0
edits
Changes
Advanced Beacon Capturing Configuration (view source)
Revision as of 15:57, 16 December 2021
, 15:57, 16 December 2021no edit summary
* '''''Configured''''' – device will only capture beacons by given data in Beacon list and Advanced list if enabled.
* '''''Configured''''' – device will only capture beacons by given data in Beacon list and Advanced list if enabled.
'''Beacon Mode'''<br>
'''Beacon Mode'''
* '''''Simple''''' – When simple mode is selected beacon parsing is done automatically (Eddystone and iBeacon protocols are supported) ('''AVL ID 385''').
* '''''Simple''''' – When simple mode is selected beacon parsing is done automatically (Eddystone and iBeacon protocols are supported) ('''AVL ID 385''').
* '''''Advanced''''' – When advanced beacon mode is selected, beacon data capturing can be configured manually ('''AVL ID 548''').<br>
* '''''Advanced''''' – When advanced beacon mode is selected, beacon data capturing can be configured manually ('''AVL ID 548''').
'''Beacon Record'''<br>
'''Beacon Record'''
* '''''On Change''''' – On change mode - device will not create Beacon record after every scan procedure is completed unless scanned Beacon list will change.
* '''''On Change''''' – On change mode - device will not create Beacon record after every scan procedure is completed unless scanned Beacon list will change.
* '''''Periodic''''' – All beacons are sent to the server. (Record will be saved according to configured period).<br>
* '''''Periodic''''' – All beacons are sent to the server. (Record will be saved according to configured period).
'''Beacon Record Priority''' - Beacon record saving period:
'''Beacon Record Priority''' - Beacon record saving period:
When Advanced mode is selected - Beacon data arrives through AVL ID 548 (''Beacon list and Advanced list'' ''are not separated''). In Simple mode data arrives by AVL ID 385. Codec 8 Extended is mandatory for both Beacon capturing modes.
When Advanced mode is selected - Beacon data arrives through AVL ID 548 (''Beacon list and Advanced list'' ''are not separated''). In Simple mode data arrives by AVL ID 385. Codec 8 Extended is mandatory for both Beacon capturing modes.
===Beacon List===
List of authorized beacons, Eddystone and iBeacon protocols are ''supported*.'' Example of the configured beacons detection in the List:<br>
[[File:BeaconCongif.mp4|1750px]]
''*Beacon Ids can be entered the following way: Namspace:CompanyID, UUID:Major:Minor. Any of the ID parts''
can be omitted ex., Namespace:. UUID::, UUID::Minor, etc
The Beacons settings are configured as showed. The iBeacon or Eddystone is added to the list with the following structure:
*'''''iBeacon''''' – 20 Bytes ('''UUDI''' (16-bytes : '''Major'''(2-bytes) : '''Minor''' (2-bytes))
*'''''Eddystone''''' – 16 Bytes ('''Namespace''' (10-bytes) : '''Instance ID'''(6-bytes))
There is a possibility to detect the devices just by UUID or Namespace (see the 2 and 6 elements in the list).
Or by the Major/Minor for iBeacons and Namespace for Eddystone. (see the 3 and 7 elements in the list).<br />
There is also possible to select Beacons Detection as the Configured, in this case, the beacons will only be detected and send if they were added to the Beacons List.
From '''3.27.07.Rev.00''' Beacon list is expanded to support 50 beacons IDs.
When Advanced Beacon mode is selected - Beacon list acquires new option too. No longer it is required to insert full UUID, major or minor. In advanced mode it is possible to mask / ignore specific parts of UUID or major, or minor. Symbol " * " is used for masking. This allows to write shorter or only partial UUIDs in the Beacon list. Note: it is not possible to use " * " symbol to mask Manufacturer ID in the Advanced list.
When Advanced Beacon mode is selected - Beacon list acquires new option too. No longer it is required to insert full UUID, major or minor. In advanced mode it is possible to mask / ignore specific parts of UUID or major, or minor. Symbol " * " is used for masking. This allows to write shorter or only partial UUIDs in the Beacon list. Note: it is not possible to use " * " symbol to mask Manufacturer ID in the Advanced list.
|-
|-
|}
|}
