Difference between revisions of "EYE SENSOR / BTSMP1"

Revision as of 12:31, 22 March 2024

Main Page > Sensors > EYE SENSOR / BTSMP1

Introduction

Wireless solutions open up new horizons for your business and help to keep an eye on your assets. Discover our brand-new and certified Bluetooth® Low Energy ID sensor model from Teltonika with robust waterproof casing and a long-lifetime battery. The model is designed for a low-cost fast and easy configuration and integration to save precious time, resources, and ensure accountability.

About BTSMP1

Perfect for traceability use cases, delivery tracking, monitoring of various movable objects in logistics (trailers, containers), agriculture (tractor attachments), and constructions (tools and inventory). Sensors data makes it especially suitable for cold chain refrigerator use cases. The built-in accelerometer can detect item movement, pitch and roll of the device. Magnet detection can be used for wireless open/close detection and notifications such as trailer door events, etc. EYE sensor supports iBeacon and Eddystone protocols. The device is fully compatible with the Teltonika firmware platform which provides extended functionality. Configure, scan, and update anytime anywhere with a dedicated Teltonika mobile app

Product Specification

Features


Functionalities
Beacon ID, LED, Temperature, Humidity, Accelerometer, Magnet detection


Dimensions and weight
Dimensions	56,6 mm x 38 mm x 13 mm
Weight	18g


Battery and power
Model	CR2450
Type	Type Lithium, Manganese Dioxide
Total Capacity	600 mAh
Replaceable	No
Battery life (Tx=2 dBm; interval: 3 s)	2.5+ years
Battery life (Tx=2 dBm; interval: 5 s), default	4+ years
Battery life (Tx=2 dBm; interval: 10 s)	5+ years


Connectivity
Bluetooth®	Bluetooth® 4.2 compliant, Bluetooth® 5.2 certified
Range	80 m
Available transmission power levels	Up to 8 dBm
Sensitivity	-88 dBm


Casing
Protection	IP67
Mounting	Two holes to screw/leash/strip, tape
Customization	Custom logo upon request (Special conditions)


Environmental Requirements
Humidity (non-condensing)	From 0% to 100%
Operational temperature	-20°C / +60°C (-4°F / +140°F)


Protocols compatibility
iBeacon	Yes *iOS doesn't show devices with iBeacon protocol
Eddystone	Yes
EYE Sensor	Yes

Dimensions

Value-adding Features

Hibernate mode

Hibernated mode means that the EYE device is OFF when shipping from the factory, preserving battery life. PLEASE NOTE that EYE devices are available in two modes: factory-activated (ON) or Hibernated (OFF). You may order the device version which better suits your needs. Order codes are described on eye page

Value of hibernate mode

Hibernated versions of EYE devices simplify stock management for our partners while maximizing battery life.
1. Accelerated delivery times:

By stocking up on hibernated EYE devices, you ensure readiness to deploy EYE devices with full battery capacity at any moment. This proactive approach provides fastest possible service, increases your reputation for efficiency and positions you as an industry frontrunner, enhancing your competitive edge.

2. Mitigated project risks:

In scenarios where projects encounter unforeseen challenges, our hibernated EYE devices offer a buffer. Hibernate feature allows to safeguard your investments and potential revenue streams. This means that even if projects encounter delays or complications, you can still deploy EYE devices with full battery capacity, ensuring optimal performance when the time is right.

How to activate hibernated eye device?

Attach any magnet to sleeping device and wait for LED to blink.
NOTE: ANY MAGNET CAN BE USED

Now device is discoverable, scannable, connectable via BLE.

How to send the device to hibernate mode?

If you want to put the EYE device back to hibernate mode after accidental activation or simply pause its use, you may do that following steps below:
Step 1. While connected and in overview tap "Send device to sleep":
Step 2. Confirm your selection:
Step 3. Wait for EYE App to disconnect:

Can All devices hibernate?

1. All EYE Sensors with firmware version starting from 1.2.9.R.8 can hibernate.

2. Only new EYE Beacons bought with order codes that have hardware modification can hibernate standard codes are available in eye page, for special order codes consult your sales manager.

Mounting recomendations

EYE App Configuration

Devices work constantly and are ready to perform out of the box. Default basic Sensor settings are set to:
• Transmitting at 2 dBm power.
• Data advertising at 1 second intervals.
• Eddystone and Sensors protocol

If you would like to change these settings you will need to:
1) Download and install EYE APP - Teltonika application to change sensor settings.

Eye App Overview

With the application you will be able to scan for visible Teltonika EYE devices, check their statuses or connect for configuration or firmware update.

Devices in view

In this window you will see all visible devices. You have options to see devices in Short list or in default list. When looking at devices in default list you will be able to open Detailed view of devices and check transmitted data statuses. Additionaly if you are looking for specific devices you will be able to use Search function to filter search options. When in this window select a device of your choice to connect and after passing pin code (default pin code is 123456) you will go to device overview window.

Overview window

In overview window you can see device details, check firmware version and update if available, go to device configuration settings and download the configuration. If you select to Configure device new window will open with Basic and Advanced settings. Other actions include changing the device PIN code and putting the device to sleep. A device in sleep mode will no longer be findable or connectable via the app. To wake it up, you need to attach a magnet and look for a green LED flashing.

Configure window

In this window you can check and change device configuration settings. In main tab Basic Settings you can change main settings. Change Device name, Power signal strength, Advertising interval and Packet transmission type*. For more settings go to Advanced settings tab to enable various events.

Advanced configuration window

Advanced configuration: Beacon Settings

In Advanced settings tab you can can configure EYE beacon sensor parameters: Beacon information (iBeacon ID*, Eddystone ID). UUID/MINOR/MAJOR parameter can be changed for iBeacon ID*. Namespace ID/Instance ID can be changed for Eddystone ID. If you scroll down you will be able to adjust Sensor reading interval and event settings of the EYE Sensor Note: iOS doesn't show devices with iBeacon protocol

Advanced configuration: Sensor reading and events

!NOTE: These settings are no longer available after EYE APP 1.2.0-60 update.


Magnetic field event - adjust if the device generates events based on detection or exit (loss) of the magnet.	Humidity event - adjust if the device generates events based on entrance or exit to selected humidity range	Temperature event - adjust if the device generates events based on entrance or exit to selected temperature range	Movement event - adjust movement/stop detection and timeouts it takes to register movement / stopping

Maximum event duration - how long will one event be advertised	Event advertising settings - advertising period after event detection	Sensor reading interval - how often values are updated by the device

FM Tracker Configuration

Teltonika configurator (Base firmware / advanced mode)

If you have firmware / configurator which does not support EYE sensor tab in Bluetooth® 4.0 section, then you can still use Avanced BLE configuration to connect with EYE Sensors.

To configure FM with BTSMP1 EYE Sensor:

Requirements:

Firmware/configurator version with multiple custom IO fields per sensor, we recommend:

FMBXXX: 03.27.07.Rev.00/1.7.22_B.3.27_R.21 or newer

FMX640: 01.02.03/1.7.24_B.FM64_R.34 or newer (FMB640 does not support for BLE functionality)

Step 1: Check EYE App Settings:

Make sure that name of the sensor is default length (10 symbols) in EYE App Basic Configuration window
Note what Packet settings you have set in EYE App Basic Configuration window

Step 2: Configure FM device using Teltonika configurator:

In System settings Enable Codec8 Extended;
In GPRS settings Configure GPRS Settings and Server Settings
In Bluetooth® settings Enable Bluetooth®, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth® will be disabled;
In Bluetooth® 4.0 settings:
1. set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
2. In Bluetooth® 4.0 settings Advanced Mode Settings Load EYE Sensor preset according to packet settings in EYE app(if you do not have preset you can download them from below table)
3. Configure MAC address of the sensor
To receive data to server enable corresponding IO elements in FMB120 I/O settings

Advanced mode configuration:

EYE Sensor Packet Setting:
Preset you should use:	EYE Sensors	EYE iBeacon	EYE Eddystone
FMBXXX Preset download link:
FMBXXX Configuration example download link:
FMX640 Preset download link:
Instructions how you can manually add a preset: link

Preset Configuration:

If EYE Sensor Packet Settings is EYE Sensors or Eddystone and EYE Sensors:

If EYE Sensor Packet Settings is EYE Sensors or iBeacon and EYE Sensors:

IO element value descriptions:


NAME	DESCRIPTION
Custom1	Flags (not supported with current FMX640 preset)
Temperature	Ambient temperature in Celsius
Humidity	Ambient humidity in percent
Custom2	Movement and movement events count
Custom3	Angle
Custom4	Battery voltage (2000 + (VALUE * 10)) in mV

Property ID in AVL packet	Property name	Bytes	Type	Min	Max	Multiplier	Units	Description
25	BLE Temperature #1	2	Signed	-4000	12500	0.01*	°C	Degrees ( °C ), -40 - +125; Error codes: 4000 - abnormal sensor state 3000 - sensor not found 2000 - failed sensor data parsing
26	BLE Temperature #2	2	Signed	-4000	12500	0.01*	°C	Degrees ( °C ), -40 - +125; Error codes: 4000 - abnormal sensor state 3000 - sensor not found 2000 - failed sensor data parsing
27	BLE Temperature #3	2	Signed	-4000	12500	0.01*	°C	Degrees ( °C ), -40 - +125; Error codes: 4000 - abnormal sensor state 3000 - sensor not found 2000 - failed sensor data parsing
28	BLE Temperature #4	2	Signed	-4000	12500	0.01*	°C	Degrees ( °C ), -40 - +125; Error codes: 4000 - abnormal sensor state 3000 - sensor not found 2000 - failed sensor data parsing
86	BLE Humidity #1	2	Unsigned	0	1000	0.1*	%RH	Humidity
104	BLE Humidity #2	2	Unsigned	0	1000	0.1*	%RH	Humidity
106	BLE Humidity #3	2	Unsigned	0	1000	0.1*	%RH	Humidity
108	BLE Humidity #4	2	Unsigned	0	1000	0.1*	%RH	Humidity
331	BLE 1 Custom #1	Variable	HEX	0	-	-	-	Custom IO element for BLE sensor
463	BLE 1 Custom #2	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
464	BLE 1 Custom #3	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
465	BLE 1 Custom #4	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
466	BLE 1 Custom #5	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
332	BLE 2 Custom #1	Variable	HEX	0	-	-	-	Custom IO element for BLE sensor
467	BLE 2 Custom #2	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
468	BLE 2 Custom #3	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
469	BLE 2 Custom #4	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
470	BLE 2 Custom #5	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
333	BLE 3 Custom #1	Variable	HEX	0	-	-	-	Custom IO element for BLE sensor
471	BLE 3 Custom #2	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
472	BLE 3 Custom #3	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
473	BLE 3 Custom #4	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
474	BLE 3 Custom #5	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
334	BLE 4 Custom #1	Variable	HEX	0	-	-	-	Custom IO element for BLE sensor
475	BLE 4 Custom #2	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
476	BLE 4 Custom #3	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
477	BLE 4 Custom #4	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor
478	BLE 4 Custom #5	8	UNSIGNED LONG INT	0	4294967295	-	-	Custom IO element for BLE sensor

Teltonika configurator new functionalities (Evaluation firmware / EYE Sensor filtering by name)

Starting with firmware 03.28.04.Rev.207 there is additional tabs available in Bluetooth® 4.0 section that allow for easier configuration to connect FM and EYE sensor or beacon.

It's now possible to connect up to 100 sensors at once just by entering one name in the configurator name list. It's required to enter at least 3 characters(case sensitive) in the name for FM to scan the sensors. Super easy to set up!

For example, the you may order Sensors with special configuration from factory where the EYE Sensor names would be TRAILER_1,TRAILER_2,...,TRAILER_99 and so on.

If you would enter TRAILERS in the EYE Fimrware FM configurator then sensors who meet this name condition, for example TRAILER_1, TRAILER_21 , TRAILER_17, would be scanned, while other sensors named Tools, MP1_123546, etc. will not be scanned. With this option, you can upload one configuration to FOTA web and it doesn’t matter which sensor from the list end user will mount, it will be scanned and sent to the server as long as it meets the name criteria.

Bluetooth® 4.0
Functionalities were reorganized and transferred to Bluetooth® 4.0 configuration tab with additional horizontal tabs selection for specific settings:

Global - Parameters responsible for device scanning ability like power and duratations.
EYE - Parameters to configure data reading from EYE sensors.

Common settings

Non Stop Scan - Enable Non Stop Scan feature, the device will try to scan for the sensors all the time if any of them are configured.
Sensors and Beacons Update frequency - changes sensors temperature/humidity/battery voltage data update frequency. Minimum value: 30s, maximum value: 65535s. Recommended value 30.
BLE Scan Duration - Sensors data reading time. Recommended value 30.
Scan retries until error - Scan retries count, till start to show the value as Error '3000' - sensor disconnected. Recommended value 30.
BT Power Level - Telematics device Bluetooth® power level setting.
BLE Broadcasting service ID - Telematics device can broadcast configured ID.
BLE connection control - Connection mode settings. If broadcasting ID is configured, parameter should be set to Prohibit.

Sensors
Sensor Configuration can be set to Custom Sensors, Eye Sensors or both. With the Custom Sensors setting enabled, any BLE sensor can be configured.
When EYE Sensors is selected, Eye Sensor connectionless functionalities or EYE list search window will appear, depending on the selected EYE Sensor filter.

Name
When EYE Sensors Filter is set to Name, the Eye List search window will appear on the configurator. With this setting, separate EYE Sensor records (AVL ID: 11317) will be generated according to the configured parameters, which are described below:

Data Clear period- defines how long the FM tracker waits when the Eye sensor is not detected before removing it from the Eye Sensor list and not sending the sensor values. If Data Clear Period is set to 0, then the EYE Sensor will not be removed from the EYE Sensor list and it will always be included in the periodic records.

RSSI- Parameter defines the dBm threshold value of when the EYE sensor will be added to the sensor list. If the FM tracker detects the RSSI lower than the configured value, it will not be added to the EYE Sensor list.

Record period - Defines how often the EYE Sensor record (AVL ID: 11317) will be generated when the FM tracker is operating On Stop or On Move modes, according to the configured movement source..

EYE Sensor Settings - Define what sensor readings data is included in to the EYE Sensor Records. Sensor readings which are not needed can be disabled, to reduce data consumption.
EYE Name list - Defines what EYE sensors will be added to EYE Sensor list. For EYE Sensors to be added to the list, only the beginning part of the EYE Sensor local name has to match. For example, if in the EYE name list “EYE_SENSOR” is added and the FM tracker detects EYE_SENSOR1, EYE_SENSOR2, EYE_SENSORXYZ, all these EYE Sensors will be added to EYE Sensor list. If the EYE name list is left empty, all the detected EYE Sensors will be included in the EYE Sensor list. NOTE: If EYE Sensor has a name that matches configured one in EYE Name List and if it has a MAC address, that matches configured one in EYE Sensors filtered by MAC address, then such sensor will not be added to EYE Sensor list, but it’s data will be added according EYE Sensor filtered by MAC IO elements.

