Changes

==Blue ID description==

==Blue ID description==

The Blue ID works as a beacon, which can allow users to track and identify trucks, tippers and containers on industrial sites using Bluetooth. This BLE sensor constantly broadcasts its own ID, which can be detected by FMB devices that support Beacons.

The Blue ID works as a beacon, which can allow users to track and identify trucks, tippers and containers on industrial sites using Bluetooth®. This BLE sensor constantly broadcasts its own ID, which can be detected by FMB devices that support Beacons.

==Technical Data==

==Technical Data==

*'''Battery:''' Lifecycle up to 5 years

*'''Battery:''' Lifecycle up to 5 years

*'''Bluetooth:''' 2,4 GHz - Bluetooth Low Energy 4.0/4.2

*'''Bluetooth®:''' 2,4 GHz - Bluetooth® Low Energy 4.0/4.2

*'''NFC:''' Supported

*'''NFC:''' Supported

*'''Dimensions:''' ø 36 mm base - Thickness 10 mm - 2 mounting ø 3 mm holes, spaced of 32 mm

*'''Dimensions:''' ø 36 mm base - Thickness 10 mm - 2 mounting ø 3 mm holes, spaced of 32 mm

==Using Blue ID with Teltonika FMB1 devices==

==Using Blue ID with Teltonika FMB1 devices==

===Configuring Teltonika Device===

===Configuring Teltonika Device===

<p>1. Connect the device to the configurator and go to Bluetooth settings. Make sure that BT Radio is set to Enable (visible) or Enable (hidden)

<p>1. Connect the device to the configurator and go to Bluetooth® settings. Make sure that BT Radio is set to Enable (visible) or Enable (hidden)

[[Image:BTRadio_Enable.png|300x200px|center|upright=0.35]]

[[Image:BTRadio_Enable.png|300x200px|center|upright=0.35]]

<p>1. In order for the Blue ID beacon to start transmitting data, it will have to be turned on. To enable your BLE sensors or BLE Beacons use the [https://play.google.com/store/apps/details?id=com.ela.mobileapp.elamobileapp&hl=en_US| Device Manager Mobile] application. Your phone or device that is used for configuring BLE Sensors or Beacons has to have NFC (configurations are written to a sensor or beacon through NFC).

<p>1. In order for the Blue ID beacon to start transmitting data, it will have to be turned on. To enable your BLE sensors or BLE Beacons use the [https://play.google.com/store/apps/details?id=com.ela.mobileapp.elamobileapp&hl=en_US| Device Manager Mobile] application. Your phone or device that is used for configuring BLE Sensors or Beacons has to have NFC (configurations are written to a sensor or beacon through NFC).

<br><br>Below you can find on how to Enable and configure ELA Coin ID or ELA Puck ID to send in the iBeacon format:

<br><br>Below you can find on how to Enable and configure Coin ID or Puck ID to send in the iBeacon format:

[[Image:Blue_Configuration.png|center|400px]]

[[Image:Blue_Configuration.png|center|400px]]

After configuring the settings, press Write tag and then attach the Beacon you are configuring. Once the tag is written successfully, the beacon will be enabled and will use the settings configured in the app.

After configuring the settings, press Write tag and then attach the Beacon you are configuring. Once the tag is written successfully, the beacon will be enabled and will use the settings configured in the app.