FMC001 SMS/Call settings

From Wiki Knowledge Base | Teltonika GPS
This is the approved revision of this page, as well as being the most recent.
Main Page > Easy Trackers > FMC001 > FMC001 Configuration > FMC001 SMS/Call settings

SMS Data Sending

These settings allow sending AVL data using binary SMS. AVL data will be sent by SMS only when there is no GPRS connection. This setting does not affect replies to SMS request messages – answers are always sent back to the sender's telephone number.

Fmb001 smscall settings.png

SMS commands

Essential fields in SMS/Call settings are Login and Password. The login and password are used with every SMS sent to FMC001. If login and password are not set, in every SMS sent to FMC001 device two spaces before command have to be used (<space><space><command>).
Command structure with set login and password:
<login><space><password><space><command>, for example: "asd 123 getgps"
Phone numbers have to be written in international standard, using "+" is optional but not necessary (in both cases number will be recognized, but when number is without "+" symbol, IDD Prefix will not be generated, which depends on location of the phone). If no numbers are entered, configuration and sending commands over SMS are allowed from all GSM numbers.

Incoming Call settings

Incoming Call Action parameter defines device action during incoming call:

  • Do Nothing.
  • Hang-up – Automatically hang up an incoming call.
  • Report Position – Report position to calling number via SMS.
  • Auto Answer (HF) – Auto answer an incoming call if device is paired with a hands-free kit.

Hands Free Call settings

When FMC001 is connected to a hands-free headset, it can call to user defined GSM numbers.

Fmb001 handsfree.png

Outgoing Call Trigger parameter determines which event will trigger a call. FMC001 supports two call trigger settings:

  • None selected – disables call trigger functionality.
  • Crash Event – crash event triggers a call to user selected GSM number.

FMC001 works in synchronized GPS time which is UTC+0, with this option customer can configure the time zone and get SMS messages with correct time.

Bw nb.png Please do not set Data Send Number to some cell phone number, because it will not understand binary SMS. When sending a binary SMS to a phone number, which is a server phone number, the server can interpret and understand binary code, so the data can be read and you can view it on the server.
Bw nb.png SMS login and password and authorized numbers list are used to protect FMC001 module from unauthorized access. Module accepts messages only from a list of authorized numbers and with proper module login and password. Phone numbers have to be written in international standard using "+" or without using it (in both cases the number will be recognized). If no authorized numbers are entered, module accepts messages from all numbers.