FMB962 General description

From Wiki Knowledge Base | Teltonika GPS
Main Page > EOL Products > FMB962 > FMB962 Manual > FMB962 General description

FMB964 is a tracking terminal with GNSS and GSM connectivity, which is able to collect device coordinates and transfer them via GSM network to a server. This device is perfectly suitable for applications, which require the location acquirement of remote objects.

Package contents1 The FMB962 device is supplied to the customer in a cardboard box containing all the equipment that is necessary for operation. The package contains:

  • Already implemented FMB962 device into case;
  • Top and bottom device cover parts;
  • Input and output power supply cable with a 1x5 connection pins, which is already installed into device.
  • 400 mAh Ni-MH rechargeable 7.2 V battery.

Basic characteristics

Basic characteristics GSM / GPRS / GNSS features:

  • Teltonika TM2500 quad band module (GSM 850 / 900 / 1800 / 1900 MHz);
  • GPRS class 12;
  • SMS (text, data).
  • Integrated GNSS receiver
  • Up to -162 dBm GNSS receiver sensitivity.

Hardware features:

  • Built-in movement sensor;
  • Built-in blue-tooth 3.0;
  • Internal High Gain GNSS antenna;
  • Internal High Gain GSM antenna;
  • microSD card reader (up to 32Gb, FAT32);
  • 400 mAh Ni-MH rechargeable 7.2 V battery.

Interface features:

  • Power supply: 6 ÷ 30V;
  • 1 digital input;
  • 1 analog input;
  • 1 open collector digital output (connecting external relays, LED, buzzers etc.);
  • 2 LEDs indicating device status.

Special features:

  • Fast position fix;
  • High Quality track even in high density urban canyon;
  • Ultra small case;
  • Ready for harsh environment;
  • Color ribbon non-detachable cable;
  • Easy to mount in limited access areas;
  • Firmly fasten;
  • High gain internal GNSS and GSM antennas;
  • 2 LED status indication;
  • Real-Time tracking;
  • Smart data acquisition based on:
    • Time;
    • Angle;
    • Distance;
    • Ignition or any other I/O event;
  • Sending acquired data via GPRS;
  • GPRS and SMS I/O events;
  • Virtual odometer;
  • Jamming detection
  • Configurable using Secured SMS Commands;
  • Overvoltage protection.

Technical features

Part name Physical specification
Navigation indication LED
Modem indication LED
Socket Soldered inner socket
USB Micro USB socket
Technical details
2 W max.
Current consumption at 12 V
GPRS: average 60 mA rms
Nominal: average 27 rms
GPS sleep: average 3.27 mA
Deep Sleep: average 3 mA
Online Deep Sleep: average 2.89 mA
Ultra Deep Sleep: average 1.60 mA
Rated current: 250 mA
Battery charge current Average 140 mA
Operating temperature -25..+55 °C
Storage temperature -20..+45 °C
Storage relative humidity 5..85% (no condensation)

Dimension drawing:


Technical information about internal battery

Internal back-up battery Battery voltage (V) Nominal capacity (mAh) Power (Wh) Charging temperature (°C)
Li-Po rechargeable battery 3.4~4.1 1800 6.21 – 7.38 0 – 45

Batteries are covered by 6 month warranty support.

Bw disposal.png Battery should not be disposed of into general household waste.
Bring damaged or worn-out batteries to your local recycling center or dispose them into a battery recycle bin commonly found in supermarkets.

Electrical characteristics

Characteristic description Value
Min. Typ. Max. Unit
Supply Voltage:
Supply Voltage
(Recommended Operating Conditions)
6 30 V
Digital Output (Open Drain grade):
Drain current (Digital Output OFF) 120 µA
Drain current
(Digital Output ON, Recommended Operating Conditions)
0.1 0.5 A
Digital Input: 300
Digital Output (Open Drain grade):
Input resistance (DIN1) 47
Input voltage
(Recommended Operating Conditions)
0 Supply voltage V
Input Voltage threshold (DIN1) 4 V
Analog Input:
Input voltage
(Recommended Operating Conditions)
0 30 V
Input resistance 150
Measurement error on 12 V 3 %
Additional error on 12 V 360 mV
Measurement error on 30 V 3 %
Additional error on 30 V 900 mV

Analog Input error margin can increase if temperature varies.

Absolute maximum ratings

Characteristic description Value
Min. Typ. Max. Unit
Supply Voltage
(Absolute Maximum Ratings)
-32 +32 V
Drain-Source clamp threshold voltage
(Absolute Maximum Ratings), (Idrain = 2 mA)
+36 V
Digital Input Voltage
(Absolute Maximum Ratings)
-32 +32 V
Analog Input Voltage
(Absolute Maximum Ratings)
-32 +32 V