Template:FMA SMS/GPRS command list

Read chapter 5.10 to know how to construct a proper SMS message and send it to FMA1YX device. All commands are case sensitive. While FMA1YX operates in Deep Sleep mode and user tries to send SMS message it cannot arrive to FMA1YX device, because GSM/GPRS module is disabled most of the time (wake up depends on Send Period parameter). FMA1YX will receive the SMS when it wakes up (exits deep sleep mode).

SMS command list

Command	Description	Response
getstatus	Modem Status information.	Yes
getweektime	Current device time, Day of Week and amount of minutes passed since start of week	Yes
getops	List of currently available GSM operator	Yes
getcfgtime	Date and Time of last successful configuration	Yes
ggps	Returns location information with Google maps link.	Yes
getgps	Current GPS data, date and time.	Yes
cpureset	Resets device.	No
resetprof	Reset all FLASH1 profile configuration to default profile	No
getver	Device / Modem / Code version information.	Yes
getinfo	Device runtime system information.	Yes
deleterecords	Delete all records saved on FLASH	Yes
getio	Readout analog input,digital input and output.	Yes
readio #	Returns IO status, # AVL ID.	Yes
setdigout ## Y1 Y2	Set digital output. 1.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT1. 2.# – 0 or 1 (0 - OFF or 1 – ON) for DOUT2. Y1 – timeout value for DOUT1 if needed (in seconds). Y2 – timeout value for DOUT2 if needed (in seconds).	Yes
setdigout X Z Y	set selected digital output X – number of Digital output (1 – digital output 1; 2 – digital output 2). Z – activate(1)/deactivate(0). Y – activation/deactivation timeout.	Yes
getparam #	Returns selected parameter value, # param ID.	Yes
getparam 1271 X	X values can be 1,2,3.	Yes
setparam #:#	Sets selected parameter value. 1.# - ID value. 2.# - New first Parameter Value.	Yes
flush #,#,#,#,#,#,#	Initiates all data sending to specified target server. 1.# - IMEI. 2.# - APN. 3.# - LOGIN. 4.# - PASS. 5.# - IP. 6.# - PORT. 7.# - MODE (0-TCP/1-UDP).	No
readops #	1 – send first 20 operator codes 2 – send from 21st to 40th operator codes. 3 – send all other operator codes.	No
sn #	Static navigation, 1 – enable, 0 – disable	Yes
banlist #	Banned operators information.	Yes
crashlog #	Device last information before unexpected reset.	Yes
setkey # #	Add new or change current configuration keyword. 1.# - old keyword (if adding new keyword space). 2.# - new keyword.	Yes
delkey #	Remove existing keyword. 1.# - old keyword.	Yes
delete_all_sms	Deletes all SMS	No

Commands related to features

Command	Description	Response
fc_reset	Resets fuel consumption parameters.	Yes
towingreact	Towing reactivation.	Yes
auto_calibrate:set	Calibrate position if car accelerate straight to > 30 km/h for 5 sec.	Yes
auto_calibrate:get	Returns the state of calibration.	Yes
odoset:#	Set total odometer value. # - new odometer value in km.	Yes
odoget	Display current odometer value.	Yes
on_demand_trackingX	X=0 – Stops Tracking on Demand functionality. X=1 – Starts Tracking on Demand functionality. X=2 – Generates one high priority record and inititates data sending to server.	Yes

Commands related to Bluetooth

Command	Description	Response
btgetlist #	Returns requested Bluetooth list. # - 0,1 or 2 (0 – Discovered, 1 – Paired, 2 – Connected).	Yes
btscan	Starts Bluetooth scan.	Yes
btvisible #	Sets Bluetooth to visible with TMO. # - visibility TMO (from 1 to 255 seconds).	Yes
btrelease #	Disconnects from current device and pauses auto connect functionality for TMO. # - none or TMO (from 1 to 255 seconds).	Yes
btunpair #	Unpair Bluetooth device. # - all, BT address (all – unpair all devices, BT address – unpair only specified MAC address).	Yes

Commands related to OBD

Command	Description	Response
obdinfo	If connected with Blue-tooth OBD dongle displays all available information from OBD.	Yes
faultcodes	If connected with Blue-tooth OBD dongle display all visible fault codes.	Yes
cleardtc	Clears all vehicle stored fault codes.	No
getvin	Get vehicle VIN code, if OBD dongle is connected.	Yes

Commands related to LV-CAN200/ALL-CAN300

Command	Description	Response
lvcansetprog #	Set program number to LV-CAN200/ ALL-CAN300 that is connected to FMB1YX. # three digit number that identity vehicle.	Yes
lvcansimpletacho #	Add or remove simpletacho start byte. # - 0 or 1 (0 – don’t add start byte, 1 – add start byte).	No
lvcangetprog	Get program number from LV-CAN200/ ALL-CAN300 that is connected to FMB1YX.	Yes
lvcangetinfo	Get information about connected LV-CAN200/ALL-CAN300.	Yes
lvcanclear #	Clear Total Mileage (counted), Engine Work Time (counted), Fuel Consumed (counted) parameters values. # - parameter (0 – Engine work time (counted), 1 – Fuel Consumed (counted), 2 – Vehicle Mileage (counted))..	Yes
allcanmode	Turn on ALL-CAN300 mode.	Yes
lvcanmode	Turn on LV-CAN200 mode.	Yes
lvcanfaultcodes	Read DTC fault codes.	Yes