Main Page > EOL Products > FM6300 > FM6300 Product Change NotificationsProduct change notifications (PCN) is the way of informing customers of upcoming changes related to Teltonika products. This includes outward appearance adjustments, hardware improvements, firmware changes, changes to package contents, etc.
This page stores information regarding changes to the FM6300 tracking device. Below you will find a list of both upcoming and already implemented changes sorted from newest to oldest (top to bottom).
2020.11.24: GNSS antenna changes
We would like to inform you about the GNSS antenna changes for FM6300 starting from late December 2020 - early January 2021.
| Change description
|
| Change type
|
Mechanical part changes
|
| Detailed description
|
Old version: 
Dimensions - 45.2x35.8x15.1 mm
Center frequency - 1575.42 MHz, 1600 MHz
Bandwidth - 10 MHz
VSWR on bandwidth - <1.5
GAIN - 3 dB
LNA minimum gain - 26 dB
LNA maximum gain - 30 dB
Consumption - 11 mA
|
New version: 
Dimensions - 46x44x13 mm
Center frequency - 1575.42 MHz, 1602 MHz
Bandwidth - 35 MHz
VSWR on bandwidth - <1.9
GAIN - 3 dB
LNA minimum gain - 26.5 dB
LNA maximum gain - 29.5 dB
Consumption - 9 mA
|
| Change reasons
|
According to technical comparison new antenna is better by next parameters: center frequency, bandwidth, consumption. Other parameters are the same. Moreover, the new antenna is thinner, which gives the opportunity to mount it, where it was not possible before and makes installation easier.
|
| Product release date
|
Late December 2020 - Early January 2021
|
| Affected products
|
| Model
|
Affected order codes
|
Order code changes
|
| FM6300
|
FM6300*******order codes
|
No changes
|
| Change impact
|
| Risk assessment
|
No risk factors encountered with this change
|
| Suggested implementation plan
|
No implementation plan needed
|
2020.08.10: Base firmware update
We would like to inform you about the base firmware update for FM6300 starting from August 10th, 2020. New production firmware version will be 01.00.34.
| Change description
|
| Change type
|
Firmware update
|
| Detailed description
|
Key improvements from last production firmware are listed in errata: https://wiki.teltonika-gps.com/view/FM6300_firmware_errata
|
Old version:
FM6300 01.00.17
|
New version:
FM6300 01.00.34
|
| Change reasons
|
FM6300 base firmware version update
|
| Product release date
|
2020 August 10th.
|
2019.07.22: new no brand Eco friendly boxes
Effective September 2019, FM6300 trackers with no brand packaging will be shipped with a new no brand eco-friendly box.
| Change description
|
| Change type
|
Packaging
|
| Detailed description
|
Improved and more environmentally friendly packaging box
|
Old single packaging version:
Dimensions: 177 (W) x 145 (D) x 64 (H)
|
New single packaging version:
Dimensions: 173 (W) x 148 (D) x 71 (H)
|
| Change reasons
|
The new box is better for the environment
|
| Product release date
|
Devices with new packaging will be released in manufacturing from September with 2 months of transition period. Over this period devices with white packaging can be delivered as well as devices with the new eco boxes.
|
| Affected products
|
| Model
|
Affected order codes
|
Order code changes
|
| FMB640, FMB630, FM6300.
|
FMB640******, FMB630******, FM6300******.
|
No changes
|
| Change impact
|
| Risk assessment
|
No risk factors encountered with this change
|
| Suggested implementation plan
|
Due to the new look of boxes we strongly recommend to update your marketing materials. Because of the new color of the packaging box, if necessary, update your branding materials (stickers, logo layouts).
|
| Acknowledgement of PCN receipt
|
| If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
|
2019.04.10: IMEI/SN display on device Changes
We would like to inform you, that IMEI/SN info display on the FM6300 device will be updated in the factory from June 2019.
| Change description
|
| Change type
|
External/visual
|
| Detailed description
|
IMEI/SN info on device display change from barcode to QR
|
Old Version:
|
New Version:
|
This change will not affect device packing and logistic lists. It will remain as barcode.
|
| Change reasons
|
QR format will increase reliability and minimize error rate, because of the error correction feature and improved reading in low contrast.
|
| Product release date
|
Devices with new QR Code format will be released in manufacturing from June with 2 months of transition period. Over this period devices with barcode can be delivered as well as devices with QR code.
|
| Affected products
|
| Model
|
Affected order codes
|
Order code changes
|
| FM6300
|
FM6300******
|
No changes
|
| Change impact
|
| Risk assessment
|
Risk assessment for devices managament required
|
| Suggested implementation plan
|
Due to changes in device information display we strongly recommend to check, and prepare your tools to read QR codes.
|
| Acknowledgement of PCN receipt
|
| If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
|
To download the pdf version of this notification, click here.
2019.02.18: Top Tampography Changes
We would like to inform you, that tampography of the FM6300 device was updated in the factory on the 18th of March.
| Change description
|
| Change type
|
External/visual
|
| Detailed description
|
Top tampography design changed
|
Old Version:
|
New Version:
|
| Change reasons
|
1. Updated Teltonika address to Saltoniskiu st. 9B-1
2. Added WEEE label. (WEEE - Waste from Electrical and Electronic Equipment)
|
| Product release date
|
Updated tampography will be used from the time when the stock will be sold all leftovers.
|
| Affected products
|
| Model
|
Affected order codes
|
Order code changes
|
| FM6300
|
FM6300*******
|
No changes
|
| Change impact
|
| Risk assessment
|
No risk factors encountered with this change
|
| Suggested implementation plan
|
Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process.
|
| Acknowledgement of PCN receipt
|
| If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
|
To download the pdf version of this notification, click here.
2019.01.18: new eco friendly box
Effective January 2019, week 4, FM6300 trackers will be packed with a new eco-friendly box.
| Change description
|
| Change type
|
Packaging
|
| Detailed description
|
Improved and more environmentally friendly packaging box
|
Old version:
|
New version:
|
| Change reasons
|
The new box is better for the environment
|
| Product release date
|
January 2019, week 4
|
| Affected products
|
| Model
|
Affected order codes
|
Order code changes
|
| FM6300
|
FM6300******
|
No changes
|
| Change impact
|
| Risk assessment
|
No risk factors encountered with this change
|
| Suggested implementation plan
|
Due to changes in device appearance we strongly recommend to contact your customs agent with our change log information, to avoid any unexpected delays in customs clearance process.
|
| Acknowledgement of PCN receipt
|
| If no feedback is received within two weeks after the issue date of this notification - Teltonika may accept that this change has been tacitly accepted and can implement the change as indicated above
|
To download the pdf version of this notification, click here.
