Default Parameters Values Update
From Wiki Knowledge Base | Teltonika GPS
Revision as of 12:19, 2 October 2023 by Airidas.S (talk | contribs) (→Default Parameters Values Update)
Default Parameters Values Update
Starting from firmware 03.29.00.Rev.04 default values of some parameters is updated to provide more comfortable solution for clients List of changes:
| Name | Default value in 03.27.XX firmware versions | Default value in 03.29.XX firmware versions |
| Parameter ID 102 - (Sleep Mode // Sleep Settings) | 2 - (Deep Sleep) | 3 - (Online Deep Sleep) |
| Sleep Timeout (minutes)) | 1440 | 120 |
| Allow AGPS in Home Network) | 1 - (Enable) | 0 - (Disabled) |
| Max Acceleration, m/s^2) | 2.50 | 2.31 |
| Max Braking, m/s^2) | 2.70 | 2.52 |
| Max Cornering, rad/s) | 3.40 | 2.94 |
| Unplug Detection Mode) | 0 - (Simple) | 1 - (Advanced) |
| Duration, ms) | 20 | 10 |
| Crash Trace) | 0 - (Disable) | 2 - (Trace Full) |
| X geozone, Generate Event) | 0 - (No Event) | 3 - (On Both) |
| Scan retries until error, seconds) | 30 | 10 |
| Program number) | 0 | 11120 |
| Data Acquisition Change) | 0 | 11120 |
Review all parameter setting in https://wiki.teltonika-gps.com/view/FMB920_Parameter_list
