FM36 setdigout

Sets digital outputs to ON or OFF state (for some time if needed). Value is written as a row for OUT1 and OUT2 values.

• Example: ‘setdigout 01 0 5’ will set OUT2 to high level for 5 seconds, while OUT1 to low level.
  

To ignore one digital output value and make ON/OFF state only to another digital output in place of 0 or 1 values, “?” must be used.

• Example: ‘setdigout ?1’ will set OUT2 to high level for indefinite period of time while OUT1 remains as it was set before.