Wiki Knowledge Base | Teltonika GPS

Changes

BASIC TRACK & TRACE (view source)

Revision as of 09:46, 31 October 2022

334 bytes removed ,  09:46, 31 October 2022
no edit summary
Line 33: Line 33:     
[[File:MAGNET.png|alt=|left|thumb|600x200px]]
 
[[File:MAGNET.png|alt=|left|thumb|600x200px]]
 +
 +
 +
 +
    
Additional accessories such as '''EYE SENSOR''' or '''EYE BEACON''' can be used for this solution. EYE SENSOR can transmit to the tracker parameters such as temperature, humidity, angle, movement, data on the presence of a magnetic field. EYE SENSOR and EYE BEACON can transmit a unique identification number, which can be used in many scenarios, such as an immobilizer, more details [https://wiki.teltonika-gps.com/view/FMB920_Features_settings#Immobilizer here]. Also, check more detailed information about EYE SENSOR and EYE BEACON [https://wiki.teltonika-gps.com/view/EYE_SENSOR_/_BTSMP1 here] and [https://wiki.teltonika-gps.com/view/EYE_BEACON_/_BTSID1 here].
 
Additional accessories such as '''EYE SENSOR''' or '''EYE BEACON''' can be used for this solution. EYE SENSOR can transmit to the tracker parameters such as temperature, humidity, angle, movement, data on the presence of a magnetic field. EYE SENSOR and EYE BEACON can transmit a unique identification number, which can be used in many scenarios, such as an immobilizer, more details [https://wiki.teltonika-gps.com/view/FMB920_Features_settings#Immobilizer here]. Also, check more detailed information about EYE SENSOR and EYE BEACON [https://wiki.teltonika-gps.com/view/EYE_SENSOR_/_BTSMP1 here] and [https://wiki.teltonika-gps.com/view/EYE_BEACON_/_BTSID1 here].
 +
[[File:OBDdongle.png|alt=|left|thumb|800x300px]]
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
You can also use third-party '''OBD BT dongles''' for this solution (if there is a need to get data from the vehicle's OBDII interface. You can read more about selecting the appropriate OBD BT dongle models [https://wiki.teltonika-gps.com/view/How_to_connect_OBD_II_Bluetooth_Dongle_to_FMB_device#Supported_Bluetooth_OBD_II_dongles here].
 +
 +
<br>
 +
 +
 +
 +
 +
   −
To have a working solution it’s important to properly wire the devices. In the picture below it's shown how to correctly wire the devices.
     −
[[File:Can-control_connection_example_updated.png|alt=|middle|frameless|700x200px]]
     −
During installation please follow recommendations in order to '''avoid damaging''' device and vehicle:
     −
*Wires should be connected while the module is '''not plugged''' in.
  −
*Be sure that after the car computer falls asleep, power is still available on the chosen wire. Depending on the car, this may happen in a 5 to 30 minutes period.
  −
*When the module is connected, be sure to measure the voltage again if it did not decrease.
  −
*The ground wire is connected to the vehicle frame or metal parts that are fixed to the frame.<br>
      
==Configuration==
 
==Configuration==
Retrieved from "https://wiki.teltonika-gps.com/view/Special:MobileDiff/77718"