FMB630 External Devices
From Wiki Knowledge Base | Teltonika GPS
This is the approved revision of this page, as well as being the most recent.
Main Page > End of Life Products > FMB630 > FMB630 Configuration > FMB630 External Devices
External Devices do not depend on selected profile; they are common for all profiles. To configure these parameters choose the TAB named “External Devices” and make all necessary changes.
|Parameter Name||Parameter description|
|FMS/Tachograph Settings||Are used to configure CAN line and Tachograph setting such as Enable/Disable, baudrate, operation mode, tachograph ignition source, tachograph type.|
|Tacho Web||User can enable Web DDD synchronization functionality; enter tacho web server domain and port.User can enable Web DDD synchronization functionality; enter tacho web server domain and port.|
|Tacho Web start delay||When ignition is on Tacho web starts after this delay.|
|Analog Input Settings||User can change the range of analog inputs. There are two possible changes: 10 V (0-10 V) and 30 V (0-30 V).|
|COM1 and COM2 Settings||Configures COM1 and COM2 ports. User can configure baudrate, working mode, enable/disable timestamp and change CMD ID(used to identify from which COM port data came)|
|COM start/end byte||COM1 and COM2 start and end byte are filter for TCP Binary link mode.|
|RS485 Settings(COM1)||Configures RS485 settings such as activation of RS485 protocol, baudrate and working mode.|
|LLS Sensor Settings||Allows user to set LLS sensors addresses in preffered order|