Once Eye Sensor filtering by name list is selected, EYE Sensor records containing the AVL ID:11317 will start being generated. Below is an example of how EYE Sensor data is packed into AVL ID 11317
AVL ID 11317 structure


Eye Sensor #1
EYE Sensor #1 Data length	1 byte
1st Parameter ID	1 byte
1st Parameter Data Length	1 byte
1st Parameter Data	variable
2nd Parameter ID	1 byte
2nd Parameter Data Length	1 byte
2nd Parameter Data	variable
<...>
Nth Parameter ID	1 byte
Nth Parameter Data Length	1 byte
Nth Parameter Data	variable
Eye Sensor #2
Eye Sensor #2 Data length	1 byte
1st Parameter ID	1 byte
1st Parameter Data Length	1 byte
1st Parameter Data	variable
2nd Parameter ID	1 byte
2nd Parameter Data Length	1 byte
2nd Parameter Data	variable
<...>
Nth Parameter ID	1 byte
Nth Parameter Data Length	1 byte
Nth Parameter Data	variable
Eye Sensor #N
...	...

Parameter IDs are used to identify what type of EYE Sensor information is included in the packet. Below is the table describing the possible EYE Sensor parameter IDs, along with their data type and data length.

**Table 1. EYE Sensor Parameter IDs**
Parameter ID	Name	Data type	Description
5	Eye Sensor Device Name	Array	Device’s name from Device Name List tab
6	EYE Sensor Temperature	2 byte signed integer	Temperature value measured by EYE Sensor from List Values from -32768 to +32768 with 0.01 C delta
7	EYE Sensor Humidity	1 byte unsigned integer	Humidity measured by EYE Sensor from List Values from 0 to 100%
8	EYE Sensor Magnet presence	1 byte unsigned integer	Magnet measured by EYE Sensor from List Values from 0 to1
9	EYE Sensor Movement presence	1 byte unsigned integer	Movement measured by Eye Sensor from List Values
10	EYE Sensor Movement count	2 byte unsigned integer	Movement counts measured by EYE Sensor from List Values
11	EYE Sensor Pitch	1 byte signed integer	Pitch angle measured by Eye Sensor from list Values
12	EYE Sensor Angle Roll	2 byte signed integer	Roll Angle measured by EYE Sensor from List Values
13	EYE Sensor Low battery indicator	1 byte unsigned integer	Low battery state measured by EYE Sensor from List Values from 0 to1
14	EYE Sensor Battery voltage	2 byte unsigned integer	Low battery state measured by EYE Sensor from List Values from 0 to1
15	EYE Sensor MAC adress	6 byte unsigned integer	Device's MAC adress
16	EYE Sensor Magnet trigger count*	2 byte unsigned integer	Magnet trigger counts measured by EYE Sensor from List Values *Only available with evaluation firmware BTSX.1.2.8.magcounter.R.0 of EYE Devices

MAC
IF EYE Sensors are selected to be filtered by MAC address, separate EYE sensor records will not be generated; EYE sensor values will be included into regular records with their corresponding IO elements. Up to 4 EYE Sensors can be configured with different MAC Addresses. In the case of filtering by MAC Address, more advanced configuration is possible, as EYE Sensors’ IOs’ Low, High level, Event Only and Operand parameters can also be configured separately for each IO.

Working Mode - parameter has 2 options – Disabled and EYE Sensor. When it is disabled, EYE Sensor IO values will not be included into the records. When EYE Sensor is selected, EYE Sensor IO values will be included into records.
MAC Settings - parameter specifies the MAC address of the EYE Sensor for the FM tracker to read, parse its data and put to corresponding IO elements. If the sensor is not found for set amount of scan retries, error values will be stored into IO elements.
I/O elements - allows for advanced EYE sensor I/O elements configuration.

EYE Sensor AVL IDs

Table below describes I/O elements which were added for EYE sensor with the new functionalities release.

Property ID in AVL packet	Property name	Bytes	Type	Min	Max	Multiplier	Units	Description
11317	EYE Sensor List	variable length	HEX	0 bytes	1024 bytes	-	-	EYE Sensor List
10800	EYE Temperature 1	2	Signed	-32768	32768	0,01	°C	Temperature measured by EYE sensor 1
10801	EYE Temperature 2	2	Signed	-32768	32768	0,01	°C	Temperature measured by EYE sensor 2
10802	EYE Temperature 3	2	Signed	-32768	32768	0,01	°C	Temperature measured by EYE sensor 3
10803	EYE Temperature 4	2	Signed	-32768	32768	0,01	°C	Temperature measured by EYE sensor 4
10804	EYE Humidity 1	1	Unsigned	0	100	-	%	Humidity measured by EYE sensor 1
10805	EYE Humidity 2	1	Unsigned	0	100	-	%	Humidity measured by EYE sensor 2
10806	EYE Humidity 3	1	Unsigned	0	100	-	%	Humidity measured by EYE sensor 3
10807	EYE Humidity 4	1	Unsigned	0	100	-	%	Humidity measured by EYE sensor 4
10808	EYE Magnet 1	1	Unsigned	0	1	-	-	Magnet measured by EYE sensor 1
10809	EYE Magnet 2	1	Unsigned	0	1	-	-	Magnet measured by EYE sensor 2
10810	EYE Magnet 3	1	Unsigned	0	1	-	-	Magnet measured by EYE sensor 3
10811	EYE Magnet 4	1	Unsigned	0	1	-	-	Magnet measured by EYE sensor 4
10812	EYE Movement 1	1	Unsigned	0	1	-	-	Movement state and count measured by EYE sensor 1
10813	EYE Movement 2	1	Unsigned	0	1	-	-	Movement state and count measured by EYE sensor 2
10814	EYE Movement 3	1	Unsigned	0	1	-	-	Movement state and count measured by EYE sensor 3
10815	EYE Movement 4	1	Unsigned	0	1	-	-	Movement state and count measured by EYE sensor 4
10816	EYE Pitch 1	1	signed	-90	90	-	-	Pitch and Roll angles measured by EYE sensor 1
10817	EYE Pitch 2	1	signed	-90	90	-	-	Pitch and Roll angles measured by EYE sensor 2
10818	EYE Pitch 3	1	signed	-90	90	-	-	Pitch and Roll angles measured by EYE sensor 3
10819	EYE Pitch 4	1	signed	-90	90	-	-	Pitch and Roll angles measured by EYE sensor 4
10820	EYE Low Battery 1	1	Unsigned	0	1	-	-	Low Battery indication EYE sensor 1
10821	EYE Low Battery 2	1	Unsigned	0	1	-	-	Low Battery indication EYE sensor 2
10822	EYE Low Battery 3	1	Unsigned	0	1	-	-	Low Battery indication EYE sensor 3
10823	EYE Low Battery 4	1	Unsigned	0	1	-	-	Low Battery indication EYE sensor 4
10824	EYE Battery Voltage 1	2	Unsigned	0	65535	-	-	Battery Voltage of EYE sensor 1
10825	EYE Battery Voltage 2	2	Unsigned	0	65535	-	-	Battery Voltage of EYE sensor 2
10826	EYE Battery Voltage 3	2	Unsigned	0	65535	-	-	Battery Voltage of EYE sensor 3
10827	EYE Battery Voltage 4	2	Unsigned	0	65535	-	-	Battery Voltage of EYE sensor 4
10832	EYE Roll 1	2	signed	-180	180	-	-	Roll value of EYE Sensor 1
10833	EYE Roll 2	2	signed	-180	180	-	-	Roll value of EYE Sensor 2
10834	EYE Roll 3	2	signed	-180	180	-	-	Roll value of EYE Sensor 3
10835	EYE Roll 4	2	signed	-180	180	-	-	Roll value of EYE Sensor 4
10836	EYE Movement Count 1	2	unsigned	0	65535	-	-	Movement count value of EYE Sensor 1
10837	EYE Movement Count 2	2	unsigned	0	65535	-	-	Movement count value of EYE Sensor 2
10838	EYE Movement Count 3	2	unsigned	0	65535	-	-	Movement count value of EYE Sensor 3
10839	EYE Movement Count 4	2	unsigned	0	65535	-	-	Movement count value of EYE Sensor 4

Eye sensor parameters have error code values, which will written to the I/O value if parameter data is not received. From the error code value, it is possible to distinguish whether the issue is on the FM tracker side or the EYE Sensor. Below is a table describing these values.

Eye Sensor Error Values
Parameter	Data length (bytes)	Data type	Error codes		Additional Notes
Parameter	Data length (bytes)	Data type	Data Not Received by FM tracker	EYE Sensor indicates error
Temperature	2	signed	25000	25001
Humidity	1	unsigned	250	251
Magnet	1	unsigned	250	251
Magnet trigger count	2	unsigned	65000	65001	Only available with evaluation firmware BTSX.1.2.8.magcounter.R.0 of EYE Devices
Movement	1	unsigned	250	251
Movement counter	2	unsigned	65000	65001
Pitch	1	signed	120	121
Roll	2	signed	250	251
Low battery status	1	unsigned	250	251
Battery voltage	1	unsigned	250	251

Note: If you are using presets(firmware/configurator without EYE product support), then refer to BLE Sensors I/O elements table instead.

EYE Sensor Protocol overview

Sensor advertising

Beacon and sensors data

Protocol description

At the highest-level Bluetooth® LE advertising packet consists of Advertising Indication and Scan Response. Both packets can be maximum of 31 bytes in size. Advertising Indication packet is always broadcasted when Scan Response is broadcasted only if Observer device requests it by using Active Scan.

BTSMP1 uses Advertising Indication to send beacon data which can be configured to select between iBeacon and Eddystone protocols or to be disabled at all. In that case, data which is shown as Scan Response in protocol overview will be sent as Advertising Indication without Scan Response following it.

Scan Response is used to send device name and manufacturer specific data. Manufacturer specific data includes Teltonika Company ID (0x089A) and protocol version (0x01). It is followed by Flag Encoded Data (Table 1) and Extended Data (Table 2). Later on, protocol will be highly configurable in and will allow to disable/enable sending of device name or any sensor value allowing to reduce size of the packet being sent.

Teltonika BTSX devices are transmitting one or two packets depending on the selected protocol. Broadcast packet + Scan response packet.

A scan response packet is sent when an active scan is used, within the BLE layer of communication. The default for our FM devices and many other applications for example our EYE Appication or nRF connect Application is an active scan.

There are three protocols, with the following packets:

1.iBeacon + EYE Sensors

2.Eddystone + EYE Sensors

For iBeacon + EYE Sensors and Eddystone + EYE Sensors protocols only iBeacon/Eddystone packet is broadcasted and will be seen by both active and passive scans, to see the EYE Sensors packet you need to use an active scan. In other words in an environment where no BLE devices are scanning with an active scan or in case when there are no scanning devices at all, only the iBeacon/Eddystone packet will be sent by the BTS device to conserve energy.

3. EYE Sensors

With EYE Sensors protocol, the EYE Sensor packet becomes broadcast. In other words, in an environment where no BLE devices are scanning with an active scan or in case when there are no scanning devices at all EYE Sensors packet will be sent by the BTS device.

More Information on Active vs passive scans

Device Name has the following default value for Beacon – ID1_XXXXXXX

**Table 1. Flag Encoded Date**
Data	Size (Bytes)	Description
Flags	1	Each set bit (0-7) means the presence of value (0-7). Bits: 0 – Temperature value presence 1 – Humidity value presence 2 – Magnetic sensor presence 3 – Magnetic sensor state (1 magnetic field is detected/0 magnetic field is not detected) Valid value is present only if bit 2 flag is set. 4 – Movement sensor counter 5 – Movement sensor angle 6 – Low Battery indication (if set to 1 low battery voltage detected) 7 – Battery voltage value presence
Value 0	2	Temperature Value in Celsius / 100 NOTE: present only if bit 0 is set, otherwise is not being sent
Value 1	1	Humidity Value in percent NOTE: present only if bit 1 is set, otherwise is not being sent
Value 2	2	Movement Sensor counter Most significant bit indicates movement state and 15 least significant bits represent count of movement events. NOTE: present only if bit 4 is set, otherwise is not being sent
Value 3	3	Movement sensor angle Most significant byte – pitch (-90/+90) Two least significant bytes – roll (-180/+180) NOTE: present only if bit 5 is set, otherwise is not being sent
Value 4	1	Battery Voltage Battery voltage in mV = 2000 + VALUE * 10 NOTE: present only if bit 7 is set, otherwise is not being sent

