0
edits
Changes
Advanced Beacon Capturing Configuration (view source)
Revision as of 14:54, 23 December 2021
, 14:54, 23 December 2021no edit summary
* '''Additional Data Offset''' and '''Additional Data Size''' - allows to capture specific data of the Beacons advertised packet e.g. battery voltage or status. These additional parameters depend on Beacon type and advertisement packet. In order to capture full packet of the Beacon - Offset can be left at 0 and Size matched by actual length of the advertised packet.
* '''Additional Data Offset''' and '''Additional Data Size''' - allows to capture specific data of the Beacons advertised packet e.g. battery voltage or status. These additional parameters depend on Beacon type and advertisement packet. In order to capture full packet of the Beacon - Offset can be left at 0 and Size matched by actual length of the advertised packet.
* '''Beacon ID Source'''- Beacon ID source can be selected. When Beacon ID is used, source is used as configured in Beacon ID offset and Beacon ID size columns. When Beacon MAC address is selected, Beacon ID will be replaced with MAC address. IO structure remains the same, but Beacon ID size will always be reported as 0x06.
* '''Beacon ID Source'''- Beacon ID source can be selected. When Beacon ID is used, source is used as configured in Beacon ID offset and Beacon ID size columns. When Beacon MAC address is selected, Beacon ID will be replaced with MAC address. IO structure remains the same, but Beacon ID size will always be reported as 0x06.
==== EYE Sensor Capturing Configuration ====
As an example on how to set Beacons Capturing Configuration parameters EYE Sensor model can be used.
[[File:Beacons Capturing Configuration set.png|thumb|1143x1143px|Parameter values]]
[[File:Beacon temp marked.png|right|frameless|545x545px]]
Information shown after setting the parameters.
[[File:Eddystone temperature.png|left|frameless|552x552px|Eddystone temperature]]
===Beacon List===
===Beacon List===
