FMM130 LED status
From Wiki Knowledge Base | Teltonika GPS
This is the approved revision of this page, as well as being the most recent.
This section is an explanation of LED indications on an FMM1YX device.
|Permanently switched on||GNSS signal is not received|
|Blinking every second||Normal mode, GNSS is working|
|Off||GNSS is turned off because:|
Device is not working
Device is in sleep mode
|Blinking fast constantly||Device firmware is being flashed|
Status LED Indications
|Blinking every second||Normal mode|
|Blinking every two seconds||Sleep mode|
|Blinking fast for a short time||Modem activity|
|Off||Device is not working|
Device is in boot mode