Changes

no edit summary
Line 4: Line 4:  
Here are steps how to capture LV-CAN200, ALL-CAN300, CAN-CONTROL log from FMB1YX series devices.<p>This functionality is available after '''03.08.00''' firmware version.</p>
 
Here are steps how to capture LV-CAN200, ALL-CAN300, CAN-CONTROL log from FMB1YX series devices.<p>This functionality is available after '''03.08.00''' firmware version.</p>
   −
#Make sure that CAN adapter is [https://youtu.be/V9RTdSy1E8w connected properly] to the vehicle and to the FMB1YX series device.
+
#Make sure that the CAN adapter is [https://youtu.be/V9RTdSy1E8w connected properly] to the vehicle and to the FMB1YX series device.
 
#'''Start vehicle engine'''.
 
#'''Start vehicle engine'''.
 
#Send following '''SMS commands''' to FMX1YX device:  
 
#Send following '''SMS commands''' to FMX1YX device:  
 
#*If you have set SMS login and password:<code>login pass cpureset</code> -> <code>login pass log2sdfilterset 0;4;1</code>
 
#*If you have set SMS login and password:<code>login pass cpureset</code> -> <code>login pass log2sdfilterset 0;4;1</code>
 
#*If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>cpureset</code> -><code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;4;1</code><p>If command was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:3</code></p><p>Make sure:</p><p>Filter 0 - turn off all filters</p><p>Filter 4 - turn on CAN adapter filter</p><p>Filter 1 - save installed filters</p>
 
#*If SMS login and password are not set leave two spaces before command: <code><span style="color:#f8f9fa">aa</span>cpureset</code> -><code><span style="color:#f8f9fa">aa</span>log2sdfilterset 0;4;1</code><p>If command was sent correctly you should receive SMS Response:<code>Enabled Trace Filters:3</code></p><p>Make sure:</p><p>Filter 0 - turn off all filters</p><p>Filter 4 - turn on CAN adapter filter</p><p>Filter 1 - save installed filters</p>
#After SMS response message CAN adapter log capturing has been started.
+
#After the SMS response message CAN adapter log capturing has been started.
 
#Wait at least '''5 minutes''' to get enough CAN bus data and '''turn off''' vehicle engine.
 
#Wait at least '''5 minutes''' to get enough CAN bus data and '''turn off''' vehicle engine.
 
#'''Download''' captured log (dump) files.
 
#'''Download''' captured log (dump) files.