Changes

m
Line 40: Line 40:  
If ''Avg Const'' value is 10, new value must be present for 1 second to register the change to a new value. Internal sampling is done every 40ms, so 25 samples are taken per second. To configure 5 seconds of averaging multiply 10 by 5 yielding 50 as ''Avg Const'' value. The same logic works even if device is in Deep Sleep mode.<br/>Averaging follows RC exponential curves, see image below:
 
If ''Avg Const'' value is 10, new value must be present for 1 second to register the change to a new value. Internal sampling is done every 40ms, so 25 samples are taken per second. To configure 5 seconds of averaging multiply 10 by 5 yielding 50 as ''Avg Const'' value. The same logic works even if device is in Deep Sleep mode.<br/>Averaging follows RC exponential curves, see image below:
 
[[Image:Fmb120_avg_const.png|300px|center]]
 
[[Image:Fmb120_avg_const.png|300px|center]]
?????For Boolean values of 5τ, values is used, that means value change is taken when new values is averaged to more then 99.3%.
+
?????For Boolean values of 5τ, values is used, that means value change is taken when new values is averaged to more than 99.3%.
    
==OBD II (Bluetooth) and LVCAN I/O elements==
 
==OBD II (Bluetooth) and LVCAN I/O elements==
 
''OBD II'' (Bluetooth) and ''LVCAN'' columns show I/O elements that can be obtained accordingly from OBD II Bluetooth dongle and LV-CAN200/ALL-CAN300 connected to FMB120 device. All I/O configuration is as described in [[FMB120 I/O settings|I/O settings]] section, except OBD II (Bluetooth) I/O element do not have an averaging constant parameter.<br/>Detailed description of LVCAN I/O element configuration is given in [[FMB120 CAN adapters|FMB120 with LV-CAN200 and ALL-CAN300 CAN adapters]].
 
''OBD II'' (Bluetooth) and ''LVCAN'' columns show I/O elements that can be obtained accordingly from OBD II Bluetooth dongle and LV-CAN200/ALL-CAN300 connected to FMB120 device. All I/O configuration is as described in [[FMB120 I/O settings|I/O settings]] section, except OBD II (Bluetooth) I/O element do not have an averaging constant parameter.<br/>Detailed description of LVCAN I/O element configuration is given in [[FMB120 CAN adapters|FMB120 with LV-CAN200 and ALL-CAN300 CAN adapters]].