GATT Characteristics

Name	Service UUID	Characteristic UUID	Data Type	Min	Max	Default Value	Notes
Device Name	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0016-7df2-4d4e-8e6d-c611745b92e9	ASCII	0	12	Unique for each device	-
Tx Power Lever	1804	2a07	SINT8	-14	8	2	Possible values: -14, -11, -8, -5, -2, 2, 4, 8
Protocol Type	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0001-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	4* *Max 2 with 01.02.10+ firmware	1 for EYE_Beacon, 4 for EYE_Sensor* *with 01.02.10+ firmware 1 for both EYE_Beacon & EYE_Sensor	0 - iBeacon 1 - Eddystone 2 - EYE Sensor 3 - iBeacon + EYE Sensor* 4 - Eddystone + EYE Sensor* 01.02.10+ sensors are enabled over Activate / Deactivate Sensors*
Activate / Deactivate Sensors* *from 01.02.10+ firmware	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0021-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	15 (0b1111)	4 (0b0100) for EYE_Beacon, 15 (0b1111) for EYE_Sensor	(LSb) bit 0 – Temperature Bit 1 – Humidity Bit 2 – Magnetic Bit 3 - Movement E.g. EYE_Sensor disabled movement & enabled temperature, humidity, magnetic sensors 7 (0b0111)
Advertising Interval	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0002-7df2-4d4e-8e6d-c611745b92e9	UINT16	1000	10000	5000	miliseconds
Sub Advertising Interval	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0003-7df2-4d4e-8e6d-c611745b92e9	UINT16	20	1000	100	Used by repeats, miliseconds
Advertising Repeats	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0004-7df2-4d4e-8e6d-c611745b92e9	UINT16	1	10	1	Repeats work only if Advertising Interval is more than 2000 ms and Repeats set to more than 1
iBeacon ID	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0005-7df2-4d4e-8e6d-c611745b92e9	BYTE ARRAY	20 bytes	20 bytes	Unique for each device	16 B - UUID 2 B - major 2 B - minor
Eddystone ID	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0006-7df2-4d4e-8e6d-c611745b92e9	BYTE ARRAY	16 bytes	16 bytes	Unique for each device	10 B - Namespace 6 B - Instance
Command	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0007-7df2-4d4e-8e6d-c611745b92e9	Command characteristic
Password	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0008-7df2-4d4e-8e6d-c611745b92e9	BYTE ARRAY	6 bytes	6 bytes	123456	Always 6 Digits
Sensor Interval	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0009-7df2-4d4e-8e6d-c611745b92e9	UINT16	0	10000	1000	miliseconds
Event Interval	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c000a-7df2-4d4e-8e6d-c611745b92e9	UINT16	0	10000	1000	miliseconds
Event Duration	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c000b-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	30	30	seconds
Temperature Event	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c000c-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	2	2	0 - on entrance 1 - on exit 2 - no event
Temperature Low	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c000d-7df2-4d4e-8e6d-c611745b92e9	INT8	-40	85	-20	celsius
Temperature High	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c000e-7df2-4d4e-8e6d-c611745b92e9	INT8	-40	85	50	celsius
Humidity Event	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c000f-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	2	2	0 - on entrance 1 - on exit 2 - no event
Humidity Low	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0010-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	100	15	%
Humidity High	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0011-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	100	50	%
Movement Event	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0012-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	2	2	0 - on entrance 1 - on exit 2 - no event
Movement Start	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0013-7df2-4d4e-8e6d-c611745b92e9	UINT16	0	300	5	seconds
Movement Stop	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0014-7df2-4d4e-8e6d-c611745b92e9	UINT16	0	300	5	seconds
Magnetic Event	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0015-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	2	2	0 - on entrance 1 - on exit 2 - no event
Password Counter	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0019-7df2-4d4e-8e6d-c611745b92e9	UINT8	0 (counter)	10 (counter)	0	Byte 0 – counter, Byte 1 and 2 - timeout
Master Password (PUK)	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0020-7df2-4d4e-8e6d-c611745b92e9	UINT8	8 bytes	8 bytes	MAC address dependency	Byte array
Manufacturer sleep (Hibernate mode)	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0018-7df2-4d4e-8e6d-c611745b92e9	UINT8	0	1	1	0 – sleep disabled, 1 – sleep enabled
User ADV Spam Duration	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0022-7df2-4d4e-8e6d-c611745b92e9	UINT16	1	300	30	WakeUp Advertising Spam Duration in seconds
RSSI Calibration Value	e61c0000-7df2-4d4e-8e6d-c611745b92e9	e61c0023-7df2-4d4e-8e6d-c611745b92e9	INT8	-100	127	127	RSSI value in dBm 127 – Use default calib. table
Manufacturer	180A	2A29	BYTE ARRAY	-	-	Not Configurable	Read Only. Ex. "Teltonika"
Model	180A	2A24	BYTE ARRAY	-	-	Not Configurable	Read Only. Ex. "BTSID1"
Serial	180A	2A25	BYTE ARRAY	-	-	Not Configurable	Not used
Hardware	180A	2A27	BYTE ARRAY	-	-	Not Configurable	Read Only. Ex. "Table:1 Volt:325
Firmware	180A	2A26	BYTE ARRAY	-	-	Not Configurable	Read Only. Ex. "1.1.0-beta"
System ID	180A	2A23	BYTE ARRAY	-	-	Not Configurable	Not used
MAC	180A	652143dc-dec6-4fb1-bd46-3e919d2410a6	BYTE ARRAY	6	6	Not Configurable	Read Only. ex. 112233445566 -> 11:22:33:44:55:66
Scan Response Data	e61c0000-7df3-4d4e-8e6d-c611745b92e9	e61c0001-7df3-4d4e-8e6d-c611745b92e9	BYTE ARRAY	17	17	Not Configurable	Scan Response Data, see picture for detail view of data structure

Command characteristic

Command's name	Data to send	Description
Write to flash	0x0010	Writes set parameters to flash
General boot	0x0011	Enter boot mode
Instant reset	0x0012	Software reset
Reset after connection	0x0013	Reset after disconnect
Get hw voltage	0x0014	Sets detected hw voltage in response data
Keep connection alive	0x0015	Resets disconnect timer
Restore defaults	0x0016	Sets all configurable parameters to default values

EYE Sensor Bluetooth® frame parsing example


Unparsed data
0201061AFF4C000215FFFFFFFF0B8C404510C655AAB636EBEFBB700055020C094D50315F313233343536370EFF9A0801B708B4120CCB0BFFC767


Parsed data
Parameter		HEX Code Part	Actual Value
	Length	02
	Type	01
	Flags	06
	Length	1A
	Type	FF
	Apple company identifier (big endian)	4C00
	Beacon type	0215
	UUID	FFFFFFFF0B8C404510C655AAB636EBEF
	Major	BB70
	Minor	0055
	Power	02
	Length	0C
	Type	09
	Device name	4D50315F31323334353637
	Length	0E
	Type	FF
	Teltonika company ID (big endian)	9A08
	Protocol version	01
	Flags	B7	Raw value example 0xB7. Data has to be interpretated as binary value. In this example would be (MSB)1011 0111(LSB) and is parsed from least significant byte(LSB). 0 – Temperature value presence. 1 Means device is reading and transmitting temperature value. 1 – Humidity value presence. 1 Means device is reading and transmitting humidity value. 2 – Magnetic sensor presence. 1 Means device is reading and transmitting Magnetic sensor value. 3 – Magnetic sensor state (1 magnetic field is detected/0 magnetic field is not detected) Valid value is present only if bit 2 flag is set. 4 – Movement sensor counter. 1 Means device is reading and transmitting movement state and count values. 5 – Movement sensor angle. 1 Means device is reading and transmitting angle roll and pitch values. 6 – Low Battery indication. 0 – Means device battery is from 100 to 15 % (When value changes to 1 Battery level is lower than 15 %. 7 – Battery voltage value presence. 1 Means device is reading and transmitting battery voltage value.
	Temperature	08B4	Raw value example 0x08B4 hex, 2228 dec. Raw value needs to be divided by 100. Real temperature is 22,28 Celsius.
	Humidity	12	Raw value example 0x12 hex, 18 dec. Decimal value is humidity in percent. Humidity 18 %
	Movement	0CCB	(MSB)0000 1100 1100 1011(LSB) binary 0 - Most significant byte(MSB) represents Movement status. In this case device is not moving 0. If it was 1 device is moving. 000 1100 1100 1011 – represent detected movements count 3275 decimal value means device has detected total 3275 movement events,
	Angle	0BFFC7	0B – Most significant byte represents device pitch. Device pitch can be from -90 to 90 degrees. In this example device pitch is 0000 1011 (2's complement) = 11° degrees. FFC7– Two least significant bytes represent device roll. Device roll can be from -180 to 180 degrees. In this example device Roll is 1111 1111 1100 0111 (2's complement) = -57° degrees
	Battery voltage	67	Battery voltage – raw value example 0x67 hex. Decimal value of parameter 103. To calculate battery voltage need to use calculation 2000 + (VALUE * 10). In this case battery voltage value 2000+(103x10)= 3030 mV

FM Packet parsing example (Base firmware / Advanced mode)


Unparsed data
Received data in hexadecimal stream: `00000000000000488E010000017CA6B6BFD8010F0E5188209AB482008600A80F0000000` `00006000000020019090400560024000301CF0000001601D00000FF4D01D10000006D00000001014B0001B6010000CF7D`

AVL Data Packet
AVL Data Packet Part		HEX Code Part
	Zero Bytes	00 00 00 00
	Data Field Length	00 00 00 48
	Codec ID	8E (Codec8 Extended)
	Number of Data 1 (Number of Total Records)	01
AVL Data	Timestamp	00 00 01 7C A6 B6 BF D8 (GMT: Friday, 22 October 2021 06:36:07)
	Priority	01
	Longitude	0F 0E 51 88
	Latitude	20 9A B4 82
	Altitude	00 86
	Angle	00 0A
	Satellites	0E
	Speed	00 00
	Event IO ID	00 00
	N of Total ID	00 06
	N1 of One Byte IO	00 00
	N2 of Two Bytes IO	00 02
	ID	00 19 (25 = BLE Temperature #1)
	Value	09 04 (2308=23.08°C)
	ID	00 56 (86 = BLE Humidity #1)
	Value	00 36 (24 %RHT)
	N4 of Four Bytes IO	00 03
	ID	01 CF (463 - BLE 1 Custom #2 = Movement status and movement events count)
	Value	00 00 00 16 (Currently not moving events count 22)
	ID	01 D0 (464 - BLE 1 Custom #3 = Angle )
	Value	00 00 FF 4D (Pitch = 0°, Roll = -179°)
	ID	01 D1 (465 - BLE 1 Custom #4 = Battery Voltage)
	Value	00 00 00 6D (109 = 2000 + 109 * 10 mV = 3090 mV)
	N8 of Eight Bytes IO	00 00
	NX of X Bytes IO	00 01
	N’th IO ID - AVL ID.	01 4B (331 - BLE 1 Custom #1 = Flags)
	Length of Variable Length IO	00 01
	Value of Variable Length IO	B7 = (MSB)11011 0111(LSB) It's parsed from least significant byte(LSB): Bit 0 – Temperature value presence. 1 Means device is reading and transmitting temperature value. Bit 1 – Humidity value presence. 1 Means device is reading and transmitting humidity value. Bit 2 – Magnetic sensor presence. 1 Means device is reading and transmitting Magnetic sensor value. Bit 3 – Magnetic sensor state 1 magnetic field is detected/0 magnetic field is not detected) Valid value is present only if bit 2 flag is set. Bit 4 – Movement sensor counter. 1 Means device is reading and transmitting movement state and count values. Bit 5 – Movement sensor angle. 1 Means device is reading and transmitting angle roll and pitch values. Bit 6 – Low Battery indication. 0 – Means device battery is from 100 to 15 % (When value changes to 1 Battery level is lower than 15 %. 7 – Battery voltage value presence. 1 Means device is reading and transmitting battery voltage value.
	Number of Data 2 (Number of Total Records)	01
	CRC-16	00 00 CF 7D

FM EYE Sensor record parsing example with the new firmware (Evaluation firmware / EYE Sensor filtering by name)

Parsing EYE Sensor records example
Below You will find an example on how to parse EYE Sensor record with two EYE Sensors present.


Unparsed data
Received data in hexadecimal stream: `00000000000000908E0100000183407a2beb000f0e3fe3209ab40e008801290d00002c350001000000000` `000000000012c3500630130050f4d50315f42453241413500000000000602d60807012f0801000901000a024e000b01f90c025aff0d01000e020bcc` `30050f4d50315f33464539414100000000000602cb080701300801000901000a0263000b01000c02af000d01000e020b90010000fef4`


AVL Data Packet
AVL Data Packet Part		HEX Code Part
	Zero Bytes	00 00 00 00
	Data Field Length	00 00 00 90
	Codec ID	8E (Codec8 Extended)
	Number of Data 1 (Number of Total Records)	01
AVL Data	Timestamp	00 00 01 83 40 7a 2b eb(GMT: Tuesday, 18 June 2019 08:25:22.001)
	Priority	00
	Longitude	0f 0e 3f e3
	Latitude	20 9a b4 0e
	Altitude	00 88
	Angle	01 29
	Satellites	0d
	Speed	00 00
	Event IO ID	2c 35 (11317)
	N of Total ID	00 01
	N1 of One Byte IO	00 00
	N2 of Two Bytes IO	00 00
	N4 of Four Bytes IO	00 00
	N8 of Eight Bytes IO	00 00
	NX of X Bytes IO	00 01
	N’th IO ID - AVL ID.	2c 35 (11317)
	Length of Variable Length IO	00 63 (99 bytes)
	Value of Variable Length IO 11317	0130050f4d50315f42453241413500000000000602d60807012f0801000901000a024e000b01f90c025aff0d01000e020bcc 30050f4d50315f33464539414100000000000602cb080701300801000901000a0263000b01000c02af000d01000e020b90
	Number of Data 2 (Number of Total Records)	01
	CRC-16	00 00 fe f4

Parsing AVL ID 11317 data


AVL ID 11317 Unparsed data
`0130050f4d50315f42453241413500000000000602d60807012f0801000901000a024e000b01f90c025aff0d01000e020bcc` `30050f4d50315f33464539414100000000000602cb080701300801000901000a0263000b01000c02af000d01000e020b90`


Parsing the data
AVL Data packet part		HEX Code Part
	Constant	01
	Eye Sensor #1 data length	30 (48 bytes)
	Parameter ID	05 (Eye Sensor Device name)
AVL Data	Parameter data length	0f (15 bytes)
	Parameter data	4d 50 31 5f 42 45 32 41 41 35 00 00 00 00 00
	Parameter ID	06 (Eye Sensor #1 temperature)
	Parameter data length	02 (2 bytes)
	Parameter data	d6 08 (With firmware 03.28.04.rev.203 the value is little endian, converted to decimal and multiplied by 0.01C = 22.42C. With firmware 03.28.04.rev.204 the value is big endian)
	Parameter ID	07 (Eye Sensor #1 Humidity)
	Parameter data length	01 (1 byte)
	Parameter data	2f (converted to decimal = 47%)
	Parameter ID	08 (Eye Sensor #1 Magnet)
	Parameter data length	01 (1 byte)
	Parameter Data	00 (no magnet detected)
	Parameter ID	09 (EYE Sensor #1 Movement presence)
	Parameter data length	01 (1 byte)
	Parameter data	00 (none detected)
	Parameter ID	0a (parameter ID #10, EYE Sensor #1 Movement count)
	Parameter Data length	02 (2 bytes)
	Parameter data	4e 00 (converted to dec = 19968)
	Parameter ID	0b (Parameter ID #11 Eye Sensor #1 Pitch)
	Parameter Data length	01 (1 byte)
	Parameter data	f9 (converted to decimal = 159 degrees)
	Parameter ID	0c (Parameter ID #12 Eye sensor #1 Roll)
	Parameter data length	02 (2 bytes)
	Parameter data	5a ff (With firmware 03.28.04.rev.203 the value is Little endian, converted to decimal signed 2's complement =-166 degrees With firmware 03.28.04.rev.204 the value is Big Endian)
	Parameter ID	0d (parameter ID #13 low battery voltage indicator)
	Parameter data length	01 (1 byte)
	Parameter data	00 (low battery voltage not detected)
	Parameter ID	0e (Eye Sensor #1 battery voltage)
	Parameter data length	02 (2 bytes)
	Parameter data	0b cc (Converted to decimal = 3020 mV)
	Eye Sensor #2 data length	30 (48 bytes)
	Parameter ID	05 (Eye Sensor Device name)
	Parameter data length	0f (15 bytes)
	Parameter Data	09 (EYE Sensor #1 Movement presence)
	Parameter ID	06 (Eye Sensor #1 temperature)
	Parameter data length	02 (2 bytes)
	Parameter Data	cb 08 (little endian, converted to decimal and multiplied by 0.01C = 22.51C)
	Parameter ID	07 (Eye Sensor #1 Humidity)
	Parameter data length	01 (1 byte)
	Parameter Data	30 (converted to decimal = 48%)
	Parameter ID	08 (Eye Sensor #1 Magnet)
	Parameter data length	01 (1 byte)
	Parameter Data	00 (no magnet presence detected)
	Parameter ID	09 (EYE Sensor #1 Movement presence)
	Parameter data length	01 (1 byte)
	Parameter Data	00 (no movement presence detected)
	Parameter ID	0a (parameter ID #10, EYE Sensor #1 Movement count)
	Parameter data length	02 (2 bytes)
	Parameter Data	63 00 (converted to decimal = 25344)
	Parameter ID	0b (Parameter ID #11 Eye Sensor #1 Pitch)
	Parameter data length	01 (1 byte)
	Parameter Data	00 (converted to dec = 0 degrees)
	Parameter ID	0c (Parameter ID #12 Eye sensor #1 Roll)
	Parameter data length	02 (2 bytes)
	Parameter Data	af 00 (Little endian, converted to decimal signed 2's complement =175 degrees)
	Parameter ID	0d (parameter ID #13 low battery voltage indicator)
	Parameter data length	01 (1 byte)
	Parameter Data	00 (low battery voltage not detected)
	Parameter ID	0e (Eye Sensor #1 battery voltage)
	Parameter data length	02 (2 bytes)
	Parameter Data	0b 90 (Converted to decimal = 2960mV)

Safety information

This message contains information on how to operate BTSID1 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device!

