27
edits
Changes
Speed Limiting Solution FMC130+ETC (view source)
Revision as of 15:39, 27 November 2022
, 15:39, 27 November 2022→Conclusion
Speed limiting is achieved when max speed is exceeded. Relay is activated on DOUT1 which will disable the acceleration pedal, turn off the fuel pump or close the solenoid valve.
Speed limiting is achieved when max speed is exceeded. Relay is activated on DOUT1 which will disable the acceleration pedal, turn off the fuel pump or close the solenoid valve.
'''Note: The speed will be limited within +10 km/h from the configured value when the [https://wiki.teltonika-gps.com/view/FMC130_System_settings#Speed_Source speed source] is set to GNSS. To achieve the accurate speed limiting [https://wiki.teltonika-gps.com/view/FMC130_System_settings#Speed_Source speed source] is set to GNSS and for more accuracy [https://teltonika-gps.com/product/lv-can200/ CAN adapters] can be implemented.'''
'''Note: The speed will be limited within +10 km/h from the configured value when the [https://wiki.teltonika-gps.com/view/FMC130_System_settings#Speed_Source speed source] is set to GNSS. To achieve the accurate speed limiting [https://teltonika-gps.com/product/lv-can200/ CAN adapters] can be implemented.'''
[[Category: Usage scenarios]]
[[Category: Usage scenarios]]