Changes

no edit summary
Line 46: Line 46:  
[[Image:Universal Beacons.png]]
 
[[Image:Universal Beacons.png]]
   −
Beacon are sent to server in a new variable length Beacon IO (AVL ID 548) '''(Different from Simple mode!)'''.
+
When Advanced mode is selected - Beacon data arrives through AVL ID 548 (''Beacon list and Advanced list'' ''are not separated''). In Simple mode data arrives by AVL ID 385. Codec 8 Extended is mandatory for both Beacon capturing modes.
   −
Beacon ID source can be selected.
+
When Advanced Beacon mode is selected - Beacon list acquires new option too. No longer it is required to insert full UUID, major or minor. In advanced mode it is possible to mask / ignore specific parts of UUID or major, or minor. Symbol " * " is used for masking. This allows to write shorter or only partial UUIDs in the Beacon list. Note: it is not possible to use " * " symbol to mask Manufacturer ID in the Advanced list.
*When Beacon ID is used, source is used as configured in Beacon ID offset and Beacon ID size columns. When Beacon MAC address is selected.
  −
*Beacon ID will be replaced with MAC address. IO structure remains the same, but Beacon ID size will always be reported as 0x06.
      
====Parsing Advanced Beacon data from record (AVL ID 548)====
 
====Parsing Advanced Beacon data from record (AVL ID 548)====