FTC921 First Start

Main Page > Basic Trackers > FTC921 > FTC921 First Start

Small and smart tracker [[Image:|400px|right]]


HOW TO INSERT MICRO-SIM CARD AND CONNECT THE BATTERY

  1. Gently remove FTC921 cover using plastic pry tool from one side.
  2. Gently remove FTC921 cover using plastic pry tool from another side.
  3. Insert Nano-SIM card as shown. Make sure that Nano-SIM card cut-off corner is pointing forward to slot.
  4. Connect the battery as shown on device. Position the battery in place where it does not obstruct other components.
  5. Attach device cover back. Device is ready to be connected.

   


 
Nano-SIM card insertion/removal must be performed when device is powered off – external voltage and internal battery disconnected. Otherwise Nano-SIM card might be damaged or device will not detect it.