1. To avoid mechanical damage, it is advised to transport the device in an impact-proof package.

2. In case of malfunction contact your Teltonika account manager or write to the technical support team over the Helpdesk.

Certification & Approvals


Certificates	Links
E-Mark (EU)	Yes
FCC (USA)	Yes
CE/RED (EU)	Yes
RoHS (EU)	Yes
REACH (EU)	Yes
Anatel (EU) (PR)	Yes
IP rating	Yes
SIRIM QAS	Yes
SDPPI POSTEL	Yes
TELEC	Yes
ATEX	Yes
EN12830	Yes

Nomenclature & Classification codes


Name	Links
EAN	Yes
HS	Yes

Memberships


Name	Links
Bluetooth® SIG	Yes
WEEE	Yes

External Links

Product Page

https://teltonika-gps.com/eye/

Product Change Notifications

The latest Product Change Notifications can be found: Product Change Notifications

Software Errata

Firmware Errata: BTS firmware errata

EYE App Errata: BTS APP errata

Promotional Material

EYE Sensor Promotional Material

Compatibilty with other Teltonika Devices

Teltonika Networks: https://wiki.teltonika-networks.com/view/Bluetooth_EYE_Sensor_and_EYE_Beacon_support

Partner Providers Supporting Software

Frequently asked questions (FAQ)

Documents

Datasheet PDF (EN)

(Updated on: 2024-03-15)

BTSMP1 Quick Manual (EN)

(Updated on: 2024-01-17)

North America Flyer

(Updated on: 2023-03-13)

