Template:AVL ID List - Permanent elements

To search for compatible products, Expand all content

Permanent I/O elements


Property ID in AVL packet	Property Name	Bytes	Type	Value range		Multiplier	Units	Description	HW Support	Parameter Group
Property ID in AVL packet	Property Name	Bytes	Type	Min	Max	Multiplier	Units	Description	HW Support	Parameter Group
239	Ignition	1	Unsigned	0	1	-	-	0 – Ignition Off 1 – Ignition On	TFT100 TST100	Permanent I/O elements
240	Movement	1	Unsigned	0	1	-	-	0 – Movement Off 1 – Movement On	[Expand] TMT250 GH5200 TST100 TFT100 TAT100 TAT140	Permanent I/O elements
80	Data Mode	1	Unsigned	0	5	-	-	0 – Home On Stop 1 – Home On Moving 2 – Roaming On Stop 3 – Roaming On Moving 4 – Unknown On Stop 5 – Unknown On Moving	[Expand] TMT250 GH5200 TST100 TFT100 TAT100 TAT140	Permanent I/O elements
21	GSM Signal	1	Unsigned	0	5	-	-	Value in scale 1-5	TMT250 GH5200 TFT100 TST100 TAT100	Permanent I/O elements
200	Sleep Mode	1	Unsigned	0	4	-	-	0 - Sleep modes disabled 1 – GNSS sleep 2 – Deep sleep 3 – Online deep sleep 4 - Ultra deep sleep	TMT250 GH5200 TFT100 TST100	Permanent I/O elements
69	GNSS Status	1	Unsigned	0	3	-	-	0 - GNSS OFF 1 – GNSS ON with fix 2 - GNSS ON without fix 3 - GNSS sleep	TMT250 GH5200 TFT100 TST100 TAT100	Permanent I/O elements
181	GNSS PDOP	2	Unsigned	0	500	0.1	-	Probability	TMT250 GH5200 TFT100 TST100 TAT100	Permanent I/O elements
182	GNSS HDOP	2	Unsigned	0	500	0.1	-	Probability	TMT250 GH5200 TFT100 TST100 TAT100	Permanent I/O elements
24	Speed	2	Unsigned	0	350	-	km/h	Value	TMT250 GH5200 TFT100 TST100 TAT100	Permanent I/O elements
205	GSM Cell ID	2	Unsigned	0	65535	-	-	GSM base station ID	TMT250 GH5200 TFT100 TST100 TAT100	Permanent I/O elements
206	GSM Area Code	2	Unsigned	0	65535	-	-	Location Area code (LAC), it depends on GSM operator. It provides unique number which assigned to a set of base GSM stations.	TMT250 GH5200 TFT100 TST100 TAT100	Permanent I/O elements
67	Battery Voltage	2	Unsigned	0	65535	0.001	V	Voltage	TMT250 GH5200 TFT100 TST100 TAT100	Permanent I/O elements
68	Battery Current	2	Unsigned	0	65535	0.001	A	Current	TMT250 GH5200 TFT100 TST100	Permanent I/O elements
113	Battery Level	1	Unsigned	0	100	-	%	Battery capacity level	TMT250 GH5200 TST100 TFT100	Permanent I/O elements
66	External Voltage	2	Unsigned	0	65535	0.001	V	IO element is used to measure External Voltage, when External Voltage is < 65V.	TFT100 TST100	Permanent I/O elements
800	Extended External Voltage	4	Unsigned	0	0xFFFF	-	V	IO element is used to measure External Voltage, when External Voltage is > 65 V.	TFT100	Permanent I/O elements
241	Active GSM Operator	4	Unsigned	0	4294967295	-	-	Currently used GSM Operator code	TMT250 GH5200 TFT100 TST100 TAT100	Permanent I/O elements
199	Trip Odometer	4	Unsigned	0	2147483647	-	m	Trip Odometer value	TMT250 GH5200 TFT100 TST100	Permanent I/O elements
16	Total Odometer	4	Unsigned	0	2147483647	-	m	Total Odometer value	TMT250 GH5200 TFT100 TST100	Permanent I/O elements
1	Digital Input 1	1	Unsigned	0	1	-	-	Logic: 0/1	TFT100	Permanent I/O elements
2	Digital Input 2	1	Unsigned	0	1	-	-	Logic: 0/1	TFT100	Permanent I/O elements
3	Digital Input 3	1	Unsigned	0	1	-	-	Logic: 0/1	TFT100	Permanent I/O elements
