154
edits
Changes
Advanced Pulse Counter (view source)
Revision as of 12:30, 24 February 2023
, 12:30, 24 February 2023no edit summary
# Frequency is measured by counting pulses over time period (997 ms). Method is used for frequencies higher than 100 Hz.
# Frequency is measured by counting pulses over time period (997 ms). Method is used for frequencies higher than 100 Hz.
# Frequency is measured by measuring time between pulses. Method is used for frequencies lower than 100 Hz.
# Frequency is measured by measuring time between pulses. Method is used for frequencies lower than 100 Hz.
When 2kHz pulse counter is enabled, all other scenarios '''will ignore''' corresponding DIN state, except DIN1 which can be used to wakeup device from Deep Sleep.
== Parameter values ==
== Parameter values ==
|50Hz
|50Hz
|2kHz
|2kHz
|-
|-
|FMB110/FMB120/FMB130/FMB140
|FMB110/FMB120/FMB130/FMB140