@@ Line 1: / Line 1: @@
 __TOC__
-==<p style="font-size:32px><span style="color:#0054A6">Introduction</span></p>==
+==<p style="font-size:32px"><span style="color:#0054A6">Introduction</span></p>==
-Wireless solutions open up new horizons for your business and help to keep an eye on your assets. Discover our brand-new and certified Bluetooth Low Energy ID sensor model from Teltonika with robust waterproof casing and a long-lifetime battery. The model is designed for a low-cost fast and easy configuration and integration to save precious time, resources, and ensure accountability.
+Wireless solutions open up new horizons for your business and help to keep an eye on your assets. Discover our brand-new and certified Bluetooth® Low Energy ID sensor model from Teltonika with robust waterproof casing and a long-lifetime battery. The model is designed for a low-cost fast and easy configuration and integration to save precious time, resources, and ensure accountability.
-[[File:BTSMP1.png|center|frameless|1157x1157px]]
+[[File:BTSMP1-datasheet-2023-12-18.2.png|center|frameless|1157x1157px]]
 ==<p style="font-size:32px><span style="color:#0054A6">About BTSMP1</span></p>==
@@ Line 58: / Line 58: @@
 ! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |
 |-
-| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Bluetooth
+| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Bluetooth®
-| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Bluetooth 4.2 compliant,
+| style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Bluetooth® 4.2 compliant,
-Bluetooth 5.2 certified
+Bluetooth® 5.2 certified
 |-
 | style="width:10%;border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Range
@@ Line 114: / Line 114: @@
 ===<p style="font-size:24px><span style="color:#0054A6">Dimensions</span>===
 [[File:Eye dimensions.png]]
+==<p style="font-size:32px><span style="color:#0054A6">Value-adding Features</span></p>==
+===<p style="font-size:24px"><span style="color:#0054A6">Hibernate mode</span>===
+Hibernated mode means that the EYE device is OFF when shipping from the factory, preserving battery life.
+PLEASE NOTE that EYE devices are available in two modes: factory-activated (ON) or Hibernated (OFF). You may order the device version which better suits your needs. Order codes are described on [https://teltonika-gps.com/products/accessories/sensors-beacons/eye eye page]
+====<p style="font-size:24px"><span style="color:#0054A6">Value of hibernate mode</span>====
+Hibernated versions of EYE devices simplify stock management for our partners while maximizing battery life. <br>1. '''Accelerated delivery times:'''
+By stocking up on hibernated EYE devices, you ensure readiness to deploy EYE devices with full battery capacity at any moment. This proactive approach provides fastest possible service, increases your reputation for efficiency and positions you as an industry frontrunner, enhancing your competitive edge.
+. '''Mitigated project risks:'''
+In scenarios where projects encounter unforeseen challenges, our hibernated EYE devices offer a buffer. Hibernate feature allows to safeguard your investments and potential revenue streams. This means that even if projects encounter delays or complications, you can still deploy EYE devices with full battery capacity, ensuring optimal performance when the time is right.
+====<p style="font-size:24px"><span style="color:#0054A6">How to activate hibernated eye device?</span>====
+Attach any magnet to sleeping device and wait for LED to blink.
+<br>'''NOTE: ANY MAGNET CAN BE USED'''
+<br>[[File:520746 Magnet EYE gif v1.6-min.gif|frameless|684x684px]]
+<br>Now device is discoverable, scannable, connectable via BLE.
+====<p style="font-size:24px"><span style="color:#0054A6">How to send the device to hibernate mode?</span>====
+If you want to put the EYE device back to hibernate mode after accidental activation or simply pause its use, you may do that following steps below:
+<br>Step 1. While connected and in overview tap "Send device to sleep":
+<br>Step 2. Confirm your selection:
+<br>Step 3. Wait for EYE App to disconnect:
+<br>[[File:Device screen 1.2.8 2.jpg|400x400px]][[File:Screenshot 20230509 173323 EYE APP.jpg|400x400px]][[File:Screenshot 20230512 164509 Gallery.jpg|400x400px]]
+====<p style="font-size:24px"><span style="color:#0054A6">Can All devices hibernate?</span>====
+. All EYE Sensors with firmware version starting from 1.2.9.R.8 can hibernate.
+. Only new EYE Beacons bought with order codes that have hardware modification can hibernate standard codes are available in [https://teltonika-gps.com/products/accessories/sensors-beacons/eye eye page], for special order codes consult your sales manager.
 ==<p style="font-size:32px><span style="color:#0054A6">Mounting recomendations</span></p>==
@@ Line 134: / Line 172: @@
 {|
 |- align="TOP"
+|[[File:1.1.jpg|537x537px]]
 |
-|[[File:Detailed_list_-_collapsed.png|border|360x640px|none]]
 |
-|[[File:Overview - without update (sensor).png|border|360x640px|none]]
 |
-|[[File:Basic settings.png|right|border|360x640px]]
+|[[File:2.1.jpg|537x537px]]
 |
-|[[File:Advanced settings.png|right|border|360x640px]]
+|
+|
+|[[File:Correct1.1.png|530x537px]]
+|
+|
+|
+|[[File:4.1.jpg|537x537px]]
 |}
@@ Line 148: / Line 191: @@
 ==== [[File:Group 125.png|baseline|frameless|upright=0.2|link=|alt=]]Overview window ====
-In overview window you can see device details, check firmware version and update if available , go to device configuration settings. If you select to Configure device new window will open with Basic and Advanced settings.
+In overview window you can see device details, check firmware version and update if available, go to device configuration settings and download the configuration. If you select to Configure device new window will open with Basic and Advanced settings. Other actions include changing the device PIN code and putting the device to sleep. A device in sleep mode will no longer be findable or connectable via the app. To wake it up, you need to attach a magnet and look for a green LED flashing.
 <br>
@@ Line 165: / Line 209: @@
 =====<p style="font-size:16px><span style="color:#0054A6">Advanced configuration: Sensor reading and events<span>=====
-<br>
+ '''!NOTE:''' These settings are no longer available after EYE APP 1.2.0-60 update.
 {|
 |- style="vertical-align: top;"
@@ Line 191: / Line 235: @@
 ===<p style="font-size:24px"><span style="color:#0054A6">Teltonika configurator (Base firmware / advanced mode)</span>===
-If you have firmware / configurator which does not support EYE sensor tab in Bluetooth 4.0 section, then you can still use Avanced BLE configuration to connect with EYE Sensors.
+If you have firmware / configurator which does not support EYE sensor tab in Bluetooth® 4.0 section, then you can still use Avanced BLE configuration to connect with EYE Sensors.
 To configure FM with BTSMP1 EYE Sensor:
@@ Line 210: / Line 254: @@
 # In [[FMB120 System settings|System settings]] Enable [[Codec#Codec%208%20Extended|Codec8 Extended]];
 # In [[FMB120 GPRS settings|GPRS settings]] Configure [[FMB120 GPRS settings#GPRS%20Settings%20and%20Server%20Settings|GPRS Settings and Server Settings]]
-# In [[FMB120 Bluetooth settings|Bluetooth]] settings Enable Bluetooth, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth will be disabled;
+# In [[FMB120 Bluetooth® settings|Bluetooth®]] settings Enable Bluetooth®, set this setting as either "Enable (hidden)" or "Enable (visible)", otherwise Bluetooth® will be disabled;
-# In [[FMB120 Bluetooth 4.0 settings|Bluetooth 4.0]] settings:
+# In [[FMB120 Bluetooth® 4.0 settings|Bluetooth® 4.0]] settings:
 ## set Non Stop Scan to "Disable", configure "Update Frequency" and "Scan duration" as 30 seconds. These settings will bring the best results for BLE scanning with our device;
-## In [[FMB120 Bluetooth 4.0 settings#Advanced%20Mode|Bluetooth 4.0 settings Advanced Mode Settings]] Load EYE Sensor preset according to packet settings in EYE app(if you do not have preset you can download them from below table)
+## In [[FMB120 Bluetooth® 4.0 settings#Advanced%20Mode|Bluetooth® 4.0 settings Advanced Mode Settings]] Load EYE Sensor preset according to packet settings in EYE app(if you do not have preset you can download them from below table)
 ## Configure MAC address of the sensor
 # To receive data to server enable corresponding IO elements in [[FMB120 I/O settings#Priority|FMB120 I/O settings]]
@@ Line 251: / Line 295: @@
 '''Preset Configuration:'''
-If EYE Sensor Packet Settings is EYE Sensors or Eddystone and EYE Sensors:<br>[[File:Eddystone and eye.png|frameless|1152x1152px]]
+If EYE Sensor Packet Settings is EYE Sensors or Eddystone and EYE Sensors:<br>[[File:Preset2EYE.png|frameless|1152x1152px]]
 <br>If EYE Sensor Packet Settings is EYE Sensors or iBeacon and EYE Sensors:
-[[File:Ibeacon and eye.png|frameless|1152x1152px]]
+[[File:Preset1EYE.png|frameless|1152x1152px]]
 '''IO element value descriptions:'''
@@ Line 264: / Line 310: @@
 |-
 | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Custom1
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Flags(not supported with curent FMX640 preset)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Flags (not supported with current FMX640 preset)
 |-
 | style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Temperature
@@ Line 633: / Line 679: @@
 ===<p style="font-size:24px"><span style="color:#0054A6">Teltonika configurator new functionalities (Evaluation firmware / EYE Sensor filtering by name)</span>===
-Starting with firmware 03.28.04.Rev.207 there is additional tabs available in Bluetooth 4.0 section that allow for easier configuration to connect FM and EYE sensor or beacon.
+Starting with firmware <b>03.28.04.Rev.207</b> there is additional tabs available in Bluetooth® 4.0 section that allow for easier configuration to connect FM and EYE sensor or beacon.
 '''It's now possible to connect up to 100 sensors at once just by entering one name in the configurator name list.''' It's required to enter at least 3 characters(case sensitive) in the name for FM to scan the sensors. Super easy to set up!
@@ Line 642: / Line 688: @@
 With this option, you can upload one configuration to FOTA web and it doesn’t matter which sensor from the list end user will mount, it will be scanned and sent to the server as long as it meets the name criteria.
-'''Bluetooth 4.0'''
+'''Bluetooth® 4.0'''
 <br>
-Functionalities were reorganized and transferred to Bluetooth 4.0 configuration tab with additional horizontal tabs selection for specific settings:
+Functionalities were reorganized and transferred to Bluetooth® 4.0 configuration tab with additional horizontal tabs selection for specific settings:
 <br>
 *'''Global''' - Parameters responsible for device scanning ability like power and duratations.
@@ Line 655: / Line 701: @@
 *'''BLE Scan Duration''' - Sensors data reading time. Recommended value 30.
 *'''Scan retries until error''' - Scan retries count, till start to show the value as Error '3000' - sensor disconnected. Recommended value 30.
-*'''BT Power Level''' - Telematics device Bluetooth power level setting.
+*'''BT Power Level''' - Telematics device Bluetooth® power level setting.
 *'''BLE Broadcasting service ID''' - Telematics device can broadcast configured ID.
 *''' BLE connection control''' - Connection mode settings. If broadcasting ID is configured, parameter should be set to Prohibit.
@@ Line 666: / Line 712: @@
 <br>
 Sensor Configuration can be set to Custom Sensors, Eye Sensors or both.
-With the Custom Sensors setting enabled, [https://wiki.teltonika-gps.com/view/FMB130_Bluetooth_4.0_settings#Advanced_Mode| any BLE sensor can be configured.]<br>
+With the Custom Sensors setting enabled, [https://wiki.teltonika-gps.com/view/FMB130_Bluetooth®_4.0_settings#Advanced_Mode| any BLE sensor can be configured.]<br>
 When '''EYE Sensors''' is selected, Eye Sensor connectionless functionalities or EYE list search window will appear, depending on the selected EYE Sensor filter.
 <br>
@@ Line 767: / Line 813: @@
 |-
 !Parameter ID!!Name
-!Data type!!Description!!
+!Data type!!Description
 |-
 |5||Eye Sensor Device Name
@@ Line 816: / Line 862: @@
 |2 byte unsigned integer
 |Low battery state measured by EYE Sensor from List Values from 0 to1
+|-
+|15
+|EYE Sensor MAC adress
+|6 byte unsigned integer
+|Device's MAC adress
 |-
 |16
-|EYE Sensor Magnet trigger count
+|EYE Sensor Magnet trigger count*
 |2 byte unsigned integer
 |Magnet trigger counts measured by EYE Sensor from List Values
+<nowiki>*</nowiki>Only available with evaluation firmware BTSX.1.2.8.magcounter.R.0 of EYE Devices
 |-
 |}
@@ Line 1,035: / Line 1,087: @@
          <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Pitch 1</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">signed</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">-90</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">90</td>
@@ Line 1,045: / Line 1,097: @@
          <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Pitch 2</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">signed</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">-90</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">90</td>
@@ Line 1,055: / Line 1,107: @@
          <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Pitch 3</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">signed</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">-90</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">90</td>
@@ Line 1,065: / Line 1,117: @@
          <td style="width: 20%; text-align:center; vertical-align:middle;">EYE Pitch 4</td>
          <td style="width: 5%; text-align:center; vertical-align:middle;">1</td>
-         <td style="width: 10%; text-align:center; vertical-align:middle;">Unsigned</td>
+         <td style="width: 10%; text-align:center; vertical-align:middle;">signed</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">-90</td>
          <td style="width: 10%; text-align:center; vertical-align:middle;">90</td>
@@ Line 1,259: / Line 1,311: @@
 ! rowspan="2" |Data type
 ! colspan="2" |Error codes
+!Additional Notes
 |-
 !Data Not Received by FM tracker
 !EYE Sensor indicates error
+!
 |-
 |Temperature
@@ Line 1,268: / Line 1,322: @@
 |25000
 |25001
+|
 |-
 |Humidity
@@ Line 1,274: / Line 1,329: @@
 |250
 |251
+|
 |-
 |Magnet
@@ Line 1,280: / Line 1,336: @@
 |250
 |251
+|
 |-
 |Magnet trigger count
@@ Line 1,286: / Line 1,343: @@
 |65000
 |65001
+|Only available with evaluation firmware BTSX.1.2.8.magcounter.R.0 of EYE Devices
 |-
 |Movement
@@ Line 1,292: / Line 1,350: @@
 |250
 |251
+|
 |-
 |Movement counter
@@ Line 1,298: / Line 1,357: @@
 |65000
 |65001
+|
 |-
 |Pitch
@@ Line 1,304: / Line 1,364: @@
 |120
 |121
+|
 |-
 |Roll
@@ Line 1,310: / Line 1,371: @@
 |250
 |251
+|
 |-
 |Low battery status
@@ Line 1,316: / Line 1,378: @@
 |250
 |251
+|
 |-
 |Battery voltage
@@ Line 1,322: / Line 1,385: @@
 |250
 |251
+|
 |}
@@ Line 1,337: / Line 1,401: @@
 ===<p style="font-size:24px><span style="color:#0054A6">Protocol description</span>===
-At the highest-level Bluetooth LE advertising packet consists of Advertising Indication and Scan Response. Both packets can be maximum of 31 bytes in size. Advertising Indication packet is always broadcasted when Scan Response is broadcasted only if Observer device requests it by using Active Scan.
+At the highest-level Bluetooth® LE advertising packet consists of Advertising Indication and Scan Response. Both packets can be maximum of 31 bytes in size. Advertising Indication packet is always broadcasted when Scan Response is broadcasted only if Observer device requests it by using Active Scan.
 <br><br>
 BTSMP1 uses Advertising Indication to send beacon data which can be configured to select between iBeacon and Eddystone protocols or to be disabled at all. In that case, data which is shown as Scan Response in protocol overview will be sent as Advertising Indication without Scan Response following it.
@@ Line 1,386: / Line 1,450: @@
 |-
 |Value 0||2||Temperature
-<br>Value in Celsius * 100
+<br>Value in Celsius / 100
 <br>NOTE: present only if bit 0 is set, otherwise is not being sent
 |-
@@ Line 1,432: / Line 1,496: @@
 |-
-| Device Name || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0016-7df2-4d4e-8e6d-c611745b92e9  || ASCII || 0 || 11 || Unique for each device || -
+| Device Name || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0016-7df2-4d4e-8e6d-c611745b92e9  || ASCII || 0 || 12 || Unique for each device || -
 |-
-| Tx Power Lever || 1804 || 00002a07-0000-1000-8000-00805f9b34fb || SINT8 || -14 || 8 || 2 || Possible values: -14, -11, -8, -5, -2, 2, 4, 8
+| Tx Power Lever || 1804 || 2a07 || SINT8 || -14 || 8 || 2 || Possible values: -14, -11, -8, -5, -2, 2, 4, 8
 |-
-| Protocol Type|| e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0001-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 4 || 1 for EYE_Beacon, <br> 4 for EYE_Sensor || 0 - iBeacon <br> 1 - EddyStone <br> 2 - EYE Sensor <br> 3 - iBeacon + EYE Sensor <br> 4 - Eddsytone + EYE Sensor
+| Protocol Type|| e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0001-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 4*
-|-
+<small>*Max 2 with 01.02.10+ firmware</small>
+| 1 for EYE_Beacon, <br>4 for EYE_Sensor*
-| Advertising Interval|| e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0002-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 20 || 10000 || 1000 || miliseconds
-|-
+<small>*with 01.02.10+ firmware 1 for both EYE_Beacon & EYE_Sensor</small>
+| 0 - iBeacon <br>1 - Eddystone <br>2 - EYE Sensor <br>3 - iBeacon + EYE Sensor* <br>4 - Eddystone + EYE Sensor*