262	Digital Input 4	1	Unsigned	0	1	-	-	Logic: 0/1	TFT100	Permanent I/O elements
179	Digital Output 1	1	Unsigned	0	1	-	-	Logic: 0/1	TFT100	Permanent I/O elements
180	Digital Output 2	1	Unsigned	0	1	-	-	Logic 0/1	TFT100	Permanent I/O elements
841	DOUT 1 Overcurrent	1	Unsigned	0	1	-	-	DOUT 1 Overcurrent IO element is used to indicate overcurrent on Digital Output 1. When Digital Output 1 overcurrent happens, it means that current level is > 300 mA, value is set to 1. Value 1 holds until 5 min timeout runs out. After timeout value is set to 0 if current level is < 300 mA. If current level is still > 300 mA value remains 1.	TFT100	Permanent I/O elements
842	DOUT2 Overcurrent	1	Unsigned	0	1	-	-	DOUT 2 Overcurrent IO element is used to indicate overcurrent on Digital Output 2. When Digital Output 2 overcurrent happens, it means that current level is > 300 mA, value is set to 1. Value 1 holds until 5 min timeout runs out. After timeout value is set to 0 if current level is < 300 mA. If current level is still > 300 mA value remains 1.	TFT100	Permanent I/O elements
9	Analog Input 1	2	Unsigned	0	65535	0.001	V	Voltage	TFT100	Permanent I/O elements
6	Analog Input 2	2	Unsigned	0	65535	0.001	V	Voltage	TFT100	Permanent I/O elements
839	Extended Analog Input 1	4	Unsigned	0	0xFFFF	-	V	Extended Analog Input 1 IO element is used to measure Analog Input 1 voltage, when Analog Input 1 voltage is > 65 V.	TFT100	Permanent I/O elements
840	Extended Analog Input 2	4	Unsigned	0	0xFFFF	-	V	Extended Analog Input 2 IO element is used to measure Analog Input 2 voltage, when Analog Input 1 voltage is > 65 V.	TFT100	Permanent I/O elements
303	Instant Movement	1	Unsigned	0	1	-	-	Logic: 0/1 returns movement value	TMT250 GH5200 TST100 TFT100 TAT100	Permanent I/O elements
17	Axis X	2	Signed	-8000	8000	0.001	G	X axis value	TMT250 GH5200 TFT100 TST100	Permanent I/O elements
18	Axis Y	2	Signed	-8000	8000	0.001	G	Y axis value	TMT250 GH5200 TFT100 TST100	Permanent I/O elements
19	Axis Z	2	Signed	-8000	8000	0.001	G	Z axis value	TMT250 GH5200 TFT100 TST100	Permanent I/O elements
11	ICCID1	8	Unsigned	0	0xffffffffffffffff	-	-	Value of SIM ICCID, MSB	TMT250 GH5200 TFT100 TST100 TAT100	Permanent I/O elements
14	ICCID2	8	Unsigned	0	0xffffffffffffffff	-	-	Value of SIM ICCID, MSB	TMT250 GH5200 TFT100 TST100 TAT100	Permanent I/O elements
72	Dallas Temperature 1	4	Signed	-550	1150	0.1	°C	Degrees ( °C ), -55 - +115, if 850 – Sensor not ready if 2000 – Value read error if 3000 – Not connected if 4000 – ID failed if 5000 – same as 850	TFT100	Permanent I/O elements
73	Dallas Temperature 2	4	Signed	-550	1150	0.1	°C	Degrees ( °C ), -55 - +115, if 850 – Sensor not ready if 2000 – Value read error if 3000 – Not connected if 4000 – ID failed if 5000 – same as 850	TFT100	Permanent I/O elements
74	Dallas Temperature 3	4	Signed	-550	1150	0.1	°C	Degrees ( °C ), -55 - +115, if 850 – Sensor not ready if 2000 – Value read error if 3000 – Not connected if 4000 – ID failed if 5000 – same as 850	TFT100	Permanent I/O elements
75	Dallas Temperature 4	4	Signed	-550	1150	0.1	°C	Degrees ( °C ), -55 - +115, if 850 – Sensor not ready if 2000 – Value read error if 3000 – Not connected if 4000 – ID failed if 5000 – same as 850	TFT100	Permanent I/O elements
