Model
|
Affected order codes
|
Order code changes
|
| FMB140
|
FMB140******* order codes with base Firmware
|
Update firmware
|
| Change impact
|
| Risk assessment
|
Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically
|
| Suggested implementation plan
|
If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|
2020.12.01: Top Laser Printing Changes
We would like to inform you, that laser printing of the FMB140 device was updated in the factory in December 2020.
| Change description
|
| Change type
|
External/visual
|
| Detailed description
|
Top laser printing design changed
|
Old version:
|
New version:
|
| Change reasons
|
1. Updated Emark certificate number.
2. Added UKCA label.
3. Updated Teltonika brand to Teltonika Telematics.
|
| Product release date
|
December 2020
|
| Affected products
|
| Model
|
Affected order codes
|
Order code changes
|
| FMB140
|
FMB140*******
|
New casing
|
| Change impact
|
| Risk assessment
|
No risk factors encountered with this change
|
| Suggested implementation plan
|
Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process
|
| Acknowledgement of PCN receipt
|
| If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
|
2020.10.05: Base firmware update
We would like to inform you about the base firmware update for FMB140 starting from October 05th, 2020. The new production firmware version will be 03.25.16.Rev.281.
| Change description
|
| Change type
|
Firmware update
|
| Detailed description
|
Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/FMB140_firmware_errata
|
Old version:
FMB140 03.25.16.Rev.102
|
New version:
FMB140 03.25.16.Rev.281
|
| Change reasons
|
FMB140 base firmware version update
|
| Product release date
|
2020 October 05th.
|
| Affected products
|
| Model
|
Affected order codes
|
Order code changes
|
| FMB140
|
FMB140******* order codes with base Firmware
|
Update firmware
|
| Change impact
|
| Risk assessment
|
Client's special firmware versions or order codes with special firmware will not be updated to latest base firmware automatically
|
| Suggested implementation plan
|
If you are using special firmware version and would like an upgrade to new features of latest base firmware, please contact your Teltonika sales manager.
|
2019.12.02: Top Device Marking Changes
We would like to inform you, that tampography of the FMB140 device was updated to engraving in the factory on the 2nd of December.
| Change description
|
| Change type
|
External/visual
|
| Detailed description
|
Device marking changed from tampography to laser printing. Information provided on module will remain the same
|
| Old Version:
|
New Version:
|
| Change reasons
|
To improve manufacturing speed, efficiency and reliability
To increase quality, precision and durability of marking.
|
| Product release date
|
Planned date: 2019 December
|
| Affected products
|
| Model
|
Affected order codes
|
Order code changes
|
| FMB140
|
FMB140*******
|
No changes
|
| Change impact
|
| Risk assessment
|
No risk factors encountered with this change
|
| Suggested implementation plan
|
No implementation plan needed
|
| Acknowledgement of PCN receipt
|
| If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
|
2019.12.01: Top Label Changes
We would like to inform you, that label of the FMB140 device was updated in the factory in December 2019.
| Change description
|
| Change type
|
External/visual
|
| Detailed description
|
Top label design changed
|
Old Version:
|
New Version:
|
| Change reasons
|
Added E-Mark approval marking. (More information: FMB140 E-Mark)
|
| Product release date
|
Updated label will be used from the time when the stock will be sold all leftovers. Planned date: from December, 2019
|
| Affected products
|
| Model
|
Affected order codes
|
Order code changes
|
| FMB140
|
FMB140*******
|
No changes
|
| Change impact
|
| Risk assessment
|
No risk factors encountered with this change
|
| Suggested implementation plan
|
Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process
|
| Acknowledgement of PCN receipt
|
| If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
|
|