-| Sub Advertising Interval || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0003-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 20 || 1000 || 100 || Used by repeats, miliseconds
+<small>*01.02.10+ sensors are enabled over ''Activate / Deactivate Sensors''</small>
 |-
+|Activate / Deactivate Sensors*
-| Advertising Repeats || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0004-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 1 || 10 || 1 || Repeats work only if Advertising Interval is more than 2000 ms and Repeats set to more than 1
-|-
+<small>*from 01.02.10+ firmware</small>
+|e61c0000-7df2-4d4e-8e6d-c611745b92e9
+|e61c0021-7df2-4d4e-8e6d-c611745b92e9
+|UINT8
+|0
+|15
-| iBeacon ID ||  e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0005-7df2-4d4e-8e6d-c611745b92e9 || BYTE ARRAY || 20 bytes || 20 bytes || Unique for each device || 16 B - UUID<br>2 B - major<br>2 B - minor
+(0b1111)
+|4 (0b0100) for EYE_Beacon, <br>15 (0b1111) for EYE_Sensor
+|(LSb) bit 0 – Temperature
-|-
+Bit 1 – Humidity
-| Eddystone ID || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0006-7df2-4d4e-8e6d-c611745b92e9 || BYTE ARRAY || 16 bytes || 16 bytes || Unique for each device || 10 B - Namespace<br>6 B - Instance
+Bit 2 – Magnetic
-|-
+Bit 3 - Movement
-| Password || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0008-7df2-4d4e-8e6d-c611745b92e9 || BYTE ARRAY || 4 bytes ||4 bytes || 123456 || Always 6 Digits
+E.g. EYE_Sensor disabled movement & enabled temperature, humidity, magnetic sensors 7 (0b0111)
 |-
-| Sensor Interval || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0009-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 0 || 10000 || 1000 || miliseconds
+| Advertising Interval|| e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0002-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 1000 || 10000 || 5000 || miliseconds
 |-
-| Event Interval || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c000a-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 0 || 10000 || 1000 || miliseconds
+| Sub Advertising Interval || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0003-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 20 || 1000 || 100 || Used by repeats, miliseconds
 |-
-| Event Duration || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c000b-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 30 || 30 || seconds
+| Advertising Repeats || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0004-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 1 || 10 || 1 || Repeats work only if Advertising Interval is more than 2000 ms and Repeats set to more than 1
 |-
-| Temperature Event || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c000c-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 2 || 2 || 0 - on entrance<br>1 - on exit<br>2 - no event
+| iBeacon ID ||  e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0005-7df2-4d4e-8e6d-c611745b92e9 || BYTE ARRAY || 20 bytes || 20 bytes || Unique for each device || 16 B - UUID<br>2 B - major<br>2 B - minor
 |-
-| Temperature Low || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c000d-7df2-4d4e-8e6d-c611745b92e9 || INT8 || -40 || 85 || -20 || celsius
+| Eddystone ID || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0006-7df2-4d4e-8e6d-c611745b92e9 || BYTE ARRAY || 16 bytes || 16 bytes || Unique for each device || 10 B - Namespace<br>6 B - Instance
+|-
+|Command
+|e61c0000-7df2-4d4e-8e6d-c611745b92e9
+|e61c0007-7df2-4d4e-8e6d-c611745b92e9
+| colspan="5" |[[EYE SENSOR / BTSMP1#Command characteristic|Command characteristic]]
 |-
-| Temperature High || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c000e-7df2-4d4e-8e6d-c611745b92e9 || INT8 || -40 || 85 || 50 || celsius
+|Password||e61c0000-7df2-4d4e-8e6d-c611745b92e9|| e61c0008-7df2-4d4e-8e6d-c611745b92e9 ||BYTE ARRAY|| 6 bytes||6 bytes||123456||Always 6 Digits
 |-
-| Humidity Event || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c000f-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 2 || 2 || 0 - on entrance<br>1 - on exit<br>2 - no event
+|Sensor Interval||e61c0000-7df2-4d4e-8e6d-c611745b92e9|| e61c0009-7df2-4d4e-8e6d-c611745b92e9||UINT16||0||10000||1000||miliseconds
 |-
-| Humidity Low || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0010-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 100 || 15 || %
+|Event Interval||e61c0000-7df2-4d4e-8e6d-c611745b92e9|| e61c000a-7df2-4d4e-8e6d-c611745b92e9||UINT16||0||10000||1000 || miliseconds
 |-
-| Humidity High || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0011-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 100 || 50 || %
+|Event Duration||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c000b-7df2-4d4e-8e6d-c611745b92e9||UINT8||0||30 ||30||seconds
 |-
-| Movement Event || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0012-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 2 || 2 || 0 - on entrance<br>1 - on exit<br>2 - no event
+| Temperature Event||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c000c-7df2-4d4e-8e6d-c611745b92e9||UINT8 ||0||2|| 2||0 - on entrance<br>1 - on exit<br>2 - no event
 |-
-| Movement Start || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0013-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 0 || 300 || 5 || seconds
+|Temperature Low||e61c0000-7df2-4d4e-8e6d-c611745b92e9 ||e61c000d-7df2-4d4e-8e6d-c611745b92e9||INT8||-40|| 85||-20||celsius
 |-
-| Movement Stop || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0014-7df2-4d4e-8e6d-c611745b92e9 || UINT16 || 0 || 300 || 5 || seconds
+|Temperature High|| e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c000e-7df2-4d4e-8e6d-c611745b92e9||INT8||-40||85 ||50||celsius
 |-
-| Magnetic Event || e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0015-7df2-4d4e-8e6d-c611745b92e9 || UINT8 || 0 || 2 || 2 || 0 - on entrance <br> 1 - on exit <br> 2 - no event
+| Humidity Event||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c000f-7df2-4d4e-8e6d-c611745b92e9||UINT8||0||2||2||0 - on entrance<br>1 - on exit<br>2 - no event
 |-
-| Manufacturer || 180A  || 2A29  || BYTE ARRAY || - || - || Not Configurable || Read Only. Ex. "Teltonika"
+|Humidity Low||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0010-7df2-4d4e-8e6d-c611745b92e9 || UINT8||0||100||15||%
 |-
-| Model || 180A  || 2A24  || BYTE ARRAY || - || - || Not Configurable || Read Only. Ex. "BTSID1"
+|Humidity High ||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0011-7df2-4d4e-8e6d-c611745b92e9||UINT8||0||100||50||%
 |-
-| Serial || 180A  || 2A25  || BYTE ARRAY || - || - || Not Configurable || Not used
+|Movement Event||e61c0000-7df2-4d4e-8e6d-c611745b92e9 || e61c0012-7df2-4d4e-8e6d-c611745b92e9||UINT8||0||2||2||0 - on entrance<br>1 - on exit<br>2 - no event
 |-
-| Hardware || 180A  || 2A27  || BYTE ARRAY || - || - || Not Configurable || Read Only. Ex. "Table:1 Volt:325
+|Movement Start ||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0013-7df2-4d4e-8e6d-c611745b92e9|| UINT16||0||300||5||seconds
 |-
-| Firmware || 180A  || 2A26  || BYTE ARRAY || - || - || Not Configurable || Read Only. Ex. "1.1.0-beta"
+|Movement Stop||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0014-7df2-4d4e-8e6d-c611745b92e9|| UINT16||0||300||5 ||seconds
 |-
-| System ID || 180A  || 2A23  || BYTE ARRAY || - || - || Not Configurable || Not used
+|Magnetic Event||e61c0000-7df2-4d4e-8e6d-c611745b92e9||e61c0015-7df2-4d4e-8e6d-c611745b92e9||UINT8||0||2|| 2||0 - on entrance <br> 1 - on exit <br> 2 - no event
+|-
+| Password Counter
+|e61c0000-7df2-4d4e-8e6d-c611745b92e9
+| e61c0019-7df2-4d4e-8e6d-c611745b92e9
+|UINT8
+|0 (counter)
+|10 (counter)
+| 0
+|Byte 0 – counter,
+Byte 1 and 2 - timeout
 |-
+|Master Password (PUK)
-| MAC || 180A || 652143dc-dec6-4fb1-bd46-3e919d2410a6 || BYTE ARRAY || 6 || 6 || Not Configurable || Read Only. ex. 112233445566 -> 11:22:33:44:55:66
+|e61c0000-7df2-4d4e-8e6d-c611745b92e9
+|e61c0020-7df2-4d4e-8e6d-c611745b92e9
+| UINT8
+|8 bytes
+|8 bytes
+|MAC address dependency
+|Byte array
 |-
+|Manufacturer sleep (Hibernate mode)
+|e61c0000-7df2-4d4e-8e6d-c611745b92e9
+|e61c0018-7df2-4d4e-8e6d-c611745b92e9
+|UINT8
+|0
+|1
+|1
+|0 – sleep disabled,
+– sleep enabled
+|-
+|User ADV Spam Duration
+|e61c0000-7df2-4d4e-8e6d-c611745b92e9
+|e61c0022-7df2-4d4e-8e6d-c611745b92e9
+|UINT16
+|1
+|300
+|30
+|WakeUp Advertising
-| Scan Response Data || e61c0000-7df3-4d4e-8e6d-c611745b92e9 || e61c0001-7df3-4d4e-8e6d-c611745b92e9  || BYTE ARRAY || 17 || 17 || Not Configurable || Scan Response Data, see picture for detail view of data structure
+Spam Duration in seconds
+|-
-|}
+|RSSI Calibration Value
+|e61c0000-7df2-4d4e-8e6d-c611745b92e9
+|e61c0023-7df2-4d4e-8e6d-c611745b92e9
+|INT8
+|<nowiki>-100</nowiki>
+|127
+| 127
+|RSSI value in dBm
-[[File:Lentele0603.png|800px|frameless|center]]
+  – Use default calib. table
+|-
-===<p style="font-size:24px><span style="color:#0054A6">EYE Sensor Bluetooth frame parsing example</span>===
+|Manufacturer||180A||2A29||BYTE ARRAY||-||-||Not Configurable ||Read Only. Ex. "Teltonika"
-{| class="nd-othertables_2" style="width:100%;"
-|+
-! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Unparsed data
 |-
-| style="vertical-align: middle; text-align: center;" |<span style="background:#0048BA">02</span><span style="background:#B0BF1A">01</span><span style="background:#7CB9E8">06</span><span style="background:#C0E8D5">1A</span><span style="background:#B284BE">FF</span><span style="background:#72A0C1">4C00</span><span style="background:#EDEAE0">0215</span><span style="background:#C46210">FFFFFFFF0B8C404510C655AAB636EBEF</span><span style="background:#EFDECD">BB70</span><span style="background:#E52B50">0055</span><span style="background:#FFF600">02</span><span style="background:#03C03C">0C</span><span style="background:#FF3800">09</span><span style="background:#FFBF00">4D50315F31323334353637</span><span style="background:#FF7E00">0E</span><span style="background:#3DDC84">FF</span><span style="background:#008000">9A08</span><span style="background:#00FFFF">01</span><span style="background:#D0FF14">B7</span><span style="background:#00FF00">08B4</span><span style="background:#007FFF">12</span><span style="background:#F4C2C2">0CCB</span><span style="background:#BFFF00">0BFFC7</span><span style="background:#00BFFF">67</span>
-|}
+| Model|| 180A||2A24|| BYTE ARRAY|| -||-|| Not Configurable||Read Only. Ex. "BTSID1"
-<br>
-{| class="nd-othertables_2" style="width:100%;"
-|+
-! colspan="4" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Parsed data
 |-
-! colspan="2" rowspan="1" style="width:33%; vertical-align: middle; text-align: center;" |Parameter
-! rowspan="1" style="width:33%; vertical-align: middle; text-align: center;" |HEX Code Part
+|Serial||180A||2A25 ||BYTE ARRAY||-||-||Not Configurable ||Not used
-! rowspan="1" style="width:33%; vertical-align: middle; text-align: center;" |Actual Value
 |-
-| rowspan="50" style="vertical-align: middle; text-align: center;" |
-| style="vertical-align: middle; text-align: center;" |Length
+| Hardware||180A|| 2A27 ||BYTE ARRAY||-||-||Not Configurable||Read Only. Ex. "Table:1 Volt:325
-| style="vertical-align: middle; text-align: center;" |<span style="background:#0048BA">02</span>
-|
 |-
-| style="vertical-align: middle; text-align: center;" |Type
+|Firmware|| 180A ||2A26||BYTE ARRAY||-||-||Not Configurable||Read Only. Ex. "1.1.0-beta"
-| style="vertical-align: middle; text-align: center;" |<span style="background:#B0BF1A">01</span>
+|-
+| System ID ||180A||2A23||BYTE ARRAY||-||-|| Not Configurable||Not used
 |-
-| style="vertical-align: middle; text-align: center;" |Flags
-| style="vertical-align: middle; text-align: center;" |<span style="background:#7CB9E8">06</span>
+|MAC||180A||652143dc-dec6-4fb1-bd46-3e919d2410a6 || BYTE ARRAY||6||6||Not Configurable||Read Only. ex. 112233445566 -> 11:22:33:44:55:66
 |-
-| style="vertical-align: middle; text-align: center;" |Length
-| style="vertical-align: middle; text-align: center;" |<span style="background:#C0E8D5">1A</span>
+|Scan Response Data ||e61c0000-7df3-4d4e-8e6d-c611745b92e9|| e61c0001-7df3-4d4e-8e6d-c611745b92e9||BYTE ARRAY||17 || 17||Not Configurable ||Scan Response Data, see picture for detail view of data structure
+|}
+[[File:Lentele0603.png|800px|frameless|center]]
+===Command characteristic===
+{| class="wikitable" style="width: 100%; background-color: white; border-bottom: 2px solid #0054A6;"
 |-
-| style="vertical-align: middle; text-align: center;" |Type
+! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 20px;" |Command's name
-| style="vertical-align: middle; text-align: center;" |<span style="background:#B284BE">FF</span>
+! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 280px;" |Data to send
+! style="color: #0054A6; background-color: white; border-bottom: 2px solid #0054A6; width: 280px;" |Description
 |-
-| style="vertical-align: middle; text-align: center;" |Apple company identifier (big endian)
+|Write to flash||0x0010|| Writes set parameters to flash
-| style="vertical-align: middle; text-align: center;" |<span style="background:#72A0C1">4C00</span>
 |-
-| style="vertical-align: middle; text-align: center;" |Beacon type
+|General boot||0x0011||Enter boot mode
-| style="vertical-align: middle; text-align: center;" |<span style="background:#EDEAE0">0215</span>
 |-
-| style="vertical-align: middle; text-align: center;" |UUID
+|Instant reset||0x0012||Software reset
-| style="vertical-align: middle; text-align: center;" |<span style="background:#C46210">FFFFFFFF0B8C404510C655AAB636EBEF</span>
 |-
-| style="vertical-align: middle; text-align: center;" |Major
+|Reset after connection||0x0013||Reset after disconnect
-| style="vertical-align: middle; text-align: center;" |<span style="background:#EFDECD">BB70</span>
 |-
-| style="vertical-align: middle; text-align: center;" |Minor
+|Get hw voltage||0x0014||Sets detected hw voltage in response data
-| style="vertical-align: middle; text-align: center;" |<span style="background:#E52B50">0055</span>
 |-
-| style="vertical-align: middle; text-align: center;" |Power
+|Keep connection alive||0x0015|| Resets disconnect timer
-| style="vertical-align: middle; text-align: center;" |<span style="background:#FFF600">02</span>
 |-
-| style="vertical-align: middle; text-align: center;" |Length
+|Restore defaults||0x0016||Sets all configurable parameters to default values
-| style="vertical-align: middle; text-align: center;" |<span style="background:#03C03C">0C</span>
+|}
+===<p style="font-size:24px"><span style="color:#0054A6">EYE Sensor Bluetooth® frame parsing example</span>===
+{| class="nd-othertables_2" style="width:100%;"
+|+
+! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Unparsed data
 |-
-| style="vertical-align: middle; text-align: center;" |Type
+| style="vertical-align: middle; text-align: center;" |<span style="background:#0048BA">02</span><span style="background:#B0BF1A">01</span><span style="background:#7CB9E8">06</span><span style="background:#C0E8D5">1A</span><span style="background:#B284BE">FF</span><span style="background:#72A0C1">4C00</span><span style="background:#EDEAE0">0215</span><span style="background:#C46210">FFFFFFFF0B8C404510C655AAB636EBEF</span><span style="background:#EFDECD">BB70</span><span style="background:#E52B50">0055</span><span style="background:#FFF600">02</span><span style="background:#03C03C">0C</span><span style="background:#FF3800">09</span><span style="background:#FFBF00">4D50315F31323334353637</span><span style="background:#FF7E00">0E</span><span style="background:#3DDC84">FF</span><span style="background:#008000">9A08</span><span style="background:#00FFFF">01</span><span style="background:#D0FF14">B7</span><span style="background:#00FF00">08B4</span><span style="background:#007FFF">12</span><span style="background:#F4C2C2">0CCB</span><span style="background:#BFFF00">0BFFC7</span><span style="background:#00BFFF">67</span>
-| style="vertical-align: middle; text-align: center;" |<span style="background:#FF3800">09</span>
+|}
+<br>
+{| class="nd-othertables_2" style="width:100%;"
+|+
+! colspan="4" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Parsed data
 |-
-| style="vertical-align: middle; text-align: center;" |Device name
+! colspan="2" rowspan="1" style="width:33%; vertical-align: middle; text-align: center;" |Parameter
-| style="vertical-align: middle; text-align: center;" |<span style="background:#FFBF00">4D50315F31323334353637</span>
+! rowspan="1" style="width:33%; vertical-align: middle; text-align: center;" |HEX Code Part
+! rowspan="1" style="width:33%; vertical-align: middle; text-align: center;" |Actual Value
 |-
+| rowspan="50" style="vertical-align: middle; text-align: center;" |
 | style="vertical-align: middle; text-align: center;" |Length
-| style="vertical-align: middle; text-align: center;" |<span style="background:#FF7E00">0E</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#0048BA">02</span>
+|
 |-
 | style="vertical-align: middle; text-align: center;" |Type
-| style="vertical-align: middle; text-align: center;" |<span style="background:#3DDC84">FF</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#B0BF1A">01</span>
 |-
-| style="vertical-align: middle; text-align: center;" |Teltonika company ID (big endian)
+| style="vertical-align: middle; text-align: center;" | Flags
-| style="vertical-align: middle; text-align: center;" |<span style="background:#008000">9A08</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#7CB9E8">06</span>
 |-
-| style="vertical-align: middle; text-align: center;" |Protocol version
+| style="vertical-align: middle; text-align: center;" | Length
-| style="vertical-align: middle; text-align: center;" |<span style="background:#00FFFF">01</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#C0E8D5">1A</span>
