EYE FUNCTIONALITIES NEW

This page will describe EYE device functionalities, their flow and functionality supporting software versions.

SW version requirements	EYE APP: 1.2.0-60+ Firmware: 1.2.8.R.1+
Step No.	1	2	3	4
Short step desc.	Tap the selected device to connect to it	Wait for connection	Enter PIN	Successfully connected
Successful attempt at functionality visual

Step No.	1	2	3	4	5
Short step desc.	Tap the selected device to connect to it	Wait for device to connect	Enter PIN	You have connected to the device	Device is fully locked
Additional desc.	Tap the selected device to connect to it	Incorrect PIN has been entered 5 times	Device is locked for 5 min but will allow to connect with PIN again after timeout	Incorrect PIN has been entered 5 times	Device is locked, PIN will no longer be accepted until correct PUK code is entered
Failed attempt at functionality visual

SW version requirements	EYE APP: 1.2.0-60+ Firmware: 1.2.8.R.1+
Step No.	1	2	3
Short step desc.	Tap the blocked device to connect to it	Enter PUK	Connected
Additional desc.			PIN automatically resets to default
Successful attempt at functionality visual

Step No.	1	2
Step desc.	Tap the selected device to connect to it	Enter PUK incorrectly
Additional desc.	Tap the selected device to connect to it	PUK is rejected and you can only go back or enter correct PUK
Failed attempt at functionality visual

SW version requirements	EYE APP: 1.2.0-60+ Firmware: 1.2.8.R.1+
Step No.	1	2	3
Short step desc.	While connected and in overview tap "Send device to sleep"	Confirm your selection	Wait for EYE App to disconnect
Additional desc.			Device is no longer connectable or findable until wake up step is performed.
Successful attempt at functionality visual

SW version requirements	Firmware: 1.2.8.R.1+
Step No.	1-3	4
Short step desc.	Attach magnet to sleeping device and wait for LED to blink.	Device starts broacasting
Additional desc.		Now device is discoverabled, scannable, connectable via BLE.
Successful attempt at functionality visual