76	Dallas Temperature ID 1	8	Unsigned	0	0xffffffffffffffff	-	-	Dallas sensor ID	TFT100	Permanent I/O elements
77	Dallas Temperature ID 2	8	Unsigned	0	0xffffffffffffffff	-	-	Dallas sensor ID	TFT100	Permanent I/O elements
79	Dallas Temperature ID 3	8	Unsigned	0	0xffffffffffffffff	-	-	Dallas sensor ID	TFT100	Permanent I/O elements
71	Dallas Temperature ID 4	8	Unsigned	0	0xffffffffffffffff	-	-	Dallas sensor ID	TFT100	Permanent I/O elements
78	iButton	8	Unsigned	0	0xffffffffffffffff	-	-	iButton ID	TFT100	Permanent I/O elements
15	Eco Score	2	Unsigned	0	65535	0.01	-	Average amount of events on some distance	TFT100	Permanent I/O elements
116	Charger Connected	1	Unsigned	0	1	-	-	0 - charger is not connected 1 - charger is connected	TMT250 GH5200	Permanent I/O elements
854	User ID	4	Unsigned	0	0xFFFFFFFF	-	-	This parameter allows to send custom number as AVL ID parameter. Configurable in `Features` section.	TMT250 GH5200	Permanent I/O elements
387	ISO6709 Coordinates	34	HEX	0	0x7fffffffffffffff	-	-	ISO6709 Coordinates Latitude, Longitude (in Degrees, Minutes and Seconds) and Altitude: IO value format: ±DDMMSS.SSSS±DDDMMSS.SSSS±AAA.AAA/	TMT250 GH5200 TFT100 TST100 TAT100	Permanent I/O elements
288	GSM Cell ID 1	2	Unsigned	0	65535	-	-	Unique ID of the Cell 1	TAT100	Permanent I/O elements
291	GSM Cell ID 2	2	Unsigned	0	65535	-	-	Unique ID of the Cell 2	TAT100	Permanent I/O elements
294	GSM Cell ID 3	2	Unsigned	0	65535	-	-	Unique ID of the Cell 3	TAT100	Permanent I/O elements
297	GSM Cell ID 4	2	Unsigned	0	65535	-	-	Unique ID of the Cell 4	TAT100	Permanent I/O elements
287	GSM Cell LAC 1	2	Unsigned	0	65534	-	-	Location Area Code of the Cell 1	TAT100	Permanent I/O elements
290	GSM Cell LAC 2	2	Unsigned	0	65534	-	-	Location Area Code of the Cell 2	TAT100	Permanent I/O elements
293	GSM Cell LAC 3	2	Unsigned	0	65534	-	-	Location Area Code of the Cell 3	TAT100	Permanent I/O elements
296	GSM Cell LAC 4	2	Unsigned	0	65534	-	-	Location Area Code of the Cell 4	TAT100	Permanent I/O elements
1200	GSM Cell MNC 1	1	Unsigned	-	-	-	-	Mobile Network Code of the Cell 1	TAT100	Permanent I/O elements
1201	GSM Cell MNC 2	1	Unsigned	-	-	-	-	Mobile Network Code of the Cell 2	TAT100	Permanent I/O elements
1202	GSM Cell MNC 3	1	Unsigned	-	-	-	-	Mobile Network Code of the Cell 3	TAT100	Permanent I/O elements
1203	GSM Cell MNC 4	1	Unsigned	-	-	-	-	Mobile Network Code of the Cell 4	TAT100	Permanent I/O elements
286	GSM Signal RX 0	1	Unsigned	0	7	-	-	GSM Signal of the Cell 0	TAT100	Permanent I/O elements
289	GSM Signal RX 1	1	Unsigned	0	7	-	-	GSM Signal of the Cell 1	TAT100	Permanent I/O elements
292	GSM Signal RX 2	1	Unsigned	0	7	-	-	GSM Signal of the Cell 2	TAT100	Permanent I/O elements
295	GSM Signal RX 3	1	Unsigned	0	7	-	-	GSM Signal of the Cell 3	TAT100	Permanent I/O elements
298	GSM Signal RX 4	1	Unsigned	0	7	-	-	GSM Signal of the Cell 4	TAT100	Permanent I/O elements
399	Time To First Fix	1	Unsigned	0	4294967295	-	s	Amount of time it took to get first GNSS fix	TAT100	Permanent I/O elements
20015	Modem Uptime	1	Unsigned	0	4294967295	-	s	Modem Uptime since the last wake up	TAT100	Permanent I/O elements
449	Ignition On Counter value		Unsigned	0	2147483647	-	s	Current value of the counter	TFT100	Permanent I/O elements