Movement event

From Wiki Knowledge Base | Teltonika GPS
Revision as of 13:18, 14 April 2023 by Martyna.D (talk | contribs) (Protected "Movement event" ([Edit=Allow only administrators] (indefinite) [Move=Allow only administrators] (indefinite)))

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > Autonomous Trackers > TMT250 > TMT250 FAQ > Movement event

Movement Event

Movement Event.png

Movement Event scenario makes an eventual high priority record (and sends an optional SMS) when the device is stationary or in motion (depending on configured "Mode") for set Timeout.
Timeout is a configured amount of time (in seconds) after which an eventual high priority record is generated.
Movement Event mode generates a record after the start of movement whereas No Movement Event generates a record after the stop of movement.

NOTE! In case if No Movement Event is selected as Mode, then Pre Alarm Timeout is counted additionally.

ManDown/No/Movement while charging disables Mandown, No Movement, Movement events while on device is charging.