Default Parameters Values Update
From Wiki Knowledge Base | Teltonika GPS
Default Parameters Values Update
Starting from firmware 03.29.00.Rev.04 default values of some parameters is updated to provide more comfortable solution for clients List of changes:
| Name | Default value in 03.27.XX firmware versions | Default value in 03.29.XX firmware versions |
| Parameter ID 102 - (Sleep Mode / Sleep Settings) | 2 - (Deep Sleep) | 3 - (Online Deep Sleep) |
| Parameter ID 103 - (Sleep Mode / Sleep Timeout (minutes)) | 1440 | 120 |
| Parameter ID 234 - (Assisted GPS Settings / Allow AGPS in Home Network) | 1 - (Enable) | 0 - (Disabled) |
| Parameter ID 11004 - (Eco/Green Driving / Max Acceleration, m/s^2) | 2.50 | 2.31 |
| Parameter ID 11005 - (Eco/Green Driving / Max Braking, m/s^2) | 2.70 | 2.52 |
| Parameter ID 11006 - (Eco/Green Driving / Max Cornering, rad/s) | 3.40 | 2.94 |
| Parameter ID 11502 - (Unplug Detection / Unplug Detection Mode) | 0 - (Simple) | 1 - (Advanced) |
| Parameter ID 11407 - (Crash Detection / Duration, ms) | 20 | 10 |
| Parameter ID 11406 - (Crash Detection / Crash Trace) | 0 - (Disable) | 2 - (Trace Full) |
| Parameter ID 20101,20121,20141,etc - (Manual Geofence / X geozone, Generate Event) | 0 - (No Event) | 3 - (On Both) |
| Parameter ID 11816 - (BT 4.0 / Scan retries until error, seconds) | 30 | 10 |
| Parameter ID 11120 - (CAN Adapter / Program number) | 0 | 11120 |
| Parameter ID 11120 - (Towing / Data Acquisition Change) | 0 | 11120 |
Review all parameter setting in https://wiki.teltonika-gps.com/view/FMB920_Parameter_list
