Changes

=='''How to insert Micro-SIM card and connect battery'''==

=='''How to insert Micro-SIM card and connect battery'''==

# Insert the SIM tray removal tool into the hole on the SIM card tray, and then push until the tray pops out.

# Open the top cover of the device. Cover is opened by unclipping it at the recessed corner.

# Insert '''Nano-SIM card''' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the tray.

# Insert '''Nano-SIM card'' as shown with '''PIN request disabled''' or read our Wiki how to enter it later in Teltonika Configurator. Make sure that Nano-SIM card is fitted properly into the holder.

# Attach the SIM card tray back.

# Connect the battery as shown in the figure.

# Connect the battery as shown to device.

# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.

# After '''configuration''', see “PC Connection (Windows)”, attach device '''cover''' back.