-|
 |-
-| style="vertical-align: middle; text-align: center;" |Flags
+| style="vertical-align: middle; text-align: center;" |Type
-| style="vertical-align: middle; text-align: center;" |<span style="background:#D0FF14">B7</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#B284BE">FF</span>
-|Raw value example 0xB7. Data has to be interpretated as binary value.
-In this example would be (MSB)<span style="background:#B284BE">1</span>011 011<span style="background:#00FFFF">1</span>(LSB) and is parsed from least significant byte(LSB).
-– Temperature value presence. <span style="background:#00FFFF">1</span> Means device is reading and transmitting temperature value.
-– Humidity value presence. 1 Means device is reading and transmitting humidity value.
-– Magnetic sensor presence. 1 Means device is reading and transmitting Magnetic sensor value.
-– Magnetic sensor state (1 magnetic field is detected/0 magnetic field is not detected) Valid value is present only if bit 2 flag is set.
-– Movement sensor counter. 1 Means device is reading and transmitting movement state and count values.
-– Movement sensor angle. 1 Means device is reading and transmitting angle roll and pitch values.
-– Low Battery indication. 0 – Means device battery is from 100 to 15 % (When value changes to 1 Battery level is lower than 15 %.
-– Battery voltage value presence. <span style="background:#B284BE">1</span> Means device is reading and transmitting battery voltage value.
 |-
-| style="vertical-align: middle; text-align: center;" |Temperature
+| style="vertical-align: middle; text-align: center;" |Apple company identifier (big endian)
-| style="vertical-align: middle; text-align: center;" |<span style="background:#00FF00">08B4</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#72A0C1">4C00</span>
-| Raw value example 0x08B4 hex, 2228 dec.
-Raw value needs to be divided by 100.
-'''Real temperature''' is 22,28 Celsius.
 |-
-| style="vertical-align: middle; text-align: center;" | Humidity
+| style="vertical-align: middle; text-align: center;" |Beacon type
-| style="vertical-align: middle; text-align: center;" |<span style="background:#007FFF">12</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#EDEAE0">0215</span>
-|Raw value example 0x12 hex, 18 dec.
-Decimal value is humidity in percent. Humidity 18 %
 |-
-| style="vertical-align: middle; text-align: center;" |Movement
+| style="vertical-align: middle; text-align: center;" |UUID
-| style="vertical-align: middle; text-align: center;" |<span style="background:#F4C2C2">0CCB</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#C46210">FFFFFFFF0B8C404510C655AAB636EBEF</span>
-| (MSB)0000 1100 1100 1011(LSB) binary
-- Most significant byte(MSB) represents '''Movement status'''. In this case device is not moving 0. If it was 1 device is moving.
-1100 1100 1011 – represent detected movements count 3275 decimal value means device has detected total 3275 movement events,
 |-
-| style="vertical-align: middle; text-align: center;" |Angle
+| style="vertical-align: middle; text-align: center;" | Major
-| style="vertical-align: middle; text-align: center;" |<span style="background:#BFFF00">0BFFC7</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#EFDECD">BB70</span>
-|0B – Most significant byte represents '''device pitch'''. Device pitch can be from -90 to 90 degrees.
-In this example device pitch is 0000 1011 (2's complement) = 11° degrees.
-FFC7– Two least significant bytes represent '''device roll'''. Device roll can be from -180 to 180 degrees.
-In this example device Roll is 1111 1111 1100 0111 (2's complement) = -57° degrees
 |-
-| style="vertical-align: middle; text-align: center;" |Battery voltage
+| style="vertical-align: middle; text-align: center;" |Minor
-| style="vertical-align: middle; text-align: center;" |<span style="background:#00BFFF">67</span>
+| style="vertical-align: middle; text-align: center;" |<span style="background:#E52B50">0055</span>
-|'''Battery voltage –''' raw value example 0x67 hex. Decimal value of parameter 103'''.''' To calculate battery voltage need to use calculation 2000 + (VALUE * 10). In this case battery voltage value 2000+(103x10)= 3030 mV
-|}
-===<p style="font-size:24px><span style="color:#0054A6">FM Packet parsing example (Base firmware / Advanced mode)</span>===
-{| class="nd-othertables_2" style="width:100%;"
-|+
-! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Unparsed data
 |-
-| style="vertical-align: middle; text-align: center;"| Received data in hexadecimal stream: <code>00000000000000488E010000017CA6B6BFD8010F0E5188209AB482008600A80F0000000</code><br><code>00006000000020019090400560024000301CF0000001601D00000FF4D01D10000006D00000001014B0001B6010000CF7D</code>
+| style="vertical-align: middle; text-align: center;" |Power
-|}
+| style="vertical-align: middle; text-align: center;" |<span style="background:#FFF600">02</span>
-{| class="nd-othertables_2" style="width:100%;"
-! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |AVL Data Packet
 |-
-! colspan="2" rowspan="1" style="width:60%; vertical-align: middle; text-align: center;" |AVL Data Packet Part
+| style="vertical-align: middle; text-align: center;" |Length
-! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" |HEX Code Part
+| style="vertical-align: middle; text-align: center;" |<span style="background:#03C03C">0C</span>
 |-
-| rowspan="4" style="vertical-align: middle; text-align: center;" |
+| style="vertical-align: middle; text-align: center;" |Type
-| style="vertical-align: middle; text-align: center;" |Zero Bytes
+| style="vertical-align: middle; text-align: center;" |<span style="background:#FF3800">09</span>
-| style="vertical-align: middle; text-align: center;" |00 00 00 00
 |-
-| style="vertical-align: middle; text-align: center;" |Data Field Length
+| style="vertical-align: middle; text-align: center;" |Device name
-| style="vertical-align: middle; text-align: center;" |00 00 00 48
+| style="vertical-align: middle; text-align: center;" |<span style="background:#FFBF00">4D50315F31323334353637</span>
 |-
-| style="vertical-align: middle; text-align: center;" |Codec ID
+| style="vertical-align: middle; text-align: center;" |Length
-| style="vertical-align: middle; text-align: center;" |8E (Codec8 Extended)
+| style="vertical-align: middle; text-align: center;" |<span style="background:#FF7E00">0E</span>
 |-
-| style="vertical-align: middle; text-align: center;" |Number of Data 1 (Number of Total Records)
+| style="vertical-align: middle; text-align: center;" |Type
-| style="vertical-align: middle; text-align: center;" |01
+| style="vertical-align: middle; text-align: center;" |<span style="background:#3DDC84">FF</span>
 |-
-| rowspan="34" style="vertical-align: middle; text-align: center;" |AVL Data
+| style="vertical-align: middle; text-align: center;" |Teltonika company ID (big endian)
-| style="vertical-align: middle; text-align: center;" |Timestamp
+| style="vertical-align: middle; text-align: center;" |<span style="background:#008000">9A08</span>
-| style="vertical-align: middle; text-align: center;" |00 00 01 7C A6 B6 BF D8 (GMT: Friday, 22 October 2021 06:36:07)
 |-
-| style="vertical-align: middle; text-align: center;" |Priority
+| style="vertical-align: middle; text-align: center;" |Protocol version
-| style="vertical-align: middle; text-align: center;" |01
+| style="vertical-align: middle; text-align: center;" |<span style="background:#00FFFF">01</span>
+|
 |-
-| style="vertical-align: middle; text-align: center;" |Longitude
+| style="vertical-align: middle; text-align: center;" |Flags
-| style="vertical-align: middle; text-align: center;" |0F 0E 51 88
+| style="vertical-align: middle; text-align: center;" |<span style="background:#D0FF14">B7</span>
-|-
+|Raw value example 0xB7. Data has to be interpretated as binary value.
-| style="vertical-align: middle; text-align: center;" |Latitude
+In this example would be (MSB)<span style="background:#B284BE">1</span>011 011<span style="background:#00FFFF">1</span>(LSB) and is parsed from least significant byte(LSB).
-| style="vertical-align: middle; text-align: center;" |20 9A B4 82
-|-
-| style="vertical-align: middle; text-align: center;" |Altitude
+– Temperature value presence. <span style="background:#00FFFF">1</span> Means device is reading and transmitting temperature value.
-| style="vertical-align: middle; text-align: center;" |00 86
+– Humidity value presence. 1 Means device is reading and transmitting humidity value.
+– Magnetic sensor presence. 1 Means device is reading and transmitting Magnetic sensor value.
+– Magnetic sensor state (1 magnetic field is detected/0 magnetic field is not detected) Valid value is present only if bit 2 flag is set.
+– Movement sensor counter. 1 Means device is reading and transmitting movement state and count values.
+– Movement sensor angle. 1 Means device is reading and transmitting angle roll and pitch values.
+– Low Battery indication. 0 – Means device battery is from 100 to 15 % (When value changes to 1 Battery level is lower than 15 %.
+– Battery voltage value presence. <span style="background:#B284BE">1</span> Means device is reading and transmitting battery voltage value.
 |-
-| style="vertical-align: middle; text-align: center;" |Angle
+| style="vertical-align: middle; text-align: center;" |Temperature
-| style="vertical-align: middle; text-align: center;" |00 0A
+| style="vertical-align: middle; text-align: center;" |<span style="background:#00FF00">08B4</span>
+|Raw value example 0x08B4 hex, 2228 dec.
+Raw value needs to be divided by 100.
+'''Real temperature''' is 22,28 Celsius.
 |-
-| style="vertical-align: middle; text-align: center;" |Satellites
+| style="vertical-align: middle; text-align: center;" | Humidity
-| style="vertical-align: middle; text-align: center;" |0E
+| style="vertical-align: middle; text-align: center;" |<span style="background:#007FFF">12</span>
+|Raw value example 0x12 hex, 18 dec.
+Decimal value is humidity in percent. Humidity 18 %
 |-
-| style="vertical-align: middle; text-align: center;" |Speed
+| style="vertical-align: middle; text-align: center;" | Movement
-| style="vertical-align: middle; text-align: center;" |00 00
+| style="vertical-align: middle; text-align: center;" |<span style="background:#F4C2C2">0CCB</span>
+| (MSB)0000 1100 1100 1011(LSB) binary
+- Most significant byte(MSB) represents '''Movement status'''. In this case device is not moving 0. If it was 1 device is moving.
+1100 1100 1011 – represent detected movements count 3275 decimal value means device has detected total 3275 movement events,
 |-
-| style="vertical-align: middle; text-align: center;" |Event IO ID
+| style="vertical-align: middle; text-align: center;" |Angle
-| style="vertical-align: middle; text-align: center;" |00 00
+| style="vertical-align: middle; text-align: center;" |<span style="background:#BFFF00">0BFFC7</span>
+|0B – Most significant byte represents '''device pitch'''. Device pitch can be from -90 to 90 degrees.
+In this example device pitch is 0000 1011 (2's complement) = 11° degrees.
+FFC7– Two least significant bytes represent '''device roll'''. Device roll can be from -180 to 180 degrees.
+In this example device Roll is 1111 1111 1100 0111 (2's complement) = -57° degrees
 |-
-| style="vertical-align: middle; text-align: center;" |N of Total ID
+| style="vertical-align: middle; text-align: center;" |Battery voltage
-| style="vertical-align: middle; text-align: center;" |00 06
+| style="vertical-align: middle; text-align: center;" |<span style="background:#00BFFF">67</span>
+|'''Battery voltage –''' raw value example 0x67 hex. Decimal value of parameter 103'''.''' To calculate battery voltage need to use calculation 2000 + (VALUE * 10). In this case battery voltage value 2000+(103x10)= 3030 mV
+|}
+===<p style="font-size:24px"><span style="color:#0054A6">FM Packet parsing example (Base firmware / Advanced mode)</span>===
+{| class="nd-othertables_2" style="width:100%;"
+|+
+! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" | Unparsed data
 |-
-| style="vertical-align: middle; text-align: center;" |N1 of One Byte IO
+| style="vertical-align: middle; text-align: center;" | Received data in hexadecimal stream: <code>00000000000000488E010000017CA6B6BFD8010F0E5188209AB482008600A80F0000000</code><br><code>00006000000020019090400560024000301CF0000001601D00000FF4D01D10000006D00000001014B0001B6010000CF7D</code>
-| style="vertical-align: middle; text-align: center;" |00 00
+|}
+{| class="nd-othertables_2" style="width:100%;"
+! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |AVL Data Packet
 |-
-| style="vertical-align: middle; text-align: center;" |N2 of Two Bytes IO
+! colspan="2" rowspan="1" style="width:60%; vertical-align: middle; text-align: center;" | AVL Data Packet Part
-| style="vertical-align: middle; text-align: center;" |00 02
+! rowspan="1" style="width:40%; vertical-align: middle; text-align: center;" |HEX Code Part
 |-
-| style="vertical-align: middle; text-align: center;" |ID
+| rowspan="4" style="vertical-align: middle; text-align: center;" |
-| style="vertical-align: middle; text-align: center;" |00 19 (25 = BLE Temperature #1)
+| style="vertical-align: middle; text-align: center;" |Zero Bytes
+| style="vertical-align: middle; text-align: center;" | 00 00 00 00
 |-
-| style="vertical-align: middle; text-align: center;" |Value
+| style="vertical-align: middle; text-align: center;" |Data Field Length
-| style="vertical-align: middle; text-align: center;" |09 04 (2308=23.08°C)
+| style="vertical-align: middle; text-align: center;" |00 00 00 48
 |-
-| style="vertical-align: middle; text-align: center;" |ID
+| style="vertical-align: middle; text-align: center;" |Codec ID
-| style="vertical-align: middle; text-align: center;" |00 56 (86 = BLE Humidity #1)
+| style="vertical-align: middle; text-align: center;" |8E (Codec8 Extended)
 |-
-| style="vertical-align: middle; text-align: center;" |Value
+| style="vertical-align: middle; text-align: center;" |Number of Data 1 (Number of Total Records)
-| style="vertical-align: middle; text-align: center;" |00 36 (24 %RHT)
+| style="vertical-align: middle; text-align: center;" |01
 |-
-| style="vertical-align: middle; text-align: center;" |N4 of Four Bytes IO
+| rowspan="34" style="vertical-align: middle; text-align: center;" |AVL Data
-| style="vertical-align: middle; text-align: center;" |00 03
+| style="vertical-align: middle; text-align: center;" |Timestamp
+| style="vertical-align: middle; text-align: center;" |00 00 01 7C A6 B6 BF D8 (GMT: Friday, 22 October 2021 06:36:07)
 |-
-| style="vertical-align: middle; text-align: center;" |ID
+| style="vertical-align: middle; text-align: center;" | Priority
-| style="vertical-align: middle; text-align: center;" |01 CF (463 - BLE 1 Custom #2 = Movement status and movement events count)
+| style="vertical-align: middle; text-align: center;" |01
 |-
-| style="vertical-align: middle; text-align: center;" |Value
+| style="vertical-align: middle; text-align: center;" |Longitude
-| style="vertical-align: middle; text-align: center;" |00 00 00 16 (Currently not moving events count 22)
+| style="vertical-align: middle; text-align: center;" |0F 0E 51 88
 |-
-| style="vertical-align: middle; text-align: center;" |ID
+| style="vertical-align: middle; text-align: center;" |Latitude
-| style="vertical-align: middle; text-align: center;" |01 D0 (464 - BLE 1 Custom #3 = Angle )
+| style="vertical-align: middle; text-align: center;" |20 9A B4 82
 |-
-| style="vertical-align: middle; text-align: center;" |Value
+| style="vertical-align: middle; text-align: center;" |Altitude
-| style="vertical-align: middle; text-align: center;" |00 00 FF 4D (Pitch = 0°, Roll = -179°)
+| style="vertical-align: middle; text-align: center;" |00 86
 |-
-| style="vertical-align: middle; text-align: center;" |ID
+| style="vertical-align: middle; text-align: center;" | Angle
-| style="vertical-align: middle; text-align: center;" |01 D1 (465 - BLE 1 Custom #4 = Battery Voltage)
+| style="vertical-align: middle; text-align: center;" |00 0A
 |-
-| style="vertical-align: middle; text-align: center;" |Value
+| style="vertical-align: middle; text-align: center;" |Satellites
-| style="vertical-align: middle; text-align: center;" |00 00 00 6D (109 = 2000 + 109 * 10 mV = 3090 mV)
+| style="vertical-align: middle; text-align: center;" |0E
 |-
+| style="vertical-align: middle; text-align: center;" |Speed
-| style="vertical-align: middle; text-align: center;" |N8 of Eight Bytes IO
 | style="vertical-align: middle; text-align: center;" |00 00
 |-
-| style="vertical-align: middle; text-align: center;" |NX of X Bytes IO
+| style="vertical-align: middle; text-align: center;" |Event IO ID
-| style="vertical-align: middle; text-align: center;" |00 01
+| style="vertical-align: middle; text-align: center;" |00 00
 |-
-| style="vertical-align: middle; text-align: center;" |N’th IO ID - AVL ID.
+| style="vertical-align: middle; text-align: center;" |N of Total ID
-| style="vertical-align: middle; text-align: center;" |01 4B (331 - BLE 1 Custom #1 = Flags)
+| style="vertical-align: middle; text-align: center;" |00 06
 |-
-| style="vertical-align: middle; text-align: center;" |Length of Variable Length IO
+| style="vertical-align: middle; text-align: center;" |N1 of One Byte IO
-| style="vertical-align: middle; text-align: center;" |00 01
+| style="vertical-align: middle; text-align: center;" |00 00
+|-
+| style="vertical-align: middle; text-align: center;" |N2 of Two Bytes IO
+| style="vertical-align: middle; text-align: center;" |00 02
+|-
+| style="vertical-align: middle; text-align: center;" |ID
