Changes

Line 1: Line 1:  +
==Beacon List Settings before FW ver. 3.27.07.Rev.00==
 +
This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].<br>
 +
===Beacon Settings===
 +
 +
'''Beacon Detection'''<br>
 +
* '''''Disabled''''' – Functionality disabled.<br>
 +
* '''''All''''' – All visible beacons are detected. (Max. 100)<br>
 +
* '''''Configured''''' – Only beacons from the list are sent to server<br>
 +
 +
'''Beacon Record'''<br>
 +
* '''''Eventual''''' – Record is sent after scan procedure is completed. This parameter depends from the [[{{{model|FMB120}}} Bluetooth 4.0 settings|'''Bluetooth 4.0 Scan Settings'''.]]<br>
 +
* '''''Periodic''''' – All beacons are sent to the server. (Record will be saved according to configured period).<br>
 +
 +
'''Record Period''' - Beacon record saving period:
 +
* Record Period on Move & Record Period on Stop. Timers for record generation when the device is moving and staying at the place.
 +
* Record Period on Move (Default value 60 seconds)<br>
 +
* Record Period on Stop (Default value 60 seconds)<br><br>
 +
 +
[[File:Oldbeaconsets.gif|left]]<br><br><br><br><br><br><br><br><br><br>
 +
 +
While selecting the '''Beacons Detection''' as '''All''', the device will detect all beacons which are located around the device.
 +
Select '''Beacons Detection''' as the '''Configured''', in this case, the beacons will only be detected and send if they were added to the Beacons List.
 +
 +
===Beacon List===
 +
List of authorized beacons, Eddystone and iBeacon protocols are ''supported*.'' Example of the configured beacons detection in the List:<br>
 +
 +
[[File:BeaconCongif.mp4|1750px]]
 +
 +
''*Beacon Ids can be entered the following way: Namspace:CompanyID, UUID:Major:Minor. Any of the ID parts
 +
can be omitted ex., Namespace:. UUID::, UUID::Minor, etc''
 +
 +
The Beacons settings are configured as showed. The iBeacon or Eddystone is added to the list with the following structure:
 +
* '''''iBeacon''''' – 20 Bytes ('''UUDI''' (16-bytes : '''Major'''(2-bytes) : '''Minor''' (2-bytes))
 +
* '''''Eddystone''''' – 16 Bytes ('''Namespace''' (10-bytes) : '''Instance ID'''(6-bytes))
 +
 +
There is a possibility to detect the devices just by UUID or Namespace (see the 2 and 6 elements in the list).
 +
Or by the Major/Minor for iBeacons and Namespace for Eddystone. (see the 3 and 7 elements in the list).<br/>
 +
There is also possible to select Beacons Detection as the Configured, in this case, the beacons will only be detected and send if they were added to the Beacons List.
 +
 
==Beacon List Settings after FW ver. 3.27.07.Rev.00==
 
==Beacon List Settings after FW ver. 3.27.07.Rev.00==
 
This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].
 
This page is dedicated for explanation of Bluetooth settings and also Beacon parameters in [[Teltonika_Configurator_versions#For_FMB_series|'''FMB device configurator''']]. A more extensive guide can be found [[How to start with FMB devices and Beacons?|'''How to start with FMB devices and Beacons?''']].