Small 4G LTE (CAT M1) tracker for e-bikes, e-scooters and e-forklifts with CAN interface and 10-97 V power supply range
FTM305
KNOW YOUR DEVICE
SET UP YOUR DEVICE
Physical SIM card insertion/removal must be performed when device is powered off – external voltage disconnected. Otherwise, the SIM card might be damaged or device will not detect it.
PINOUT
PIN NUMBER
PIN NAME
DESCRIPTION
1
VCC
(Red) Power supply (+10-97 V DC) (+).
2
GND
(Black) Ground (-).
3
DIN1 / AIN1 / 1-W
(Yellow) Digital input channel 1 / Analog input channel 1 / Data channel for 1-Wire devices.
4
DOUT1
(Grey) Digital output, channel 1.
5
DOUT2
(White) Digital output, channel 2.
6
CAN H
(Brown/White) CAN interface High.
7
CAN L
(Brown) CAN interface Low.
PC CONNECTION (WINDOWS)
Connect device to computer using USB Type-C cable. Please note: FTM305 device does not require an external power supply for configuration. However, without external power, data sending and other cellular connectivity functions will not work. If you want to test the device on a table, it is advised to power up FTM305 with a DC voltage (10-97V) power supply using power wires.
Setup will continue installing the driver and eventually the confirmation window will appear. Click Finish to complete the setup.
CONFIGURATION (WINDOWS)
Most Teltonika devices are shipped with default factory settings. Use Telematics Configuration Tool (TCT) to change these settings according to your needs.
Configurator
TCT
Operating system
Windows 7 Windows 8.1 Windows 10 Windows 11
Windows 10 Windows 11
MS .NET Framework
version
MS .NET
framework 5.0
MS .NET framework 6.0
Version
64 bit
64 bit
Disk Storage
1 GB of free disk space
Internet
Ethernet port or Wi-Fi w/ network access for auto-update
TCT
Download the TCT (compressed archive).
Extract the archive and launch the executable. The TCT will be installed.
Launch the TCT.
Go to Settings -> User keys, then copy and paste the full key text in Add new key field:
BEGIN TCT KEY
type: ExpFWKey
description: FTx305 with develop version firmware
key: 7394b05f-f32a-4648-bd03-d61e7dfd0175
expires: 2025-06-30
signature: v1|Gr108NPI3QiXElpAEIZMtAvfc9l8EI0apf/yvXyShjhiEFh4jPh9auTJg0K4RLZfJXkF9bhm3s93aMjiXsKDeldi21YSnLxY1oaCRhQGowPQcxcTmZv74OMwX5gf5qZG2hbLdKQEpg3bis1lZNnBDphYtG2eqPiiPgSaBmgAfU01cMpdXahLhruOZFVqQC5hWkPiVRCmcf2Cez7aXW8Vji5hGCTqmzVkbsl+/ZsMSnKyZfbYCL8QwzbLtAFdmI0XWXVFtyBXAIgSJeqbrsHOgtQDB8e34zbBn3IzY0GhYqTKMc20Dt9jDn8VBhsCIXlK4zNua3j2vnyHXpF8rl5UJA==
END TCT KEY
Note: This TCT key will expire on 2025-06-30. Please contact us via HelpDesk to receive a new one before the expiration date.
In the Discovered devices list, select your device and press Configure.
The Device status window opens. It contains device, GNSS, and Cellular information.
Save to device – saves configuration to device.
Upload file – loads configuration from file.
Save to file – saves configuration to file.
Update – update device firmware.
Reset configuration – sets device configuration to default.
Most important configuration sections are Mobile network (Server, Mobile network settings) and Tracking settings (data collection parameters). More details about FTM305 configuration using TCT can be found here.
QUICK SMS CONFIGURATION
The default configuration ensures best track quality and optimal data usage.
Quickly set up your device by sending this SMS command to it:
DEFAULT CONFIGURATION SETTINGS
After successful SMS configuration, FTM305 device will synchronize time and update records to configured server. Time
intervals and default I/O elements can be changed by using TCT or Parameter list.
MOUNTING RECOMMENDATIONS
CONNECTING WIRES
Wires should be fastened to the other wires or nonmoving parts. Do not place the wires near moving or heat-emitting objects.
All electrical connections must be properly isolated. No bare wires should be visible. Re-apply isolation to wires if you removed factory isolation during installation.
If the wires are placed in the exterior or in places where they can be damaged or exposed to heat, humidity, dirt, etc., additional isolation should be applied.
CONNECTING POWER SOURCE
Ensure that after the vehicle computer falls asleep, power is still available on chosen wire. Depending on vehicle, this may happen in 5 to 30 minutes period.
When module is connected, measure voltage again to make sure it did not decrease.
It is recommended to connect main power cable to the main battery of the vehicle.
CONNECTING IGNITION WIRE
Make sure that you have selected the correct wire for ignition signal - the electrical signal from the wire should be present after starting the engine.
Check if this is not an ACC wire (when key is in the first position, most of the vehicle electronics are ON).
Check if power is still available when you turn off any of vehicles devices.
Ignition is connected to the ignition relay output. As alternative, any other relay, which has power output when ignition is on, may be chosen.
CONNECTING GROUND WIRE
Ground wire must be connected to the vehicle frame or metal parts that are fixed to the frame.
If the wire is fixed with the bolt, the loop must be connected to the end of the wire.
For better contact scrub paint from the spot where loop is going to be connected.
LED INDICATIONS
This section is an explanation of LED indications on FTM305 device.
NAVIGATION LED INDICATIONS
Behaviour
Meaning
Permanently switched on
GNSS signal is not received
Blinking every second
Normal mode, GNSS is working
Off
GNSS is turned off because: Device is not working or Device is in sleep mode
Blinking fast
constantly
Device firmware is being flashed
STATUS LED INDICATIONS
Behaviour
Meaning
Blinking every second
Normal mode
Blinking every two seconds
Sleep mode
Blinking fast for a
short time
Modem activity
Off
Device is not working or Device is in boot mode
BASIC CHARACTERISTICS
Module
Name
FTM305-Q2AB0: Quectel BG95-M1, internal antennas, casing version FTM305-Q3AB0: Quectel BG95-M3, internal antennas, casing version FTM305-Q5AB0: Quectel BG95-M6, internal antennas, casing version
