Changes

no edit summary
Line 3: Line 3:     
Upgrading CAN-CONTROL to CAN-CONTROl+Immobilizer
 
Upgrading CAN-CONTROL to CAN-CONTROl+Immobilizer
 
+
<br>
 
Possible problems:
 
Possible problems:
 
+
<br>
1. Doors Lock/Unlock is not working.
+
1. Doors Lock/Unlock is not working.<br>
2. Doors Lock/Unlock works but engine blocking and unblock does not. Most of times response will be: CMD not supported. In some situations engine block will work but unblocking will not.
+
2. Doors Lock/Unlock works but engine blocking and unblock does not. Most of times response will be: CMD not supported. In some situations engine block will work but unblocking will not.<br>
 
+
<br>
 
After installation is done and program number is set please do learning procedure.
 
After installation is done and program number is set please do learning procedure.
 
+
<br>
1. send lvcansetprog 11120 (Or any other)  
+
1. send lvcansetprog 11120 (Or any other) <br>
2. send lvcansetprog (one that is for your car model)
+
2. send lvcansetprog (one that is for your car model)<br>
 
3. After you will receive response please do learning with key locking/unlocking 3 times. lock>unlock;lock>unlock;lock>unlock;
 
3. After you will receive response please do learning with key locking/unlocking 3 times. lock>unlock;lock>unlock;lock>unlock;
 +
<br>
 +
Now you can try commands to open and close doors.<br>
 +
Now you can try commands to block and unblock engine.<br>
 +
<br>
 +
All sms/gprs responces should inform you that command has been completed succesffully.<br>
   −
Now you can try commands to open and close doors.
+
Note: If installing CAN-CONTROL adapter into different vehicle learning must be initiated. If adapter will be installed  back on previous car model learning step must be repeated.<br>
Now you can try commands to block and unblock engine.
  −
 
  −
All sms/gprs responces should inform you that command has been completed succesffully.
  −
 
  −
Note: If installing CAN-CONTROL adapter into different vehicle learning must be initiated. If adapter will be installed  back on previous car model learning step must be repeated.