ATC704 SMS/GPRS Command List
ATC704 > ATC704 SMS/GPRS Command List
This page lists SMS/GPRS commands for the ATC704 device.
General information:
- A single SMS/GPRS command is limited to 160 characters.
- GPRS commands require the Codec 12 protocol.
- SMS and GPRS commands are not received while the device is in Deep Sleep or Power Off Sleep modes. In these modes, the GSM/GPRS module is powered down, meaning the device is not registered on the mobile network and cannot accept incoming commands. For more information on sleep modes, see Power saving settings.
Command Syntax
Before all SMS/GPRS commands, enter the password OR a whitespace (when password is not set).
All commands are case-sensitive.
Always check the syntax of your desired command in its dedicated page.
General command structure:
<password><space><command><space><argument1><space><argument2>...
Examples:
- getinfo command, password "1234":
1234 getinfo - getinfo command, password not set:
getinfo(note the whitespace before command) - readavl command, password "1234", single argument:
1234 readavl 69 - getparam command, password not set, multiple arguments:
getparam 2001;2002(note the whitespace before command) - setparam command, password "1234", multiple arguments with values:
1234 setparam 2001:wap;2002:user;2003:pass
Note! In some Apple iOS devices, any whitespace in the beginning of a message is automatically removed under certain conditions. This may affect SMS parsing in the receiving device.
Command List
The following commands apply to FT platform devices with firmware version 3.7.0.rc.22 or newer.
Basic Commands
These are the basic SMS/GPRS commands, applicable for most Teltonika devices.
| COMMAND | DESCRIPTION | SYNTAX EXAMPLE |
|---|---|---|
| allver | Returns information about device firmware and hardware. | allver |
| battery | Returns information about battery status. If battery is not present voltage and current will return zero value. | battery |
| cpureset | Restarts device. | cpureset |
| deleterecords | Deletes all records inside device. | deleterecords |
| delkey | Deletes current primary key. | delkey <old_keyword> |
| delsecondkey | Deletes current recovery key. | delsecondkey <old_keyword> |
| extformat | Quick formats external storage. | extformat |
| fall_down_reset | Triggers fall down reset. | fall_down_reset |
| fwstats | Information regarding firmware update statistics. | fwstats |
| getgps | Returns information string regarding GNSS. | getgps |
| getimeiccid | Returns information about modem IMEI and SIM CCID. | getimeiccid |
| getimsi | Returns IMSI code of currently used SIM card. | getimsi |
| getinfo | Returns information string. | getinfo |
| getops | Returns list of currently visible operators. | getops |
| getparam | Get configured parameter value. | getparam <param_id1>;<param_id2>;... |
| getrecord | Generates a high priority record so force device to send all records to the server. | getrecord |
| getstatus | Get status about device. | getstatus |
| getver | Returns code version, device IMEI, modem app version, RTC time, Init time, etc. | getver |
| getvin | Returns VIN code that is currently used. | getvin |
| ggps | Returns information about current date, time, speed, device coordinates and a link to Google Maps with current position. | ggps |
| readavl | Returns information string regarding AVL ID value. | readavl <AVL_ID> |
| setkey | Set new or change current primary key. | setkey <old_keyword> <new_keyword> |
| setparam | Change configurable parameter value. | setparam <param_id1>:<value>;<param_id2>:<value>;... |
| setsecondkey | Set new or change current recovery key. | setsecondkey <old_keyword> <new_keyword> |
| towingreact | Reactivates towing Detection scenario. Intended for use in case of a fake towing detection event. | towingreact |
| wdlog | Returns information about the recent watchdog events. | wdlog |
| web_connect | Triggers FOTA service/connection. | web_connect |