+| style="vertical-align: middle; text-align: center;" |00 19 (25 = BLE Temperature #1)
+|-
+| style="vertical-align: middle; text-align: center;" |Value
+| style="vertical-align: middle; text-align: center;" |09 04 (2308=23.08°C)
+|-
+| style="vertical-align: middle; text-align: center;" |ID
+| style="vertical-align: middle; text-align: center;" |00 56 (86 = BLE Humidity #1)
+|-
+| style="vertical-align: middle; text-align: center;" | Value
+| style="vertical-align: middle; text-align: center;" | 00 36 (24 %RHT)
+|-
+| style="vertical-align: middle; text-align: center;" | N4 of Four Bytes IO
+| style="vertical-align: middle; text-align: center;" |00 03
+|-
+| style="vertical-align: middle; text-align: center;" |ID
+| style="vertical-align: middle; text-align: center;" |01 CF (463 - BLE 1 Custom #2 = Movement status and movement events count)
+|-
+| style="vertical-align: middle; text-align: center;" |Value
+| style="vertical-align: middle; text-align: center;" |00 00 00 16 (Currently not moving events count 22)
+|-
+| style="vertical-align: middle; text-align: center;" |ID
+| style="vertical-align: middle; text-align: center;" |01 D0 (464 - BLE 1 Custom #3 = Angle )
+|-
+| style="vertical-align: middle; text-align: center;" |Value
+| style="vertical-align: middle; text-align: center;" |00 00 FF 4D (Pitch = 0°, Roll = -179°)
+|-
+| style="vertical-align: middle; text-align: center;" |ID
+| style="vertical-align: middle; text-align: center;" |01 D1 (465 - BLE 1 Custom #4 = Battery Voltage)
+|-
+| style="vertical-align: middle; text-align: center;" |Value
+| style="vertical-align: middle; text-align: center;" |00 00 00 6D (109 = 2000 + 109 * 10 mV = 3090 mV)
 |-
-| style="vertical-align: middle; text-align: center;" |Value of Variable Length IO
-| style="vertical-align: middle; text-align: center;" |B7 = (MSB)<span style="background:#B284BE">1</span>1011 011<span style="background:#00FFFF">1</span>(LSB)
+| style="vertical-align: middle; text-align: center;" |N8 of Eight Bytes IO
-It's parsed from least significant byte(LSB):
+| style="vertical-align: middle; text-align: center;" |00 00
+|-
+| style="vertical-align: middle; text-align: center;" |NX of X Bytes IO
+| style="vertical-align: middle; text-align: center;" |00 01
+|-
+| style="vertical-align: middle; text-align: center;" |N’th IO ID - AVL ID.
+| style="vertical-align: middle; text-align: center;" |01 4B (331 - BLE 1 Custom #1 = Flags)
+|-
+| style="vertical-align: middle; text-align: center;" |Length of Variable Length IO
+| style="vertical-align: middle; text-align: center;" |00 01
+|-
+| style="vertical-align: middle; text-align: center;" | Value of Variable Length IO
+| style="vertical-align: middle; text-align: center;" |B7 = (MSB)<span style="background:#B284BE">1</span>1011 011<span style="background:#00FFFF">1</span>(LSB)
+It's parsed from least significant byte(LSB):
@@ Line 1,850: / Line 2,023: @@
 |-
 |}
-===<p style="font-size:24px><span style="color:#0054A6">FM EYE Sensor record parsing example with the new firmware (Evaluation firmware / EYE Sensor filtering by name)</span>===
+===<p style="font-size:24px"><span style="color:#0054A6">FM EYE Sensor record parsing example with the new firmware (Evaluation firmware / EYE Sensor filtering by name)</span>===
 '''Parsing EYE Sensor records example''' <br>
 Below You will find an example on how to parse EYE Sensor record with two EYE Sensors present.
@@ Line 1,858: / Line 2,031: @@
 ! colspan="3" style="border-bottom: 2px solid #0054A6; vertical-align: middle; text-align: center;" |Unparsed data
 |-
-| style="vertical-align: middle; text-align: center;"| Received data in hexadecimal stream: <code>00000000000000908E0100000183407a2beb000f0e3fe3209ab40e008801290d00002c350001000000000</code><br><code>000000000012c350063<span style="background-color:#91d4b9;">0130050f4d50315f42453241413500000000000602d60807012f0801000901000a024e000b01f90c025aff0d01000e020bcc</code><br><code><span style="background-color:#91d4b9;">30050f4d50315f33464539414100000000000602cb080701300801000901000a0263000b01000c02af000d01000e020b90</code><code>010000fef4</code>
+| style="vertical-align: middle; text-align: center;" |Received data in hexadecimal stream: <code>00000000000000908E0100000183407a2beb000f0e3fe3209ab40e008801290d00002c350001000000000</code><br><code>000000000012c350063<span style="background-color:#91d4b9;">0130050f4d50315f42453241413500000000000602d60807012f0801000901000a024e000b01f90c025aff0d01000e020bcc</code><br><code><span style="background-color:#91d4b9;">30050f4d50315f33464539414100000000000602cb080701300801000901000a0263000b01000c02af000d01000e020b90</code><code>010000fef4</code>
 |}
@@ Line 1,899: / Line 2,072: @@
 |-
 | style="vertical-align: middle; text-align: center;" |Angle
-| style="vertical-align: middle; text-align: center;" |01 29
+| style="vertical-align: middle; text-align: center;" | 01 29
 |-
 | style="vertical-align: middle; text-align: center;" |Satellites
-| style="vertical-align: middle; text-align: center;" |0d
+| style="vertical-align: middle; text-align: center;" | 0d
 |-
 | style="vertical-align: middle; text-align: center;" |Speed
@@ Line 1,914: / Line 2,087: @@
 |-
 | style="vertical-align: middle; text-align: center;" |N1 of One Byte IO
-| style="vertical-align: middle; text-align: center;" |00 00
+| style="vertical-align: middle; text-align: center;" | 00 00
 |-
-| style="vertical-align: middle; text-align: center;" |N2 of Two Bytes IO
+| style="vertical-align: middle; text-align: center;" | N2 of Two Bytes IO
 | style="vertical-align: middle; text-align: center;" |00 00
 |-
@@ Line 1,948: / Line 2,121: @@
 |}
-=== Parsing AVL ID 11317 data ===
+===Parsing AVL ID 11317 data===
 {| class="nd-othertables_2" style="width:100%;"
@@ Line 1,982: / Line 2,155: @@
 | style="vertical-align: middle; text-align: center;" |4d 50 31 5f 42 45 32 41 41 35 00 00 00 00 00
 |-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
+| style="vertical-align: middle; text-align: center;" | Parameter ID
 | style="vertical-align: middle; text-align: center;" |06 (Eye Sensor #1 temperature)
 |-
@@ Line 2,014: / Line 2,187: @@
 |-
 | style="vertical-align: middle; text-align: center;" |Parameter data length
-| style="vertical-align: middle; text-align: center;" |01 (1 byte)
+| style="vertical-align: middle; text-align: center;" | 01 (1 byte)
 |-
 | style="vertical-align: middle; text-align: center;" |Parameter data
@@ Line 2,026: / Line 2,199: @@
 |-
 | style="vertical-align: middle; text-align: center;" |Parameter data
-| style="vertical-align: middle; text-align: center;" |4e 00 (converted to dec = 19968)
+| style="vertical-align: middle; text-align: center;" | 4e 00 (converted to dec = 19968)
 |-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
+| style="vertical-align: middle; text-align: center;" | Parameter ID
 | style="vertical-align: middle; text-align: center;" |0b (Parameter ID #11 Eye Sensor #1 Pitch)
 |-
 | style="vertical-align: middle; text-align: center;" |Parameter Data length
-| style="vertical-align: middle; text-align: center;" |01 (1 byte)
+| style="vertical-align: middle; text-align: center;" | 01 (1 byte)
 |-
 | style="vertical-align: middle; text-align: center;" |Parameter data
@@ Line 2,056: / Line 2,229: @@
 | style="vertical-align: middle; text-align: center;" |00 (low battery voltage not detected)
 |-
-| style="vertical-align: middle; text-align: center;" |Parameter ID
+| style="vertical-align: middle; text-align: center;" | Parameter ID
 | style="vertical-align: middle; text-align: center;" |0e (Eye Sensor #1 battery voltage)
 |-
@@ Line 2,066: / Line 2,239: @@
 |-
 ! style="vertical-align: middle; text-align: center;" |Eye Sensor #2 data length
-| style="vertical-align: middle; text-align: center;" |30 (48 bytes)
+| style="vertical-align: middle; text-align: center;" | 30 (48 bytes)
 |-
 | style="vertical-align: middle; text-align: center;" |Parameter ID
-| style="vertical-align: middle; text-align: center;" |05 (Eye Sensor Device name)
+| style="vertical-align: middle; text-align: center;" | 05 (Eye Sensor Device name)
 |-
 | style="vertical-align: middle; text-align: center;" |Parameter data length
@@ Line 2,102: / Line 2,275: @@
 |-
 | style="vertical-align: middle; text-align: center;" |Parameter Data
-| style="vertical-align: middle; text-align: center;" |00 (no magnet presence detected)
+| style="vertical-align: middle; text-align: center;" | 00 (no magnet presence detected)
 |-
 | style="vertical-align: middle; text-align: center;" |Parameter ID
@@ Line 2,111: / Line 2,284: @@
 |-
 | style="vertical-align: middle; text-align: center;" |Parameter Data
-| style="vertical-align: middle; text-align: center;" |00 (no movement presence detected)
+| style="vertical-align: middle; text-align: center;" | 00 (no movement presence detected)
 |-
 | style="vertical-align: middle; text-align: center;" |Parameter ID
@@ Line 2,165: / Line 2,338: @@
 . To avoid mechanical damage, it is advised to transport the device in an impact-proof package.
-. In case of malfunction contact yours Teltonika account manager or write to technical support team over VIP helpdesk.<br>
+. In case of malfunction contact your Teltonika account manager or write to the technical support team over the Helpdesk.<br>
-[[File:Safety.jpg]]
+[[File:Safety information.png]]
-==<p style="font-size:32px><span style="color:#0054A6">Certification & Approvals</span></p>==
+==<p style="font-size:32px"><span style="color:#0054A6">Certification & Approvals</span></p>==
 {| class="wikitable"
 |+
 ! style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Certificates
-! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |
+! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" |Links
+|-
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |E-Mark (EU)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_E-Mark|Yes]]
+|-
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |FCC (USA)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_FCC|Yes]]
+|-
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |CE/RED (EU)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_CE_/_RED|Yes]]
+|-
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |RoHS (EU)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_RoHS|Yes]]
 |-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | E-Mark (EU)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |REACH (EU)
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTSMP1_E-Mark|YES]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_REACH|Yes]]
 |-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | FCC (USA)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Anatel (EU) (PR)
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTSMP1_FCC|YES]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_ANATEL|Yes]]
 |-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | CE/RED (EU)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |IP rating
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTSMP1_CE_/_RED|YES]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_IP67|Yes]]
 |-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | RoHS (EU)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |SIRIM QAS
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTSMP1_RoHS|YES]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_SIRIM QAS|Yes]]
 |-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | REACH (EU)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |SDPPI POSTEL
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTSMP1_REACH|YES]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_SDPPI POSTEL|Yes]]
 |-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Anatel(EU) (PR)
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |TELEC
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_ANATEL|YES]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_TELEC|Yes]]
 |-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | IP rating
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |ATEX
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTSMP1_IP67|YES]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_ATEX|Yes]]
 |-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SIRIM QAS
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |EN12830
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTSMP1_SIRIM QAS|YES]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_EN12830|Yes]]
+|}
+==<p style="font-size:32px"><span style="color:#0054A6">Nomenclature & Classification codes</span></p>==
+{| class="wikitable"
+|+
+! style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | Name
+! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | Links
 |-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | SDPPI POSTEL
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |EAN
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTSMP1_SDPPI POSTEL|YES]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_EAN|Yes]]
 |-
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | TELEC
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |HS
-| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" | [[BTSMP1_TELEC|YES]]
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1_HS|Yes]]
+|}
+==<p style="font-size:32px"><span style="color:#0054A6">Memberships</span></p>==
+{| class="wikitable"
+|+
+! style="width:50%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | Name
+! style="width:10%; border: 1px solid white; border-bottom: 2px solid #0054A6; background: white; color: #0054A6; text-align: left;" | Links
+|-
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |Bluetooth® SIG
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1 Bluetooth® SIG|Yes]]
+|-
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |WEEE
+| style="border: 1px solid white; border-bottom: 2px solid #E8E8E8; text-align: left; vertical-align: center; background: white;" |[[BTSMP1 WEEE|Yes]]
 |}
 ==<p style="font-size:32px"><span style="color:#0054A6">External Links</span></p>==
-=== Product Page ===
+===Product Page===
 https://teltonika-gps.com/eye/
-=== Product Change Notifications ===
+===Product Change Notifications===
 The latest Product Change Notifications can be found: [[BTSMP1_Product_Change_Notifications|Product Change Notifications]]
-=== Software Errata ===
+===Software Errata===
-Firmware Errata: [https://wiki.teltonika-gps.com/view/BTS_firmware_errata]
+Firmware Errata: [https://wiki.teltonika-gps.com/view/BTS_firmware_errata BTS firmware errata]
-EYE App Errata: [https://wiki.teltonika-gps.com/view/EYE_APP_errata]
+EYE App Errata: [https://wiki.teltonika-gps.com/view/EYE_APP_errata BTS APP errata]
-=== Promotional Material ===
+===Promotional Material===
-[https://wiki.teltonika-gps.com/view/BTSXXX_Promotional_Material| Product Promotional Material Page]
+[[EYE Sensor Promotional Material]]
-=== Compatibilty with other Teltonika Devices ===
+===Compatibilty with other Teltonika Devices===
 Teltonika Networks:
 https://wiki.teltonika-networks.com/view/Bluetooth_EYE_Sensor_and_EYE_Beacon_support
-=== Partner Providers Supporting Software ===
+===Partner Providers Supporting Software===
-* [[3Dtracking with Fleet Management (FM)|3Dtracking]]
+*[[3Dtracking with Fleet Management (FM)|3Dtracking]]
-* [[GPS-server with Fleet Management (FM)|GPS-server]]
+*[[GPS-server with Fleet Management (FM)|GPS-server]]
-* [[Gurtam Wialon with Fleet Management (FM)|Gurtam Wialon]]
+*[[Wialon with Fleet Management (FM)|Wialon]]
-* [[Mapon with Fleet Management (FM)|Mapon]]
+*[[Mapon with Fleet Management (FM)|Mapon]]
-* [[WhiteLabel Tracking with Fleet Management (FM)|WhiteLabel Tracking]]
+*[[WhiteLabel Tracking with Fleet Management (FM)|WhiteLabel Tracking]]
-=== '''[[EYE FAQ|Frequently asked questions (FAQ)]]''' ===
+==='''[[EYE FAQ|Frequently asked questions (FAQ)]]'''===
-* [[EYE FAQ#Questions%20about%20Power%20and%20Electrical%20characteristics|Questions about Power and Electrical characteristics]]
+*[[EYE FAQ#Questions%20about%20Power%20and%20Electrical%20characteristics|Questions about Power and Electrical characteristics]]
-* [[EYE FAQ#Questions%20about%20EYE%20Accessory%20configuration%20.28EYE%20APP.29|Questions about EYE Accessory configuration (EYE APP)]]
+*[[EYE FAQ#Questions%20about%20EYE%20Accessory%20configuration%20.28EYE%20APP.29|Questions about EYE Accessory configuration (EYE APP)]]
-* [[EYE FAQ#Questions%20about%20FMBxxx%20compatibility%20with%20EYE%20Accessories|Questions about FMBxxx compatibility with EYE Accessories]]
+*[[EYE FAQ#Questions%20about%20FMBxxx%20compatibility%20with%20EYE%20Accessories|Questions about FMBxxx compatibility with EYE Accessories]]
-* [[EYE FAQ#Questions%20about%20Protocols|Questions about Protocols]]
+*[[EYE FAQ#Questions%20about%20Protocols|Questions about Protocols]]
-* [[EYE FAQ#Other%20questions%20.28Questions%20without%20category.29|Other questions  (Questions without category)]]
+*[[EYE FAQ#Other%20questions%20.28Questions%20without%20category.29|Other questions  (Questions without category)]]
-=== Documents ===
+===Documents===
-==== [https://teltonika-gps.com/datasheet_eye_sensor.pdf Datasheet PDF] ====
+{|
+|[[File:pdf_icon.png|32px|]]
-==== [https://teltonika-gps.com/BTS_Quick_Manual.pdf Quick Manual PDF] ====
+|[[Media:Datasheet-BTSMP1 EYE SENSOR 4.5.pdf|Datasheet PDF (EN)]]
+|<small>(Updated on: {{{datasheet_date|2024-03-15}}})</small>
+|
+|[[File:pdf_icon.png|32px|]]
+|[[Media:QM-BTSMP1.pdf|BTSMP1 Quick Manual (EN)]]
+|<small>(Updated on: {{{datasheet_date|2024-01-17}}})</small>
+|
+|[[File:pdf_icon.png|32px|]]
+|[https://wiki.teltonika-gps.com/images/d/d1/North-America-flyer.pdf North America Flyer]
+|<small>(Updated on: {{{datasheet_date|2023-03-13}}})</small>
+|}
 [[Category:Sensors]]

Search